Conference Agenda
Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).
|
Session Overview |
Date: Tuesday, 03/Sept/2024 | |
9:00am - 12:00pm | AAD Part I: Avicenna Alliance Day (AAD) Part I Location: 05.019 Led by Thierry Marchal |
12:00pm - 1:00pm | Break I: Break Location: Foyer II (In front of auditoriums) |
1:00pm - 5:00pm | AAD Part II: Avicenna Alliance Day (AAD) Part II Location: 05.019 Led by Thierry Marchal |
1:00pm - 6:00pm | ISW: In silico World - final meeting (ISW) Location: -2.030 (Small auditorium) Led by Marco Viceconti |
3:00pm - 4:30pm | WS Modeling: Modeling Software Platforms Location: 01.015 Led by Herbert Sauro |
5:00pm - 6:00pm | VPH BoD: VPH Board of Directors Location: 10.017 |
6:00pm - 10:00pm | Student event: Student social event Location: Foyer II (In front of auditoriums) |
Date: Wednesday, 04/Sept/2024 | |
8:00am - 8:45am | Registration: Registration Location: Foyer I (Entry area) |
8:45am - 9:00am | Opening: Opening Location: -2.033 (Big auditorium) |
9:00am - 9:55am | Towards a full digital liver twin: drug injury, regeneration and disease progression Dirk Drasdo INRIA Location: -2.033 (Big auditorium) |
|
[Single Presentation of ID 483]: 1
|
10:00am - 10:30am | Coffee break: Coffee break Location: Foyer II (In front of auditoriums) |
10:30am - 12:00pm | 1.A: Computational Modelling of the Heart Location: 05.019 Chair I: David Nordsletten Chair II: Mathilde Verlyck |
|
10:30am - 10:45am
1.A: 1 Computational models of cardiac function – Closing the gaps between virtual and physical reality Medical University of Graz, Austria 10:45am - 11:00am
1.A: 2 A multiscale finite element model of cardiac growth and baroreflex regulation 1University of Kentucky, United States of America; 2Michigan State University, United States of America 11:00am - 11:15am
1.A: 3 Full personalisation of 3D biventricular models from electroanatomical mappings and cardiac magnetic resonance imaging to understand the impact of arrhythmic substrate components on electrophysiological function 1Centre Inria d'Université Côte d'Azur, France; 2IHU-Liryc, Université de Bordeaux, Pessac, France; 3Sunnybrook Research Institute, Toronto, Canada 11:15am - 11:30am
1.A: 4 A multi-scale analysis of the impact of measurement and physiological uncertainty on electrocardiograms 1Imperial College London; 2King's College London; 3Medical University of Graz; 4BioTechMed-Graz; 5The Alan Turing Institute 11:30am - 11:45am
1.A: 5 Titin-mediated viscoelastic passive muscle mechanics 1Department of Molecular and Integrative Physiology, University of Michigan, Ann Arbor, MI, USA; 2Departments of Biomedical Engineering and Cardiac Surgery, University of Michigan, Ann Arbor, MI, USA; 3Veterans Affairs Medical Center, San Francisco, CA, and Department of Medicine, University of California, San Francisco, CA, USA |
10:30am - 12:00pm | 1.B: Multi-X Vascular Modelling Location: 02.017 Chair I: Thierry Marchal |
|
10:30am - 10:45am
1.B: 1 Multiscale fluid-structure interaction for the effective modeling of vascular tissues 1WIAS Berlin, Germany; 2University of Pisa; 3University of Augsburg; 4University of Trento; 5Politecnico di Milano 10:45am - 11:00am
1.B: 2 An automated pipeline to investigate the impact of intracranial internal carotid artery calcifications on cerebrovascular events 1Department of Biomechanical Engineering, Delft University of Technology, Delft, The Netherlands; 2Department of Biomedical Engineering, Erasmus Medical Center, Rotterdam, The Netherlands; 3Department of Epidemiology, Erasmus Medical Center, Rotterdam, The Netherlands; 4Department of Neurology, Erasmus Medical Center, Rotterdam, The Netherlands; 5Department of Radiology, Erasmus Medical Center, Rotterdam, The Netherlands 11:00am - 11:15am
1.B: 3 Impact of atrial rotor dominant frequency on flecainide and vernakalant cardioversion ratio 1Centro de Investigación e Innovación en Bioingeniería (Ci2B), Universitat Politècnica de València, Spain; 2Grupo de investigación de alto rendimiento en Ingeniería Biomédica y Ciencia de Datos (BigMed+), Universidad Rey Juan Carlos, Spain; 3Centro Nacional de Investigaciones Cardiovasculares (CNIC), Madrid, Spain 11:15am - 11:30am
1.B: 4 Predicting chronic cardiac responses to angiotensin receptor/neprilysin inhibitor using a physiological model of heart failure with preserved ejection fraction 1University of Mississippi Medical Center, United States of America; 2HC Simulation 11:30am - 11:45am
1.B: 5 Coagulation cascade systems modeling for oral anticoagulant monitorization in atrial fibrillation patients BCN MedTech, Department of Information and Communication Technologies, Universitat Pompeu Fabra, Spain |
10:30am - 12:00pm | 1.C: Liver & Eye Modelling Location: 02.011 Chair I: Dominik Schillinger Chair II: Uta Dahmen |
|
10:30am - 10:45am
1.C: 1 A multiscale and multiphase digital twin of function-perfusion processes in the human liver 1University of Stuttgart, Germany; 2Humboldt Universität zu Berlin, Germany; 3University Hospital Jena, Germany; 4University Hospital Leipzig, Germany 10:45am - 11:00am
1.C: 2 Patient specific prediction of portal vein pressure after liver surgery: Sensitivity, identifiability and uncertainty quantification 1Inria, France; 2Inrae, France; 3Université Paris-Saclay, France; 4Inserm Physiopathogénèse et traitement des maladie du foie, France 11:00am - 11:15am
1.C: 3 A multi-compartment perfusion model for hierarchical vessel networks with application to liver regrowth Technical University of Darmstadt, Germany 11:15am - 11:30am
1.C: 4 Towards sustainable simulation pipelines for human liver decision support 1Institute of Structural Mechanics and Dynamics in Aerospace Engineering, University of Stuttgart, Germany; 2Institute of Parallel and Distributed Systems, University of Stuttgart, Germany; 3Systems Medicine of the Liver Lab, Institute for Biology, Humboldt-University Berlin, Germany 11:30am - 11:45am
1.C: 5 Exploring ethnic diversity in glaucoma surgery efficacy using computational fluid dynamics 1The University of the Witwatersrand, Johannesburg, South Africa; 2Aston University, Birmingham, United Kingdom; 3University of Cape Town, Cape Town, South Africa 11:45am - 12:00pm
1.C: 6 A computational fluid dynamic study on graft detachment in the human eye for postoperative endothelial keratoplasty 1University of the Witwatersrand, South Africa; 2University of Cape Town, South Africa |
10:30am - 12:00pm | 1.D: Mitral Valve Replacements Location: 09.019 Chair I: Nils Karajan |
|
10:30am - 10:45am
1.D: 1 CANCELLED - Patient-specific long-term prediction of transcatheter edge-to-edge mitral valve repair University of Texas at Austin, United States of America 10:45am - 11:00am
1.D: 2 Functional assessment of patients with mitral valve defect augmented by biomechanical modeling: Contractile reserve of the heart and in-silico valve repair 1UT Southwestern Medical Center Dallas, Texas, USA; 2The University of Utah, Salt Lak City, UT, USA 11:00am - 11:15am
1.D: 3 Model reduction for fluid-solid simulations to assess hemodynamics of mitral valve regurgitation and repair 1MOX, Dipartimento di Matematica, Politecnico di Milano, Milan, Italy; 2TRIC-DT, The Alan Turing Institute, National Heart and Lung Institute, Imperial College London, London, UK; 3Department of Biomedical Engineering, University of Michigan, Ann Arbor, USA; 4Department of Cardiac Surgery, University of Michigan, Ann Arbor, USA 11:15am - 11:30am
1.D: 4 Influence of valve shape on mitral valve hemodynamics: An in-silico study 1Charité - Universitätsmedizin Berlin, Germany; 2Deutsches Herzzentrum der Charité, Institute of Computer-assisted Cardiovascular Medicine, Germany; 3Philips Innovation Technologies, Hamburg, Germany; 4Philips, Eindhoven, The Netherlands 11:30am - 11:45am
1.D: 5 Synthetic cohort of mitral valve anatomies based on statistical shape modeling 1Charité - Universitätsmedizin Berlin, Germany; 2Deutsches Herzzentrum der Charité, Institute of Computer-assisted Cardiovascular Medicine, Germany; 3ETH Zürich, Department of Information Technology and Electrical Engineering, Switzerland; 4Deutsches Herzzentrum der Charité, Department of Cardiothoracic and Vascular Surgery, Germany |
10:30am - 12:00pm | 1.E: Cartilage & Skin Location: 01.003 Chair I: Christian Bleiler |
|
10:30am - 10:45am
1.E: 1 Articular cartilage systems mechanobiology: A multiscale tissue model of the knee cartilage BCN MedTech, Universitat Pompeu Fabra, Spain 10:45am - 11:00am
1.E: 2 Pixel2Mechanics: Automated biomechanical simulations of high-resolution intervertebral discs from anisotropic MRIs 1BCN MedTech, Department of Information and Communication Technologies, Universitat Pompeu Fabra, Barcelona, Spain; 2Galgo Medical S.L., Barcelona, Spain; 33D-Shaper Medical S.L., Barcelona, Spain; 4IT, Department of Information Technology, InSilicoTrials Technologies, Trieste, Italy 11:00am - 11:15am
1.E: 3 Computational modeling of articular cartilage mechanics: Insights and validation University of Stuttgart, Germany 11:15am - 11:30am
1.E: 4 Application of an FSI-based model to optimize mechanically stimulated structured hydrogel scaffolds for cartilage cell differentiation Universität Rostock, Germany 11:30am - 11:45am
1.E: 5 Model investigation of the energy density resulting from the absorption and scattering of radiation in multi-layer skin tissue structures 1Institute of Structural Mechanics and Dynamics in Aerospace Engineering, Faculty of Aerospace Engineering and Geodesy, University of Stuttgart, Pfaffenwaldring, 27 Stuttgart, 70569, Germany; 2Biomechanic Lab, Institute of Structural Mechanics and Dynamics in Aerospace Engineering, Faculty of Aerospace Engineering and Geodesy, University of Stuttgart , Pfaffenwaldring 27, Stuttgart, 70569, Germany; 3Department of Visceral, Transplantation, Thoracic and Vascular Surgery, Leipzig University Hospital, Liebigstraße 20, Leipzig, 04103, Germany; 4Clinic and OPD for Oral and Maxillofacial Surgery / Plastic Surgery, Am Klinikum 1, Jena 07747, Germany 11:45am - 12:00pm
1.E: 6 Generality and applicability in developing virtual epithelial tissues models 1Indiana University, United Kingdom; 2Procter & Gamble |
10:30am - 12:00pm | 1.F: Big Data / Machine Learning I Location: 02.005 Chair I: Alina Roitberg Chair II: Estefanía Žugelj Tapia |
|
10:30am - 10:45am
1.F: 1 A computationally efficient deep learning model for high-resolution transient hemodynamics estimation in complex vascular geometries 1Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2Siemens Healthineers AG, Forchheim, Germany 10:45am - 11:00am
1.F: 2 Parameter estimation in cardiac biomechanical models based on physics-informed neural networks 1Department of Mathematics and Scientific Computing, NAWI Graz, University of Graz (Austria); 2Gottfried Schatz Research Center: Division of Biophysics, Medical University of Graz (Austria); 3BioTechMed-Graz (Austria); 4MOX, Department of Mathematics, Politecnico di Milano (Italy); 5Institute of Mathematics, EPFL (Switzerland) (Professor Emeritus) 11:00am - 11:15am
1.F: 3 Finite volume informed graph attention network for solving partial differential equations — Application to myocardial perfusion 1Inria, Palaiseau, France; 2CentraleSupelec, Inria, Université Paris-Saclay, France; 3HeartFlow Inc., Redwood City, USA; 4ESIEE, Université Gustave Eiffel, France 11:15am - 11:30am
1.F: 4 Machine learning-based models to predict axillary lymph node metastasis in breast cancer patients 1Oncological Pathology and Bioinformatics Research Group, Institut d'Investigació Sanitària Pere i Virgili, Tortosa, Spain; 2Department of Pathology, Hospital de Tortosa Verge de la Cinta, Institut Català de la Salut, Tortosa, Spain; 3Department of Computer Engineering and Mathematics, Universitat Rovira i Virgili, Tarragona, Spain; 4BCN MedTech, Department of Information and Communications Technologies, Universitat Pompeu Fabra, Barcelona, Spain 11:30am - 11:45am
1.F: 5 Predicting post-traumatic stress disorder (PTSD) symptoms in women suffering from breast cancer using machine learning 1National Technical University of Athens, Athens, Greece; 2Helsinki University Hospital, Helsinki, Finland |
10:30am - 12:00pm | 1.G: Musculoskeletal System I Location: 01.005 Chair I: Filiz Ates Chair II: Animesh Ranjan |
|
10:30am - 10:45am
1.G: 1 Shear wave elastography for simulating tibialis anterior muscle forces in vivo Institute of Structural Mechanics and Dynamics in Aerospace Engineering, University of Stuttgart, Stuttgart, Germany 10:45am - 11:00am
1.G: 2 Muscle architecture and contractile properties of the human M. tibialis anterior 1University of Stuttgart, Department of Motion and Exercise Science, Allmandring 28, 70569 Stuttgart, Germany; 2University of Stuttgart, Department of Continuum Biomechanics and Mechanobiology, Pfaffenwaldring 5A, 70569 Stuttgart, Germany 11:00am - 11:15am
1.G: 3 Predicting passive and active triceps surae muscle forces by integrating magnetic resonance image-based 3D finite element modelling and ultrasound shear wave elastography 1University of Stuttgart, Germany; 2Auckland Bioengineering Institute, New Zealand 11:15am - 11:30am
1.G: 4 Patient-specific geometry and deformation for real-time visualization of musculoskeletal biomechanics via 3D ultrasound 1University of Stuttgart - Institute for Modelling and Simulation of Biomechanical Systems, Germany; 2Stuttgart Center of Simulation Science (SC SimTech) 11:30am - 11:45am
1.G: 5 An activation-driven musculoskeletal finite element model of the human shoulder 1Institute for Computational Mechanics, Technical University of Munich, Germany; 2Department of Orthopaedics and Sports Orthopaedics, University Hospital rechts der Isar, Technical University of Munich, Germany 11:45am - 12:00pm
1.G: 6 CANCELLED - Investigation of surrogate methods for an electrophysiological skeletal muscle model University of Stuttgart, Germany |
10:30am - 12:00pm | 1.H: Clinical Imaging Location: 07.017 Chair I: Justus Carl Marquetand Chair II: Alireza Sharifzadeh-Kermani |
|
10:30am - 11:00am
1.H: 1 CANCELLED - Digital twins for interventional procedures Siemens Healthineers AG, Germany 11:00am - 11:15am
1.H: 2 Exploring the effect of feto-placental vasculature and oxygenation on T2* MRI using mathematical modelling 1Dept. Mechanical Engineering, University College London, London, UK; 2Centre for Medical Image Computing and Dept. of Computer Science, University College London, London, UK; 3Cardiff University Brain Research Imaging Centre and School of Computer Science and Informatics, Cardiff University, Cardiff, UK; 4Centre for the Developing Brain and Biomedical Engineering Department, School of Biomedical Engineering and Imaging Sciences, King’s College London, London, UK; 5Smart Imaging Lab, Radiological Institute, University Hospital Erlangen, Erlangen, Germany; 6Department of Women and Children's Health, School of Life Course Sciences, King’s College London, London, UK 11:15am - 11:30am
1.H: 3 Advanced magnetic resonance imaging techniques offer a virtual tool for assessing physiological mechanisms of human muscular mechanics in vivo 1Institute of Biomedical Engineering, Boğaziçi University, İstanbul, Turkey; 2Health Science Faculty, Physiotherapy and Rehabilitation Department, Haliç University, İstanbul, Turkey; 3Biomedical Engineering Institute, Polytechique Montreal, Montreal, Quebec, Canada 11:30am - 11:45am
1.H: 4 Energy-based method for identifying misclassified kidney boundary segmentations using CT scans 1Electrical Engineering and Computer Science, Transilvania University, Brasov, Romania; 2Advanta, Siemens SRL, Brasov, Romania 11:45am - 12:00pm
1.H: 5 Modelling and dynamic imaging: A few examples for clinical applications Inria, France |
12:00pm - 1:00pm | Lunch break: Lunch break Location: Foyer I+II |
1:00pm - 2:30pm | 2.A: Heart Modelling - Surrogate Modelling Location: 05.019 Chair I: Jack Lee Chair II: Stephen Anthony Creamer |
|
1:00pm - 1:15pm
2.A: 1 CANCELLED - High-speed real heart simulations using a neural network finite element approach University of Texas at Austin, United States of America 1:15pm - 1:30pm
2.A: 2 Adaptive reduced-order models for cardiac simulations 1Max Planck Institute for Dynamics of Complex Technical Systems, 39106 Magdeburg, Germany; 2Institute for Structural Analysis, Technische Universität Dresden, 01062 Dresden, Germany 1:30pm - 1:45pm
2.A: 3 Surrogate modeling of finite deformation hyperelasticity of human myocardial tissue Technische Universität Dresden, Germany 1:45pm - 2:00pm
2.A: 4 Bridging computational efficiency, sex differences, and clinical accuracy: Surrogate modeling in cardiotoxicity assessment 1ELEM Biotech SL, Barcelona, Spain; 2Barcelona Supercomputing Center, Barcelona, Spain 2:00pm - 2:15pm
2.A: 5 Physiology-informed machine learning to guide heart failure diagnosis, prognosis, and treatment University of Michigan, United States of America 2:15pm - 2:30pm
2.A: 6 An experimental and modelling pipeline to develop metabolite-sensitive cardiac cross-bridge models 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Department of Physiology, University of Auckland, New Zealand; 3Department of Engineering Science and Biomedical Engineering, University of Auckland, New Zealand |
1:00pm - 2:30pm | 2.B: Hemodynamics Location: 02.017 Chair I: Alfons Hoekstra Chair II: Finneas Jacob Robson Catling |
|
1:00pm - 1:15pm
2.B: 1 Hemodynamics of an implanted pressure sensor in porcine and human pulmonary artery 1Deutsches Herzzentrum der Charité, Berlin, Germany; 2Biotronik, Berlin, Germany; 3Technische Universität Dresden, Germany; 4Kurt-Schwabe-Institut für Mess- und Sensortechnik Meinsberg e.V., Meinsberg, Germany 1:15pm - 1:30pm
2.B: 2 Turbulence modeling in aortic blood flow: Traditional models and perspectives on machine learning 1Weierstrass Institute for Applied Analysis and Stochastics, Germany; 2Freie Universität Berlin, Germany 1:30pm - 1:45pm
2.B: 3 Estimation of exercise-induced pressure drop across aortic coarctations: A comparison of in vitro measurements and FSI simulations 1Stanford University, USA; 2Stanford Cardiovascular Institute, USA; 3KTH Royal Institute of Technology, Sweden; 4VA Palo Alto Healthcare System, USA 1:45pm - 2:00pm
2.B: 4 Simulation of the hemodynamics of a patient-specific artery at the full-body scale University of Macau, Macau S.A.R. (China) 2:00pm - 2:15pm
2.B: 5 A detailed 1D model of the feto-placental hemodynamics to investigate hypertensive disorders of pregnancy 1Eindhoven University of Technology, Netherlands, The; 2Máxima Medical Centre, the Netherlands; 3INRIA, France; 4e/MTIC, the Netherlands 2:15pm - 2:30pm
2.B: 6 The impact of clot permeability on thrombus growth in different hemodynamic scenarios Computational Science Lab, Informatics Institute, University of Amsterdam, Amsterdam, Netherland |
1:00pm - 2:30pm | 2.C: COMBINE Location: 02.011 Chair I: Nicole Erika Radde |
|
1:00pm - 1:15pm
2.C: 1 The COmputational MOdelling in BIology NEtwork in 2024: Standards and services for the computational physiology community and beyond 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Heidelberg Institute for Theoretical Studies - HITS gGmbH, Heidelberg, Germany; 3School of Biological Sciences, University of Bristol, Bristol, UK; 4Advanced Research Computing Centre, University College London, UK; 5Faculty of Life Science, Institute for Biology, Institute for Theoretical Biology, Humboldt-University Berlin, Berlin, Germany; 6Department of Electrical, Computer, and Energy Engineering, University of Colorado Boulder, USA; 7Department of Computer and Information Science, University of Konstanz, Konstanz, Germany; 8Medical Informatics Laboratory, University Medicine Greifswald, Germany; 9Department of Neuroscience, Physiology and Pharmacology, University College London, UK 1:15pm - 1:30pm
2.C: 2 BayModTS: A FAIR Bayesian workflow to process variable and sparse time series data University of Stuttgart, Germany 1:30pm - 1:45pm
2.C: 3 The reproducibility and credibility of biomedical models University of Washington, United States of America 1:45pm - 2:00pm
2.C: 4 Reproducible digital twins for personalized liver function assessment Humboldt University Berlin, Germany 2:00pm - 2:15pm
2.C: 5 The role of standards in defining an ecosystem for virtual human twins (VHTs) Heidelberg Institute for Theoretical Studies (HITS), Heidelberg, Germany 2:15pm - 2:30pm
2.C: 6 Model reuse - Lessons learned from 20 years of sharing CellML models University of Auckland, New Zealand |
1:00pm - 2:30pm | 2.E: Gastrointestinal Tract, Kidney & Uterus Location: 09.019 Chair I: Leo Cheng |
|
1:00pm - 1:15pm
2.E: 1 Modelling the electrophysiology of the non-pregnant uterus: From interconnected cells to organ University of Auckland, New Zealand 1:15pm - 1:30pm
2.E: 2 Computational modeling of the effect of laser tissue soldering on colonic motility 1IMT School for Advanced Studies Lucca, Italy; 2Hospital of Saint Luca, Italy; 3Università Campus Bio-Medico di Roma, Italy 1:30pm - 1:45pm
2.E: 3 Neural stimulation modifies the organ-scale coordination of rat gastric slow waves University of Auckland, New Zealand 1:45pm - 2:00pm
2.E: 4 Computational modelling of the human gastric peristalsis 1Institute for Continuum and Material Mechanics, Hamburg University of Technology, Germany; 2Institute for Mathematics and Computer-Based Simulation, University of the Bundeswehr Munich, Germany; 3Department of Engineering, Campus Bio-Medico University of Rome, Italy; 4Institute of Material Systems Modeling, Helmholtz-Zentrum Hereon, Germany 2:00pm - 2:15pm
2.E: 5 Exploring host-microbiota interactions through mechanistic modelling: Insights into diet impact on beneficial symbiosis resilience in the human gut 1Université Paris-Saclay, INRAE, MaIAGE, Jouy-en-Josas, 78350, France; 2Université Paris-Saclay, INRIA, MUSCA, Palaiseau, 91120, France; 3Université Paris-Saclay, INRIA, SIMBIOTX, Palaiseau, 91120, France; 4Micalis Institute, INRAE, AgroParisTech, University Paris-Saclay, Jouy-en-Josas, 78350, France; 5Université Paris-Saclay, MGP, INRAE, Jouy-en-Josas, 78350, France 2:15pm - 2:30pm
2.E: 6 Predictive modelling of renal circulation hemodynamic outcomes in hypertensive and diabetic kidney disease 1INSIGNEO Institute for in silico medicine, The University of Sheffield, UK; 2Department of Mechanical Engineering, The University of Sheffield, UK; 3School of Medicine and Population Health, The University of Sheffield, UK |
1:00pm - 2:30pm | 2.F: Big Data / Machine Learning II Location: 02.005 Chair I: Federica Caforio |
|
1:00pm - 1:15pm
2.F: 1 Virtual anatomical diagnosis of veridical human stroke patients 1DHSU, United States of America; 2Kings County Hospital, USA; 3Yale University, USA; 4Lincoln Medical Center, USA 1:15pm - 1:30pm
2.F: 2 Interpretable and generalizable mortality prediction in critical care settings: Integrating mechanistic knowledge with machine learning University Hospital RWTH Aachen, Germany 1:30pm - 1:45pm
2.F: 3 Explainable machine learning explained in medicine Codete Global, Poland 1:45pm - 2:00pm
2.F: 4 A deep learning approach to discriminate sodium and chloride muscle channelopathies 1University of Stuttgart, Germany; 2University of Tuebingen, Germany; 3VA Palo Alto Health Care System, CA, USA 2:00pm - 2:15pm
2.F: 5 Hybridising standard reduced-order modelling methods with interpretable sparse neural networks for real-time patient specific lung simulations 1Laboratoire de Mécanique des Solides, École Polytechnique/ CNRS/IPP, France; 2INRIA, France |
1:00pm - 2:30pm | 2.G: Musculoskeletal System II Location: 01.005 Chair I: Thomas Klotz |
|
1:00pm - 1:15pm
2.G: 1 Uncovering motor-unit activity in magnetomyography 1Department of Neural Dynamics and Magnetoencephalography, Hertie Institute for Clinical Brain Research, University of Tübingen, Germany; 2Centre for Integrative Neuroscience, University of Tübingen, Germany; 3MEG Center, University of Tübingen, Germany; 4Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart, Stuttgart, Germany 1:15pm - 1:30pm
2.G: 2 How distance affects the magnetic muscle signal - An in-vivo and in-silico study University of Tuebingen, Germany 1:30pm - 1:45pm
2.G: 3 Clinical possibilities 1Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart, Stuttgart, Germany, Germany; 2Department of Neural Dynamics and Magnetoencephalography, Hertie-Institute for Clinical Brain Research, University of Tübingen, Tübingen, Germany; 3MEG-Center, University of Tübingen, Tübingen, Germany 1:45pm - 2:00pm
2.G: 4 Impact of endomysium on fiber bundle passive and active mechanics for intact and chemically skinned fibers 1Institute of Structural Mechanics and Dynamics in Aerospace Engineering, University of Stuttgart, Germany; 2Motion and Exercise Science, University of Stuttgart, Germany; 3Stuttgart Center for Simulation Science, University of Stuttgart, Germany 2:00pm - 2:15pm
2.G: 5 Exploring the variability in neuromotor control to perform common locomotor tasks Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna, Italy 2:15pm - 2:30pm
2.G: 6 Multi-scale modeling approach to determine phrenic nerve activation threshold 1Institute of Biomedical Engineering and Informatics, Technische Universität Ilmenau, Ilmenau, Germany; 2neuroConn GmbH, Ilmenau, Germany |
1:00pm - 2:30pm | 2.H: Computational Knee Biomechanics: Domain-Specific M&S Resources and Translation Location: 07.017 Chair I: Ahmet Erdemir |
|
1:00pm - 1:30pm
2.H: 1 Open Knee(s): Computational Knee Biomechanics Resource Growth and Utilization Computational Biomodeling (CoBi) Core and Department of Biomedical Engineering, Lerner Research Institute, Cleveland Clinic 1:30pm - 1:45pm
2.H: 2 KNEEHUB: Implementation of the Delphi method to achieve consensus in the modeling and simulation processes and credibility activities in the knee 1Washington State University, United States of America; 2Cleveland Clinic, United States of America; 3University of Denver, United States of America; 4University of Auckland, New Zealand; 5Hospital for Special Surgery, United States of America 1:45pm - 2:00pm
2.H: 3 Toward an accurate digital twin: In vivo model calibration Mechanical and Materials Engineering, University of Denver, United States of America 2:00pm - 2:15pm
2.H: 4 Multi-scale modeling for in silico prediction of patient-specific risk of cartilage degeneration: Insights from a prospective follow-up study in patients with knee OA KU Leuven, Belgium 2:15pm - 2:30pm
2.H: 5 Distinct knee pathomechanics of females compared to males: A population-based in-silico analysis 1Sports Medicine Institute, Hospital for Special Surgery; 2Larner College of Medicine, University of Vermont; 3Biomechanics Department, Hospital for Special Surgery |
1:00pm - 2:30pm | 2.I: Cancer Modelling I Location: 01.003 Chair I: Marilisa Cortesi Chair II: Mehran Akbarpour Ghazani |
|
1:00pm - 1:15pm
2.I: 1 Digital twins for oncology and patient-specific simulations: Importance of vascularization Department of Mechanical Engineering, Aragon Institute for Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain 1:15pm - 1:30pm
2.I: 2 Digital twin of prostate cancer tumour growth: A multiphysics approach Universidad de Zaragoza, Spain 1:30pm - 1:45pm
2.I: 3 Multiphasic modelling and patient-specific simulation of tumours in soft tissue with OncoFEM 1Institute of Structural Mechanics and Dynamics, in Aerospace Engineering, University of Stuttgart, Germany; 2Institute of Applied Mechanics (CE), University of Stuttgart, Germany 1:45pm - 2:00pm
2.I: 4 Modeling hypoxia-induced radiation resistance and the impact of radiation sources 1Data Science Unit, Fondazione IRCCS Istituto Nazionale dei Tumori, Italy; 2MOX, Department of Mathematics, Politecnico di Milano, Italy 2:00pm - 2:15pm
2.I: 5 Efficient radial-shell model for 3D tumor spheroid dynamics with radiotherapy 1Faculty of Informatics/Mathematics, HTW Dresden - University of Applied Sciences (HTWD), Germany; 2OncoRay - National Center for Radiation Research in Oncology, Technische Universität Dresden; 3Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiooncology—OncoRay, Germany; 4Faculty of Mathematics and Computer Science, TU Freiberg, Germany; 5Center for Systems Biology Dresden (CSBD), Germany; 6National Center for Tumor Diseases (NCT), Partner Site Dresden, Germany |
2:30pm - 3:30pm | P1: Poster Session 1 Location: Foyer II (In front of auditoriums) |
|
P1: 1
Virtual tissue constructs to assess the potential of electrical impedance spectroscopy as a method for tissue identification and pathology diagnosis 1Department of Computer Science, University of Sheffield, United Kingdom; 2Insigneo Institute of in silico Medicine, University of Sheffield, United Kingdom; 3Liverpool Head and Neck Centre, Molecular and Clinical Cancer Medicine, University of Liverpool P1: 2
Can riot-control water cannon be lethal? 1Beijing Institute of Technology, 100081, Beijing, China; 2Department of Biomechanics and Accident Research, Ludwig-Maximilians-University Munich, Munich, Germany.; 3Faculty of Mechanical Engineering, Technion - Israel Institute of Technology, 32000 Haifa, Israel P1: 3
In silico modelling of the effect of vaping on pulmonary surfactant dynamics from alveolus to whole lung Auckland Bioengineering Institute, University of Auckland, New Zealand P1: 4
How does utero-placental vascular structure drive Doppler ultrasound? 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Department of Obstetrics and Gynaecology, Faculty of Medical and Health Sciences, University of Auckland, New Zealand P1: 5
Exploring the interaction between electrical stimulation and cells by an image-based digital twin 1University of Rostock, Germany; 2Rostock University Medical Center; 3University of Pavia P1: 6
Using sequential nephron segment simulation to understand mechanisms of diuretic resistance 1Department of Physiology, University of Mississippi Medical Center, United States of America; 2Department of Medicine, University of Mississippi Medical Center, United States of America P1: 7
Agent-based simulation of diffusion-MRI for the characterization of NASH Group SIMBIOTX, INRIA Saclay, 91120 Palaiseau, France P1: 8
Role of conduction channels in ventricular arrhythmias: Insights from in silico simulation and clinical data 1Centro de Investigación e Innovación en Bioingeniería, Universitat Politècnica de València, Valencia, Spain; 2Valencian International University, Valencia, Spain; 3Arrhythmia Department, Heart Institute, Teknon Medical Center, Barcelona, Spain P1: 9
Electrical power and energy distributions in AF activation could direct to areas of rotor stabilization 1Universitat Politècnica de València, Valencia, Spain; 2Universidad Rey Juan Carlos, Madrid, Spain; 3University of Michigan, Ann Abor, Michigan, USA P1: 10
Inform design of a pulmonary artery pressure sensor using virtual cohorts 1Institute of Computer-assisted Cardiovascular Medicine, Charité – Universitätsmedizin Berlin; 2Deutsches Herzzentrum der Charité; 3Biotronik SE & Co. KG; 4Technische Universität Dresden, Germany; 5Kurt-Schwabe-Institut für Mess- und Sensortechnik Meinsberg e.V., Meinsberg, Germany P1: 11
Modelling sodium transport in kidney tubuloids 1Maastricht University, the Netherlands; 2UMC Utrecht, the Netherlands; 3University of Waterloo, Canada P1: 12
Utilising self-similarity to model the morphometry of the pulmonary arteries 1University Of Auckland, Bioengineering Institute, New Zealand; 2Brigham and Women’s Hospital (BWH) and Harvard Medical School (HMS) P1: 13
3D model of the iliac vein unification – Sensitivity analysis 1Sano Centre for Computational Medicine, Poland; 2Division of Clinical Medicine, University of Sheffield, United Kingdom; 3Insigneo Institute for in silico medicine, University of Sheffield, United Kingdom; 4Royal Free London NHS Foundation Trust, United Kingdom; 5Institute of Computer Science, AGH University of Science and Technology, Kraków, Poland; 6University College London, London, UK P1: 14
Evaluating the flow convergence method in mitral regurgitation analysis: Insights from computational fluid dynamics and pulsatile in-vitro studies 1Institute of Fluid Mechanics (ISTM), Karlsruhe Institute of Technology (KIT), Germany; 2Department of Cardiac Surgery, Heidelberg University Hospital, Heidelberg, Germany.; 3Department of Internal Medicine III, Heidelberg University Hospital, Heidelberg, Germany; 4Department of Anaesthesiology, Heidelberg University Hospital, Heidelberg, Germany P1: 15
In-silico design of wearable- and model-driven digital twins for cardiovascular disease monitoring University of Trento, Italy P1: 16
Parameter estimation from undersampled MRI in frequency space University of Groningen, Netherlands, The P1: 17
Computational study of the assessment of atria vulnerability to mutation-induced AF in 3D human atria 1Universitat Politecnica de Valencia, Spain; 2Hospital Universitari i Politecnic La Fe, Valencia, Spain P1: 18
Mapping persistent atrial fibrillation dynamics: Insights from electro-optic flow analysis in a virtual patient population Queen Mary University of London, United Kingdom P1: 20
Integrating care: Abalietas as a bridge between clinical quality registers and electronic medical records for enhanced machine learning applications in healthcare Sano – Centre for Computational Personalised Medicine International Research Foundation, Poland P1: 21
PyPopSim: Form single simulation to population studies Université de Technologie de Compiègne, Alliance Sorbonne Universités, CNRS, UMR 7338 Biomécanique et Bio-ingénierie, Centre de recherche Royallieu, CS 60 319 Compiègne, France P1: 23
Towards international standardization of computational modeling and simulation in the field of medical devices Fraunhofer IMTE, Germany P1: 24
A physiologically based digital twin for alcohol consumption – Predicting real-life drinking responses and long-term plasma PEth 1Linköping University, Sweden; 2Örebro University, Sweden P1: 25
Hipathia and metabolizer: Unveiling disease mechanisms and enabling personalized medicine Andalusian Platform for Computational Medicine, Spain P1: 26
In silico modeling of cell migration over texturally treated curved surfaces 1Biomechanics Research Unit, GIGA In Silico Medicine, University of Liège, Belgium; 2Prometheus, division of Skeletal Tissue Engineering , KU Leuven, Belgium; 3Biomechanics Section, KU Leuven, Belgium; 4Skeletal Biology & Engineering Research Center, KU Leuven, Belgium P1: 27
Systematic understanding and categorization of modeling & simulation context of use in knee biomechanics Cleveland Clinic, United States of America P1: 28
Sensitivity analysis of a finite element model predicting the fixation stability of tibial plateau fractures 1Institute for Biomechanics, ETH Zürich, Switzerland; 2CustomSurg AG, Switzerland; 3Brigham and Women's Hospital, Harvard Medical School, Boston, USA; 4Bispebjerg Hospital, Copenhagen, Denmark P1: 29
Designing a single-use novel surgical kit for a cervical facet cage implantation through iterative FE simulations 1Department of Chemistry, Materials and Chemical Engineering “Giulio Natta” - LaBS, Politecnico di Milano (Italy); 2IRCCS Istituto Ortopedico Galeazzi (Italy) P1: 30
3D optical scanning toward personalised whole-body models 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Department of Engineering Science, University of Auckland, New Zealand P1: 31
A machine learning-based in silico assessment to predict human respiratory irritants and toxicity Kumoh National Institue of Technology, Korea, Republic of (South Korea) P1: 32
Unsupervised learning for MRI cross-scanner harmonization 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Mātai Medical Research Institute, Gisborne, New Zealand; 3Department of Anatomy and Medical Imaging, Faculty of Medical and Health Sciences, University of Auckland, New Zealand; 4Centre for Brain Research, University of Auckland, New Zealand |
3:30pm - 5:00pm | 3.A: Cardiovascular Digital Twins Location: 05.019 Chair I: Michèle Barbier Chair II: Robyn Walker May |
|
3:30pm - 3:45pm
3.A: 1 Towards a realistic digital twins of coronary artery disease: Is a fluid-structure interaction simulations necessary? Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, Italy 3:45pm - 4:00pm
3.A: 2 New perspectives on global sensitivity analysis for the creation of cardiovascular digital twins 1Materials & Engineering Research Institute, Sheffield Hallam University, Sheffield, United Kingdom; 2Department of Computer Science, University of Sheffield, Sheffield; 3Department of Engineering and Mathematics Sheffield Hallam University Sheffield, S1 1WB; 4Department of Infection, Immunity and Cardiovascular Disease, University of Sheffield, Sheffield, United Kingdom 4:00pm - 4:15pm
3.A: 3 Digital-twin based assessment of atrial arrhythmias: Influence of anatomical and functional personalization strategies 1Institute of Biomedical Engineering, Karlsruhe Institute of Technology (KIT); 2Institute of Information and Communication Technologies (ITACA), Universitat Politècnica de València (UPV), Valencia, Spain; 3Department of Computer Science, University of Oxford, Oxford, United Kingdom; 4Department of Cardiology, University Hospital Heidelberg, Heidelberg Germany; 5Städtisches Klinikum Karlsruhe, Karlsruhe, Germany; 6Universitätsklinikum Freiburg, Freiburg, Germany 4:15pm - 4:30pm
3.A: 4 Advancements in multiphysics and multiscale modeling: Connecting computational cardiology with digital twinning MOX-Mathematics Department, Politecnico di Milano, Italy 4:30pm - 4:45pm
3.A: 5 Next generation cardiac care: SimCardioTest cloud-based platform 1InSilicoTrials Technologies, Italy; 2Universite de Bordeaux, Bordeaux, France; 3Universidad Pompeu Fabra, Barcelona, Spain; 4Universitat Politecnica de Valencia, Valencia, Spain; 5Simula Research Laboratory, Oslo, Norway; 6Institut National De Recherche En informatique et Automatique, Sophia Antipolis, France; 7Microport CRM, Clamart, France.; 8VPH Institute, Leuven, Belgium; 9Exact Cure, Nice, France 4:45pm - 5:00pm
3.A: 6 Uncertainty estimation in patient-specific cardiovascular models: The effect of sources of errors in 4D flow MRI and blood pressure 1Department of Biomedical Engineering, Linköping University, Linköping, Sweden; 2Center for Medical Image Science and Visualization (CMIV), Linköping University, Linköping, Sweden; 3Department of Health, Medicine and Caring Sciences, Linköping University, Linköping, Sweden |
3:30pm - 5:00pm | 3.B: Vascular (Re)Modelling Location: 02.017 Chair I: Reza Abdollahi |
|
3:30pm - 3:45pm
3.B: 1 Branching exponents of synthetic vascular trees under different optimality principles 1Technical University of Darmstadt, Germany; 2Leibniz University Hannover, Germany; 3Ghent University, Belgium 3:45pm - 4:00pm
3.B: 2 Generation of organ-scale synthetic vasculature using mathematical optimization 1TU Darmstadt, Germany; 2Leibniz University Hannover, Germany 4:00pm - 4:15pm
3.B: 3 Modelling growth, remodelling and damage of arterial tissue: Application to cerebral vasospasm 1Computational Science Lab, Informatics Institute, University of Amsterdam, Netherlands; 2Department of Mechanical Engineering and Materials Science, University of Pittsburgh, USA; 3Department of Computer Science, University of Sheffield, UK; 4INSIGNEO Institute for in silico Medicine, University of Sheffield, UK 4:15pm - 4:30pm
3.B: 4 Computational modelling of coupled shear-induced NO signalling pathways in endothelial and smooth muscle cells of arterial walls University of Auckland, New Zealand 4:30pm - 4:45pm
3.B: 5 Do the clot mechanical properties affect the thrombectomy procedures? An in silico study 1Department of Chemistry, Materials and Chemical Engineering ‘Giulio Natta’, Politecnico di Milano, Italy; 2Department of Biomechanical Engineering, Delft University of Technology, Delft, The Netherlands; 3Department of Biomedical Engineering, Erasmus MC, Rotterdam, The Netherlands |
3:30pm - 5:00pm | 3.C: M&S Resources, Infrastructure, and Operationalization Location: 07.017 Chair I: Thor Franciscus Besier |
|
3:30pm - 3:45pm
3.C: 1 Harmonising historic clinical gait datasets using image-based musculoskeletal models 1University of Auckland, Auckland, New Zealand; 2Royal Childrens Hospital, Melbourne, Australia; 3University of New South Wales, Sydney, Australia; 4Griffith University, Brisbane, Australia 3:45pm - 4:00pm
3.C: 2 An in silico world: Resources to accelerate the adoption of in silico trials 1Alma Mater Studiorum - University of Bologna, Italy; 2Computational Science Lab – University of Amsterdam, the Netherlands; 3Technical University of Eindhoven, Department of Biomedical Engineering, Netherlands; 4Department of Drug and Health Sciences, University of Catania, Italy; 5University of Liège, KU Leuven, VPH institute, Belgium; 6Sano Centre for Computational Medicine: Krakow, Poland; 7KU Leuven – Mechanical Engineering Department, Biomechanics section, Belgium; 8InSilicoTrials Technologies SpA, Trieste, Italy; 9KU Leuven Centre for IT & IP Law – imec 4:00pm - 4:15pm
3.C: 3 Computer modelling and simulation in clinics: Longitudinal mapping of usage and clinician’s trust in in silico medicine 1Virtual Physiological Human Institute (VPHi), Belgium; 2Centre for Sociological Research, KU Leuven, Belgium; 3Institute of Cardiovascular Science, University College London, London, UK; 4GIGA Research Institute, University of Liège, Belgium; 5Division of Biomechanics, KU Leuven, Belgium 4:15pm - 4:30pm
3.C: 4 Energy-based multiscale modelling and system analysis framework Auckland Bioengineering Institute, University of Auckland, New Zealand 4:30pm - 4:45pm
3.C: 5 Different magic sauce, but same taste? Exploring the social and legal demarcation frictions between artificial intelligence and digital twins in healthcare 1Life Sciences and Society Lab, KU Leuven, Belgium; 2Center for IT & IP Law (CiTiP), KU Leuven, Belgium |
3:30pm - 5:00pm | 3.D: Aortic Valve Replacements Location: 09.019 Chair I: Leonid Goubergrits |
|
3:30pm - 3:45pm
3.D: 1 Patient-specific TAVI thrombosis modelling: Insights from haemodynamic analysis King's College of London, United Kingdom 3:45pm - 4:00pm
3.D: 2 Unveiling the relation between aortic shape and calcification in population with aortic stenosis: Towards better management of TAVI patients 1Institute of Cardiovascular Science, University College London, London, UK; 2Bart’s Heart Centre, St Bartholomew’s Hospital, London, UK 4:00pm - 4:15pm
3.D: 3 Identify transcatheter aortic valve implantation degeneration using computational hemodynamic scores 1Politecnico di Milano, Milan, Italy; 2Centro Cardiologico Monzino IRCSS, Milan, Italy; 3Università degli Studi di Milano, Milan, Italy 4:15pm - 4:30pm
3.D: 4 Predicting transcatheter aortic valve implantation procedural outcomes through the development and validation of patient-specific simulations 1Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, Milan, Italy; 2Department of Biomedical Sciences, Humanitas University, Milan, Italy; 3Humanitas Research Hospital, Milan, Italy 4:30pm - 4:45pm
3.D: 5 Virtual cohort generation for in silico trials of transcatheter aortic valve implantation 1Eindhoven University of Technology, Netherlands, The; 2ANSYS, The Netherlands 4:45pm - 5:00pm
3.D: 6 Simulation workflow for transcatheter aortic valve replacements: From crimp and deployment to fluid-structure interaction 1DYNAmore, An Ansys Company, Germany; 2Ansys, Inc. |
3:30pm - 5:00pm | 3.E: Dental Biomechanics Location: 09.003 Chair I: David Ackland Chair II: Omkar Nitin Athavale |
|
3:30pm - 4:00pm
3.E: 1 Muscle and joint mechanics during maximum-force biting following total temporomandibular joint replacement surgery University of Melbourne, Australia 4:00pm - 4:15pm
3.E: 2 Morphological and functional aspects in oral rehabilitations – New algorithmic approaches in the era of digital dentistry Centre for Dental Medicine, University of Zurich, Switzerland 4:15pm - 4:30pm
3.E: 3 Modeling the spatio-temporal evolution of bone-implant interface stiffness via a stochastic numerical approach 1Beijing Institute of Technology, 100081 Beijing, PR China.; 2Department of Biomaterials, Sahlgrenska Academy, University of Gothenburg, Göteborg, Sweden; 3Faculty of Mechanical Engineering, Technion - Israel Institute of Technology, 32000 Haifa, Israel; 4The Maurice and Gabriela Goldschleger School of Dental Medicine, Department of Oral Biology, Tel Aviv University, Tel Aviv, Israel 4:30pm - 4:45pm
3.E: 4 Influence of bone quality and dental implant material on stress distribution within the surrounding bone 1Department of Orthopaedics, Rostock University Medical Center, Rostock, Germany; 2Department of Oral, Maxillofacial and Plastic Surgery, Rostock University Medical Center, Rostock, Germany |
3:30pm - 5:00pm | 3.F: Big Data / Machine Learning III Location: 02.005 Chair I: Alina Roitberg |
|
3:30pm - 3:45pm
3.F: 1 A computational pipeline for fast surrogates of left atrial appendage occlusion fluid simulations 1Physense, BCN Medtech, Department of Information and Communication Technologies, Universitat Pompeu Fabra, Barcelona, Spain; 2IHU Liryc, CHU Bordeaux, Univ. Bordeaux, Bordeaux, France; 3Inria Centre, Université Côte d'Azur, Epione team, Sophia Antipolis, Valbonne, France 3:45pm - 4:00pm
3.F: 2 Generative 3D cardiac shape modelling for in-silico trials 1Advanta, Siemens SRL, Brașov, Romania; 2Faculty of Mathematics and Computer Science, Babeș-Bolyai University, Cluj-Napoca, Romania 4:00pm - 4:15pm
3.F: 3 Image segmentation of irradiated tumor spheroids by fully convolutional networks 1OncoRay—National Center for Radiation Research in Oncology, Faculty of Medicine and University Hospital Carl Gustav Carus, Technische Universität Dresden, Helmholtz-Zentrum Dresden—Rossendorf, Germany; 2DataMedAssist Group, HTW Dresden—University of Applied Sciences, 01069 Dresden, Germany; 3Faculty of Informatics/Mathematics, HTW Dresden—University of Applied Sciences, 01069 Dresden, Germany; 4Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiooncology—OncoRay, 01328 Dresden, Germany; 5National Center for Tumor Diseases (NCT), Partner Site Dresden, 69120 Heidelberg, Germany 4:15pm - 4:30pm
3.F: 4 Accelerating osteoarthritis progression predictions: A machine learning and finite element analysis approach 1School of Mechanical Engineering, College of Engineering , University of Tehran, Iran; 2Department of Human Movement Sciences, KU Leuven, Belgium; 3Mechanical Engineering Department, KU Leuven, Belgium 4:30pm - 4:45pm
3.F: 5 Enhancing synthetic medical image fidelity through semantic segmentation guidance in diffusion models 1Department of Medical Physics in Radiation Oncology, German Cancer Research Center (DKFZ), Im Neuenheimer Feld 280, Heidelberg, Germany; 2Heidelberg Institute of Radiation Oncology (HIRO) & National Center for Radiation Research in Oncology (NCRO), Heidelberg/Dresden, Germany; 3Karlsruhe Institute of Technology (KIT), Scientific Computing Center, Hermann-von-Helmholtz-Platz 1; 4Heidelberg Ion Beam Therapy Center (HIT), Heidelberg, Germany; 5Klinik fur Strahlentherapie und Radioonkologie, Universitätsklinikum, Mannheim, Germany 4:45pm - 5:00pm
3.F: 6 Towards multi-scale model selection for rare data applications 1Institute for Partial Differential Equations, TU Braunschweig, Germany; 2Department of Visceral, Transplant, Thoracic and Vascular Surgery, University of Leipzig Medical Center, Germany |
3:30pm - 5:00pm | 3.G: Musculoskeletal System - Hard Tissue Location: 01.005 Chair I: Geoffrey Handsfield |
|
3:30pm - 3:45pm
3.G: 1 Improving proximal humerus fracture fixations - Insights from in silico analyses AO Research Institute Davos, Switzerland 3:45pm - 4:00pm
3.G: 2 Predicting lower limb bone geometry in a paediatric population using statistical shape modelling 1Auckland Bioengineering Institute, The University of Auckland, New Zealand; 2Engineering Science, The University of Auckland, New Zealand 4:00pm - 4:15pm
3.G: 3 Automated pose estimation of knee kinematics from fluoroscopy using a differentiable renderer ETH Zurich, Switzerland 4:15pm - 4:30pm
3.G: 4 Numerical evaluation of the postoperative primary fixation stability in complex tibial plateau fractures 1Institute for Biomechanics, ETH Zürich, Switzerland; 2CustomSurg AG, Switzerland; 3Brigham and Women's Hospital, Harvard Medical School, Boston, USA; 4Bispebjerg Hospital, Copenhagen, Denmark; 5Klinik für Unfallchirurgie und Orthopaedie, Berufsgenossenschaftliche Unfallklinik Ludwigshafen, Germany 4:30pm - 4:45pm
3.G: 5 Planning the perfect osteosynthesis: Simulation-assisted decision making in fracture treatment OSORA medical GmbH, Germany 4:45pm - 5:00pm
3.G: 6 Minding the gap: Sex differences influence bone fracture healing 1Biomechanics section, Department of Mechanical engineering, KU Leuven, Belgium; 2Prometheus: Division of Skeletal Tissue Engineering, KU Leuven, Belgium; 3Department cBITE, MERLN Institute, Maastricht University, The Netherlands; 4Biomechanics research unit, GIGA in silico medicine, University of Liège, Belgium |
3:30pm - 5:00pm | 3.H: Neural Engineering Location: 02.011 Chair I: Madeleine M. Lowery Chair II: Laureen Wegert |
|
3:30pm - 4:00pm
3.H: 1 Computational modelling of closed-loop control of deep brain stimulation for Parkinson’s disease University College Dublin, Ireland 4:00pm - 4:15pm
3.H: 2 Group analysis in deep brain stimulation employing simulations of the volume of tissue activated 1Institut for Medical Engineering and Medical Informatics, University of Applied Sciences and Arts Northwestern Switzerland, Switzerland; 2Department of Biomedical Engineering, Linköping University, Sweden 4:15pm - 4:30pm
3.H: 3 Computational modeling of transcranial magnetic stimulation 1Max Planck Institut für Kognitions- und Neurowissenschaften, Germany; 2Danish Technical University, Copenhagen, Denmark; 3Czech Academy of Sciences, Prague, Czech Republic; 4Hochschule für Technik, Wissenschaft und Kunst, Leipzig, Germany; 5Technische Universität Ilmenau, Ilmenau, Germany 4:30pm - 4:45pm
3.H: 4 Simulation-enhanced magnetomyographic quantum sensor systems to study neuromuscular control 1University of Stuttgart, Germany; 2University of Brescia, Italy; 3University of Tübingen, Germany 4:45pm - 5:00pm
3.H: 5 Influence of collateral axon parameters on threshold activation during DBS 1Institute of General Electrical Engineering, University of Rostock, Germany; 2Ageing of Individuals and Society, Interdisciplinary Faculty, University of Rostock, Germany; 3Life, Light and Matter, Interdisciplinary Faculty, University of Rostock, Germany |
3:30pm - 5:00pm | 3.I: Cancer Modelling II Location: 01.003 Chair I: Roberto Benzo |
|
3:30pm - 3:45pm
3.I: 1 Computational synthesis of microvascular networks: A precision medicine approach to predict radiotherapy outcome in head and neck cancer 1Data Science Unit, Fondazione IRCCS Istituto Nazionale dei Tumori, Italy; 2Department of Mathematics, Politecnico di Milano, Milan, Italy 3:45pm - 4:00pm
3.I: 2 Development and validation of a computational simulator for treatment outcome prediction in high-grade serous ovarian cancer 1University of Bologna, Italy; 2University of New South Wales 4:00pm - 4:15pm
3.I: 3 Patient-specific modelling of needle insertion in prostate cancer therapy 1University of Cyprus, Cyprus; 2University College London, UK 4:15pm - 4:30pm
3.I: 4 METASTRA: Computer-aided effective fracture risk stratification of patients with vertebral metastases for personalised treatment through robust computational models validated in clinical settings 1Alma Mater Studiorum - University of Bologna, Italy; 2Rizzoli Orthopaedic Institute, Italy; 3InSilicoTrials Technologies, Italy; 4University of Sheffield, UK; 5Federal Institute of Technology ETH Zurich, Switzerland; 6FrontEndArt, Hungary; 7University of Zaragoza, Spain; 8AOSpine, Switzerland; 9Eurice, Germany; 10Buda Health Center, Hungary; 11Rise, Croatia; 12Charité Universitätsmedizin Berlin, Germany; 13University Medical Center Utrecht, Netherlands; 14University of Szeged, Hungary; 15Voisin Consulting Life Science, France 4:30pm - 4:45pm
3.I: 5 Clinical decision support during maintenance therapy for childhood acute lymphoblastic leukemia 1MathOpt group, Otto von Guericke University Magdeburg; 2Department of Pediatrics and Adolescent Medicine, University Hospital Erlangen |
5:05pm - 6:00pm | Towards Digital Twins in Healthcare for the Cerebrovascular System, applied to Acute Ischemic Stroke Alfons Hoekstra University of Amsterdam, Netherlands Location: -2.033 (Big auditorium) |
|
[Single Presentation of ID 480]: 1
|
6:00pm - 10:00pm | Reception: Welcome Reception Location: Foyer II (In front of auditoriums) |
Date: Thursday, 05/Sept/2024 | |
8:30am - 9:00am | Registration II: Registration Location: Foyer I (Entry area) |
9:00am - 9:55am | Personalised Modelling of the Pharynx: Integrating Physiology, Imaging, and Computational Models to Understand Pharyngeal Function in Healthy Humans and People with Obstructive Sleep Apnoea Lynne E. Bilston University of New South Wales, Sydney, Australia Location: -2.033 (Big auditorium) |
|
[Single Presentation of ID 481]: 1
|
10:00am - 10:30am | Coffee break III: Coffee break Location: Foyer II (In front of auditoriums) |
10:30am - 12:00pm | 4.A: Heart Modelling - Applications I Location: 05.019 Chair I: Daniel Beard |
|
10:30am - 11:00am
4.A: 1 Computational modeling of desmoplakin cardiomyopathy University of Michigan, United States of America 11:00am - 11:15am
4.A: 2 Determination of stimulation threshold in a 3D model of a pacemaker 1Université de Bordeaux / IHU Liryc / Inria, France; 2Microport CRM, France 11:15am - 11:30am
4.A: 3 Development of an automated pipeline for large-scale in silico trials in patient-specific electromechanical ventricular models 1Department of Computer Science, University of Oxford, United Kingdom; 2Department of Engineering Science, University of Oxford, United Kingdom 11:30am - 11:45am
4.A: 4 A strongly coupled electromechanical model of heart failure as a benchtest for proarrhythmia assessment and drug testing 1ELEM Biotech, Spain; 2Barcelona Supercomputing Center, Spain; 3Universitat Politècnica de València, Spain 11:45am - 12:00pm
4.A: 5 Personalisation of action potentials based on activation recovery intervals in post-infarcted pigs: A simulation study 1Centre Inria d'Université Côte d'Azur, France; 2IHU Liryc, Université de Bordeaux, France |
10:30am - 12:00pm | 4.B: Vascular CFD Modelling Location: 02.017 Chair I: Alfonso Caiazzo Chair II: Ning Wang |
|
10:30am - 10:45am
4.B: 1 CANCELLED - Efficient multiscale fluid flow modelling by a Stokes-enforcing boundary condition 1University of Groningen, The Netherlands; 2Pontificia Universidad Católica, Chile 10:45am - 11:00am
4.B: 2 An investigation into cerebral perfusion sensitivity under different haemodynamic and anatomical variations 1Auckland Bioengineering Institute, University of Auckland, Auckland, New Zealand; 2Department of Physiology, Translational Cardio-Respiratory Laboratory, School of Medical Sciences, Faculty of Medical and Health Sciences, University of Auckland, Auckland, New Zealand; 3Department of Engineering Science and Biomedical Engineering, University of Auckland, Auckland, New Zealand 11:00am - 11:15am
4.B: 3 Inverse modelling approach to identify model parameters in 0D pulmonary haemodynamic simulation models University College London, United Kingdom 11:15am - 11:30am
4.B: 4 Neural networks for efficient sensitivity analysis and parameter estimation of dynamical systems for blood and solute whole-body circulation Inria, Palaiseau, France 11:30am - 11:45am
4.B: 5 Comparison of 4D flow magnetic resonance imaging with blood flow simulations before and after left atrial appendage occlusion 1Pompeu Fabra University, Department of Information and Communications Technologies, Barcelona, Spain; 2Hospital Clínic, Universitat de Barcelona, Cardiovascular Institute, Barcelona, Spain 11:45am - 12:00pm
4.B: 6 Quantitative perfusion assessment: A mechanistic model to interpret dynamic imaging 1Inria Saclay, France; 2Leiden University Medical Center, The Netherlands; 3Inrae, France |
10:30am - 12:00pm | 4.C: M&S Reproducibility, Credibility, and Translation Location: 07.017 Chair I: Ahmet Erdemir |
|
10:30am - 10:45am
4.C: 1 A rubric for assessing conformance to the ten rules for credible practice of modeling and simulation in healthcare 1Department of Pathology and Genomic Medicine, Thomas Jefferson University, Philadelphia, PA, USA; 2Downstate Health Sciences University, Brooklyn, NY, USA; 3Kings County Hospital, Brooklyn, NY, USA; 4NASA - John H Glenn Research Center, Cleveland, OH, USA; 5Department of Biomedical Engineering, Lerner Research Institute, Cleveland Clinic, OH, USA; 6Ansys Inc. Evanston, IL, USA; 7Department of Biological & Agricultural Engineering, Louisiana State University, Baton Rouge, LA, USA; 8InSilico Labs LLC, Houston, TX USA; 9Department of Bioengineering, Stanford University, Stanford, CA, USA 10:45am - 11:00am
4.C: 2 The automated construction and verification of physically plausible models of physiological systems 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2School of Mathematics and Statistics, Faculty of Science, University of Melbourne, Australia 11:00am - 11:15am
4.C: 3 From clinical measurements to parameter personalisation: An end-to-end standardised framework to navigate computational physiology workflows 1Auckland Bioengineering Institute, University of Auckland, Auckland, New Zealand; 2Department of Engineering Science and Biomedical Engineering, University of Auckland, Auckland, New Zealand 11:15am - 11:30am
4.C: 4 Multiscale agent-based virtual-tissue models: Working towards reproducible and reusable models Indiana University, United States of America 11:30am - 11:45am
4.C: 5 Influence of dependent parameters on the predictive uncertainty of biomechanical models: Insights from global sensitivity analysis University of the Bundeswehr Munich, Germany 11:45am - 12:00pm
4.C: 6 KNEEHUB: A Resource for end-to-end modeling & simulation workflows in computational knee biomechanics 1Cleveland Clinic, United States of America; 2University of Denver, United States of America; 3University Auckland, New Zealand; 4Washington State University, United States of America; 5Hospital for Special Surgery, United States of America |
10:30am - 12:00pm | 4.D: Cellular & Systems Biology I Location: 02.005 Chair I: David Phillip Nickerson Chair II: Laura Lafuente-Gracia |
|
10:30am - 11:00am
4.D: 1 Use of bond graphs and scaffolds for modelling physiology University of Auckland, New Zealand 11:00am - 11:15am
4.D: 2 Using a systems biology approach to construct adverse outcome pathway networks aligned with the FAIR principles 1Biomechanics Research Unit, GIGA In Silico Medicine, University of Liège, Belgium; 2Luxembourg Centre for Systems Biomedicine, University of Luxembourg, Belvaux, Luxembourg; 3ELIXIR Luxembourg, Belvaux, Luxembourg; 4Vrije Universiteit Brussel, IVTD research group, Brussels, Belgium; 5IUF - Leibniz Research Institute for Environmental Medicine, Düsseldorf, Germany; 6Department of Diagnostics, Fraunhofer Institute for Cell Therapy and Immunology, Leipzig, Germany; 7Center for Scalable Data Analytics and Artificial Intelligence (ScaDS.AI), Dresden/Leipzig, Germany; 8Institute of Clinical Immunology, Medical Faculty, University Hospital, University of Leipzig, Leipzig, Germany; 9DNTOX, Düsseldorf, Germany; 10Swiss Centre for Applied Human Toxicology, Basel, Switzerland; 11Skeletal Biology and Engineering Research Center, KU Leuven, Belgium; 12Biomechanics Section, Department of Mechanical Engineering, KU Leuven, Belgium 11:15am - 11:30am
4.D: 3 Agent-based modelling of cell biomechanics using the open-source platform BioDynaMo 1University of Cyprus, Cyprus; 2University College London, UK; 3University of Surrey, UK 11:30am - 11:45am
4.D: 4 Metabolic digital twins of people with diabetes 1Eindhoven University of Technology, The Netherlands; 2Máxima MC, Department of Internal Medicine, Eindhoven, The Netherlands 11:45am - 12:00pm
4.D: 5 A computational analysis of coupled glycolytic, oxidative ATP synthesis, and energy and pH balance in contracting fast-twitch muscle fibres 1Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart, Germany; 2Department of Molecular and Integrative Physiology, University of Michigan, USA; 3Centre for Child Development and Exercise, Wilhelmina Children's Hospital, University Medical Centre Utrecht, the Netherlands; 4Biomedical MR Research Lab, Department of Nuclear Medicine and Radiology, Amsterdam University Medical Centre|site AMC, the Netherlands; 5Stuttgart Centre for Simulation Science (SC SimTech), University of Stuttgart, Germany |
10:30am - 12:00pm | 4.E: Lung Modelling I Location: 02.011 Chair I: Merryn Tawhai |
|
10:30am - 10:45am
4.E: 1 Multiscale modelling and estimation of lung poromechanics École Polytechnique, France 10:45am - 11:00am
4.E: 2 A coupled multi-dimensional multiphase porous media approach for modeling the respiratory and circulatory system of the human lungs including gas exchange Institute for Computational Mechanics, Technical University of Munich, Garching b. München, Germany 11:00am - 11:15am
4.E: 3 Personalised computational models of paediatric lung structure from novel lung MRI 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Mātai Medical Research Institute, Gisborne, New Zealand; 3GE Healthcare Australia-New Zealand; 4Faculty of Medical and Health Sciences, University of Auckland, New Zealand 11:15am - 11:30am
4.E: 4 A framework to characterize phenotype-specific models of the lung from CT imaging Auckland Bioengineering Institute, The University of Auckland, New Zealand 11:30am - 11:45am
4.E: 5 Identification of expiratory WOB in active expiration with imposed non-linear resistance University of Canterbury, New Zealand |
10:30am - 12:00pm | 4.F: High-Performance Computing Location: 09.019 Chair I: Oliver Röhrle |
|
10:30am - 10:45am
4.F: 1 HPC in Biomechanics - Challenges, Current Research and Future Opportunities High-Performance Computing Center Stuttgart, Germany 10:45am - 11:00am
4.F: 2 A user interface to facilitate visualization and integration of predictions for mechanical femur strength. 1Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna, Bologna, Italy.; 2Department of Electrical, Electronic and Information Engineering, University of Bologna, 40126 Bologna, Italy; 3Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Via di Barbiano 1/10, 40136, Bologna, Italy. 11:00am - 11:15am
4.F: 3 Enhancing large-scale cohort simulations through integrated HPC infrastructure and model execution environment 1Sano - Centre for Computational Personalized Medicine, Kraków, Poland; 2ACC Cyfronet AGH, Kraków, Poland; 3Department of Industrial Engineering, Alma Mater Studiorum, University of Bologna, Bologna, Italy 11:15am - 11:30am
4.F: 4 Code verification of contact analysis using a micro-finite-element solver 1Department of Mechanical Engineering, University of Sheffield, United Kingdom; 2Insigneo Institute for in silico Medicine 11:30am - 11:45am
4.F: 5 Classification of retinal vein occlusion and diabetic macular edema with deep learning in OCT images 1INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering, Porto, Portugal; 2DEMec - Department of Mechanical Engineering, Faculty of Engineering of University of Porto (FEUP), Porto, Portugal; 3Surgery and Physiology Department, Faculty of Medicine of University of Porto (FMU; 4Ophthalmology Department, ULS São Joao, Porto, Portugal |
10:30am - 12:00pm | 4.G: Musculoskeletal System - Spine Location: 01.005 Chair I: Peter Varga Chair II: Paolo Carlo Danesini |
|
10:30am - 10:45am
4.G: 1 A novel in silico approach for the analysis of muscular loads in the lumbar spine 1LaBS, Department of Chemistry, Materials and Chemical Engineering “G.Natta”, Politecnico di Milano; 2IRCCS Galeazzi-Sant’Ambrogio Hospital, Italy 10:45am - 11:00am
4.G: 2 A novel in silico parametric tool for surgical-decision in lumbar spine fixation and fusion 1LaBS, Department of Chemistry, Materials and Chemical Engineering “G.Natta”, Politecnico di Milano, Italy; 2IRCCS Galeazzi-Sant’Ambrogio Hospital, Italy; 3Department of Neurosurgery, IRCSS Humanitas Research Hospital, Milan, Italy 11:00am - 11:15am
4.G: 3 Spine surgery planification to avoid proximal junctional failure: A multi-criteria approach using finite element modelling 1BCN MedTech, DTIC, Pompeu Fabra University, Barcelona, Spain; 2Hospital del Mar, Barcelona, Spain; 3University Hospital Vall d’Hebron, Barcelona, Spain; 4ICREA, Barcelona, Spain; 5Shulthess Klinik, Zurich, Switzerland 11:15am - 11:30am
4.G: 4 In silico functional assessment of a new bio-degradable cage for lumbar interbody fusion through a fully-parametric spine model generator 1Politecnico di Milano, Italy; 2Greenbone Ortho S.p.A., Italy; 3IRCCS Istituto Ortopedico Galeazzi, Italy 11:30am - 11:45am
4.G: 5 Modelling percutaneous vertebroplasty (and other processes) using the theory of porous media University of Stuttgart, Germany |
10:30am - 12:00pm | 4.H: Neurotechnology for Human Movement Location: 01.003 Chair I: Can A. Yucesoy |
|
10:30am - 10:45am
4.H: 1 From novel muscular mechanics principles to neurotechnology for human movement Bogazici University, Turkiye 10:45am - 11:00am
4.H: 2 Integrating intraoperative testing with musculoskeletal modeling: Muscle force-length relationship in patients with cerebral palsy 1Institute of Structural Mechanics and Dynamics in Aerospace Engineering, University of Stuttgart, Stuttgart, Germany; 2Institute of Biomedical Engineering, Boğaziçi University, Istanbul, Türkiye 11:00am - 11:15am
4.H: 3 The development of LSTM-based ankle position and moment estimator for powered ankle prosthesis using nonnormalized sEMG and feature inputs 1Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart, Stuttgart, Germany; 2Institute of Biomedical Engineering, Boğaziçi University, Istanbul, Türkiye 11:15am - 11:30am
4.H: 4 Boosting the performance of lightweight deep learning models with attention in human activity recognition 1University of Twente; 2Bogazici University 11:30am - 11:45am
4.H: 5 Joint angle generation for human walking using conditional neural movement primitives Bogazici University, Turkiye 11:45am - 12:00pm
4.H: 6 Smartphone application for quantitative assessment of gait and balance impairments in stroke patients 1Aberystwyth University, United Kingdom; 2Nottingham Trent University, United Kingdom; 3Universidad Maimónides, Argentina; 4Universidad Nacional de La Matanza, Argentina |
12:00pm - 1:00pm | Lunch break II: Lunch break Location: Foyer I+II |
12:00pm - 1:00pm | Meet the mentor: Meet the mentor Location: 01.015 |
1:00pm - 2:30pm | Panel Discussion: VPH Panel Discussion: Stronger together: the importance of community work for advancing science and healthcare Location: -2.033 (Big auditorium) |
2:30pm - 3:30pm | Coffee break II: Coffee break Location: Foyer II (In front of auditoriums) |
2:30pm - 3:30pm | P2: Poster Session 2 Location: Foyer II (In front of auditoriums) |
|
P2: 1
Incorporating wearable sensor data into research workflows Auckland Bioengineering Institute, University of Auckland, New Zealand P2: 2
Modelling the neural regulation of gastric motility at the tissue level University of Auckland, New Zealand P2: 3
Efficient numerical simulation of effective micro-macro models for reactive transport in elastic perforated media 1FAU Erlangen-Nürnberg, Germany; 2Universität Heidelberg, Germany P2: 4
The development of the phantom fiber to mimick muscle fibre activity for the validation of magnetomyography sensors 1Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart, Stuttgart, Germany; 2Stuttgart Center for Simulation Sciences (SC SimTech), University of Stuttgart, Stuttgart, Germany; 3MEG-Center Tübingen, University of Tübingen, Tübingen, Germany P2: 5
A multiscale network model of tumor microenvironment to predict immunotherapeutic response of head and neck cancers 1Department of Pathology and Genomic Medicine, Thomas Jefferson University, Philadelphia, Pennsylvania, United States of America; 2Department of Pharmacology, Physiology and Cancer Biology, Thomas Jefferson University, Philadelphia, Pennsylvania, United States of America; 3Department of Otolaryngology - Head and Neck Surgery, Thomas Jefferson University, Philadelphia, Pennsylvania, United States of America; 4Sidney Kimmel Cancer Center, Thomas Jefferson University, Philadelphia, Pennsylvania, United States of America P2: 6
Mechanobiological modelling to capture relative effects of deviatoric and volumetric stresses on epiphyseal bone growth 1Universitat Pompeu Fabra, Spain; 2ICREA, Spain P2: 7
Sensory perturbation due to blood flow restriction leads to change in active MU pool 1Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart, Stuttgart, Germany; 2Stuttgart Center for Simulation Science, University of Stuttgart, Stuttgart, Germany; 3Department of Electrical Engineering and Automation, Aalto University, Espoo, Finland; 4Department of Biomechatronic Systems, Fraunhofer Institute for Manufacturing Engineering and Automation, Stuttgart, Germany P2: 8
A graphic representation of arterial pulse pressure vs. mean arterial pressure time series may be used for clinical decision support during intraoperative hypotension 1University of Ljubljana, Medical faculty, Ljubljana, Slovenia; 2University Clinical Centre, Ljubljana, Slovenija P2: 9
Development of a hemodynamic model to simulate heart failure patients 1Charité - Universitätsmedizin Berlin, Germany; 2Deutsches Herzzentrum der Charité, Institute of Computer-assisted Cardiovascular Medicine, Berlin, Germany P2: 10
Hypertensive signature in the photoplethysmography signal by combining a whole-body cardiovascular model and optical simulations Univ. Grenoble Alpes, CEA, LETI, DTIS, Grenoble, France P2: 11
Pre-procedural planning of transcatheter heart valve interventions using imaging and in silico modelling University of Cambridge, United Kingdom P2: 12
A 0D-1D global, closed-loop model of the cardiovascular system 1Dipartimento di Matematica, Università di Trento, (Italy); 2Department of Mathematics and Scientific Computing, NAWI Graz, University of Graz (Austria); 3Gottfried Schatz Research Center: Division of Biophysics, Medical University of Graz (Austria); 4BioTechMed-Graz, (Austria) P2: 13
In silico validation of TAG-based coronary blood flow distribution methods for patient-specific computational iFR prediction University of Trento, Italy P2: 14
A comparative study between 3D segmentation methods of aorta in contrast enhanced MR acquisitions 1Electrical Engineering and Computer Science, Transilvania University of Brasov, Romania; 2Advanta, Siemens SRL, Brasov, Romania P2: 15
Simulation workflow for stent-assisted coiling of brain aneurysms Simq GmbH, Germany P2: 16
Atmospheric pollutants and atrial arrhythmias: An in silico study 1MATBIOM, Universidad de Medellín, Medellín, Colombia; 2Department of Molecular Pharmacology and Physiology, Morsani College of Medicine, University of South Florida, Tampa, FL, United States; 3Centro de Investigación e Innovación en Bioingeniería, Universitat Politècnica de València, Valencia, Spain P2: 17
In-silico assessment of hemodynamics in stenoses of the fontan circulation 1Institute of Computer-assisted Cardiovascular Medicine, Charité – Universitätsmedizin Berlin, Germany; 2Deutsches Herzzentrum der Charité, Berlin, Germany; 3Department of Pediatric Cardiology, Charité – Universitätsmedizin Berlin, Germany; 4DZHK (German Centre for Cardiovascular Research), partner site Berlin, Germany P2: 18
A clinical decision support tool for patient management Sano – Centre for Computational Personalised Medicine International Research Foundation, Poland P2: 19
Creation and regression analysis of a hemodynamic virtual patient database Department of Hydrodynamic Systems, Faculty of Mechanical Engineering, Budapest University of Technology and Economics Műegyetem rkp. 3., H-1111 Budapest, Hungary P2: 20
Towards a prostate cancer radiotherapy digital twin: Simulating the response of prostate cancer to external radiotherapy through mechanistic multiscale modelling. Sensitivity analysis and clinical adaptation 1National Technical University of Athens, School of Electrical and Computer Engineering, Institute of Communication and Computer Systems, In Silico Oncology and In Silico Medicine Group, Greece; 2University of Freiburg, Faculty of Medicine, University Medical Center Freiburg, Department of Radiation Oncology, Germany; 3German Cancer Consortium (DKTK). Partner Site Freiburg, Germany; 4Berta-Ottenstein-Programme, Faculty of Medicine, University of Freiburg, Freiburg, Germany; 5University of Freiburg, Faculty of Medicine, University Medical Center Freiburg, Department of Radiation Oncology, Division of Medical Physics, Germany; 6German Oncology Center, European University Cyprus, Limassol, Cyprus P2: 21
Recommendations and requirements for implementing computational models in clinical integrated decision support systems (ISO/TS 9491-2) 1Universidad Politécnica de Madrid-Life Supporting Technologies Research Group, ETSIT, 28040 Madrid, Spain; 2Unit of Maxillofacial Surgery, Department of Medicine and Surgery, University Hospital of Parma, Parma, Italy; 3Forschungszentrum Jülich GmbH, Projekt Management Jülich, Jülich, Germany; 4DIN - German Institute for Standardization, Berlin, Germany; 5Heidelberg Institute for Theoretical Studies (HITS gGmbH), Heidelberg, Germany P2: 22
Benchmarking computational models of peritoneal dialysis in pigs and patients 1Maastricht University, the Netherlands; 2UMC Utrecht, the Netherlands; 3Lund University, Sweden P2: 23
Toward multiscale lymph node model: T cell search strategy study CUNI, Czech Republic P2: 24
Software infrastructure tools for biomedical models in systems biology University of Washington, United States of America P2: 25
Probabilistic Boolean modelling highlights neural tube closure dynamics and molecular signalling insights 1Luxembourg University, Luxembourg; 2Centre for Health Protection, National Institute for Public Health and the Environment (RIVM), Bilthoven, The Netherlands; 3Biomechanics Research Unit, GIGA In Silico Medicine, University of Liège, Belgium; Skeletal Biology and Engineering Research Center, KU Leuven, Belgium; 4Biomechanics Section, Department of Mechanical Engineering, KU Leuven, Belgium; 5Institute of Molecular Psychiatry, University of Bonn, Bonn, Germany; 6ELIXIR Luxembourg, Belvaux, Luxembourg P2: 26
Explanatory models of human physiology to teach pathophysiology of diabetic ketoacidosis with simulators First Faculty of Medicine, Charles University Prague, Czech Republic P2: 27
In silico clinical trial to predict the efficacy of alendronate for preventing hip fractures 1Department of Industrial Engineering, Alma Mater Studiorum, University of Bologna, Italy; 2Faculty of Applied Sciences, University of Liège, Belgium; 3Biomechanics Section, Department of Mechanical Engineering, KU Leuven, Belgium; 4Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy P2: 28
Comparative assessment of lower limb joint angle estimation between BTS system and OpenSim 1Indian Institute of Technology Delhi, India; 2All Indian Institute of Medical Sciences, New Delhi, India; 3Indraprastha Apollo Hospital, New Delhi, India; 4Defense Institute of Physiology & Allied Science, Defence Research & Development Organisation, Delhi, India; 5Center of Excellence, Footwear Design & Development Institute, Noida, India P2: 29
Quantification of periprosthetic bone loss using electrical impedance tomography University of Rostock, Germany P2: 30
Machine learning framework to study the impact of metastatic cancer in the spine 1UCL Mechanical Engineering, London, UK; 2UCL Centre for Computational Medicine, Division of Medicine, London, UK P2: 31
A sustainable neuromorphic framework for disease diagnosis using AI RWTH Aachen, Germany P2: 32
Limits and capabilities of diffusion models for the anatomic editing of digital twins 1MIT, United States of America; 2Brigham and Women's Hospital P2: 33
Cross-disease predictive analysis for pandemic preparedness 1Institute for Computational Biomedicine, RWTH Aachen, Germany; 2Departement of Intensive Care Medicine, University Hospital RWTH Aachen, Germany |
3:30pm - 5:00pm | 5.A: Heart Modelling - Applications II Location: 05.019 Chair I: David Nordsletten Chair II: Joshua R. Dillon |
|
3:30pm - 3:45pm
5.A: 1 Instantaneous biomechanical model of the heart to characterize ventricular remodeling in complex congenital heart disease 1UT Southwestern Medical Center, United States of America; 2Department of Cardiology, Boston Children’s Hospital, Boston, MA, USA; 3Department of Cardiac Surgery, Boston Children’s Hospital, Boston, MA, USA; 4Division of Cardiology, Department of Pediatrics, Children’s Hospital of Philadelphia, Philadelphia, PA, USA 3:45pm - 4:00pm
5.A: 2 Construction and manufacturing of an MRI-ready experimental left heart phantom model 1ICM, Deutsches Herzzentrum der Charité, Germany; 2Einstein Center Digital Future 4:00pm - 4:15pm
5.A: 3 Predicting cardiac conduction disturbances during balloon aortic valvuloplasty from patient-specific computational models 1Centre for Computational Imaging and Simulation Technologies in Biomedicine (CISTIB); 2University of Leeds, United Kingdom; 3Synopsys, Inc.; 4Boston Scientific Corporation; 5Leeds Teaching Hospitals NHS Foundation Trust; 6Christabel Pankhurst Institute; 7University of Manchester, United Kingdom 4:15pm - 4:30pm
5.A: 4 Hierarchical VVUQ strategy for the development and credibility assessment of a pulmonary heart valve model 14RealSim Services BV, Netherlands, The; 2Leartiker, Spain; 3TU-Graz, Austria; 4TU-Delft, Netherlands, The 4:30pm - 4:45pm
5.A: 5 Predictive model for the assessment of the TEVAR procedure 1Politecnico di Milano, Italy; 2Humanitas University, IT 4:45pm - 5:00pm
5.A: 6 Alterations of the in vivo myocardium mechanical properties in aortic stenosis: Finite element analysis in a rat model 1Simula Research Laboratory, Oslo, Norway; 2Institute for Experimental Medical Research, Oslo University Hospital and University of Oslo, Oslo, Norway; 3K.G. Jebsen Center for Cardiac Research, University of Oslo, Oslo, Norway |
3:30pm - 5:00pm | 5.B: Aneurysms & Appendages Location: 02.017 Chair I: Giulia Luraghi |
|
3:30pm - 3:45pm
5.B: 1 In silico pre-operative TEVAR planning: Application to a patient-specific case 1Politecnico di Milano, Milan, Italy; 2Fondazione IRCCS Ca’ Granda Ospedale Maggiore Policlinico, Milan, Italy; 3Università degli Studi di Milano, Milan, Italy 3:45pm - 4:00pm
5.B: 2 The role of secondary flow activities in the emergence of sidewall intracranial aneurysms Budapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Hydrodynamics Systems,Hungary 4:00pm - 4:15pm
5.B: 3 Use of shape analysis and computational fluid dynamics for identification of factors relevant for aneurysm rupture 1Insigneo Institute for in silico medicine, University of Sheffield, United Kingdom; 2Sano Centre for Computational Medicine, Krakow, Poland 4:15pm - 4:30pm
5.B: 4 Virtual particle tracking in geometries with cerebral aneurysms Department of Hydrodynamic Systems, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary 4:30pm - 4:45pm
5.B: 5 Left atrial appendage occlusion: A virtual model to simulate the implant procedure in patient-specific scenarios 1Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, Italy; 2Department of Civil and Environmental Engineering, Politecnico di Milano, Italy; 3BioCardioLab, Bioengineering Unit, Fondazione Monasterio, Italy 4:45pm - 5:00pm
5.B: 6 Left atrial wall dynamics in in-silico fluid simulations of atrial fibrillation patients 1Universitat Pompeu Fabra, Barcelona, Spain; 2Biomedical Engineering and Physics, Amsterdam University Medical Centers, Amsterdam, The Netherlands; 3Radiology and Nuclear Medicine, Amsterdam University Medical Centers, Amsterdam, The Netherlands; 4Cardiology, Amsterdam University Medical Centers, Amsterdam, The Netherlands; 5Inria, France |
3:30pm - 5:00pm | 5.C: Good Simulation Practice in Healthcare Location: 07.017 Chair I: Nils Karajan Chair II: Charlott Danielson |
|
3:30pm - 4:00pm
5.C: 1 Saving lives today while building the personal digital avatar: An ambitious yet pragmatic digital transformation of healthcare 1ANSYS, Wavre, Belgium; 2Avicenna Alliance, Brussels, Belgium 4:00pm - 4:15pm
5.C: 2 PyAnsys-heart: A python library for LS-DYNA multi-physics heart simulations 1Ansys, Netherlands; 2Ansys, France; 3Ansys, USA 4:15pm - 4:30pm
5.C: 3 Toward good simulation practice: Best practices for the use of computational modelling and simulation in the regulatory process of biomedical products 1InSilicoTrials Technologies, Trieste, Italy; 2Avicenna Alliance, Brussels, Belgium; 3ANSYS, Wavre, Belgium; 4VPH Institute, Leuven, Belgium; 5University of Liège, Belgium; 6KU Leuven, Belgium; 7Alma Mater Studiorum – University of Bologna, Italy 4:30pm - 4:45pm
5.C: 4 AlmaHealthDB: A digital infrastructure for secure management, interoperability and reuse of health research data 1Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Bologna (IT); 2Department of Information Engineering, Alma Mater Studiorum – University of Bologna (IT); 3Department of Industrial Engineering, Alma Mater Studiorum – University of Bologna (IT) 4:45pm - 5:00pm
5.C: 5 An in silico medicine info kit for effective stakeholder engagement 1Virtual Physiological Human Institute (VPHi), Belgium; 2Centre for Sociological Research, KU Leuven, Belgium; 3GIGA Research Institute, , University of Liège, Belgium; 4Division of Biomechanics, KU Leuven, Belgium |
3:30pm - 5:00pm | 5.D: Cellular & Systems Biology II Location: 02.005 Chair I: David Phillip Nickerson Chair II: Fariba Bahadori |
|
3:30pm - 3:45pm
5.D: 1 Physiome: Encouraging the publication and reuse of reproducible models 1Auckland Bioengineering Insitute, University of Auckland, New Zealand; 2Plant and Food Research, New Zealand 3:45pm - 4:00pm
5.D: 2 Development of a computational inflammation model of osteoarthritis including obesity Insigneo Institute, Department of Mechanical Engineering, University of Sheffield, United Kingdom 4:00pm - 4:15pm
5.D: 3 Modeling the interplay among TIMP, proteases and proinflammatory cytokines within the human intervertebral disc Pompeu Fabra University, Spain 4:15pm - 4:30pm
5.D: 4 Building a digital twin for rheumatoid arthritis, one cell at a time 1University of Toulouse III - Paul Sabatier & INRIA Saclay; 2University of Evry, Paris Saclay & Sanofi Aventis R&D; 3University of Evry, Paris Saclay & INRIA Saclay; 4University of Evry, Paris Saclay; 5INRIA Saclay; 6Sanofi Aventis R&D 4:30pm - 4:45pm
5.D: 5 A sympathetic neuron computational model for hypertension treatment 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Department of Physiology, Anatomy, and Genetics, University of Oxford, UK; 3Department of Computer Science, University of Oxford, UK; 4Department of Neuro, Physiology, and Pharmacology, University College London, UK; 5Institute of Developmental and Regenerative Medicine, University of Oxford, UK 4:45pm - 5:00pm
5.D: 6 Computational modelling for mechanistic explorations of biomarkers and biomechanical cues in atherosclerosis 1Pompeu Fabra University, Spain; 2Consejo Superior de Investigación Científica (CSIC), Spain |
3:30pm - 5:00pm | 5.E: Lung Modelling II Location: 02.011 Chair I: Martin Genet |
|
3:30pm - 3:45pm
5.E: 1 The use of rapid expiratory occlusion (REO) to simultaneously identify lung elastance, airway resistance, and muscular effort University of, New Zealand 3:45pm - 4:00pm
5.E: 2 Pulmonary elastance identification and predictive methodology for PCV in a digital twin 1University of Canterbury, New Zealand; 2University of Liege, Belgium 4:00pm - 4:15pm
5.E: 3 Bridging micro to macro in pulmonary mechanics: Interpretable neural networks for surrogate modelling 1Laboratoire de Mécanique des Solides, École Polytechnique/ CNRS/IPP, France; 2Inria, France 4:15pm - 4:30pm
5.E: 4 Integrating macro-vascular and micro-vascular models to elucidate wall shear stress dynamics in pulmonary hypertension: A novel approach to understanding CTEPH development The University of Auckland, New Zealand 4:30pm - 4:45pm
5.E: 5 A virtual asthma patient successfully predicts patient-specific impact of bronchial thermoplasty University of Leicester, United Kingdom |
3:30pm - 5:00pm | 5.F: Population-based Modelling Location: 09.019 Chair I: Julie Choisne |
|
3:30pm - 3:45pm
5.F: 1 Classification of glenoid bone loss patterns using statistical shape modelling 1Auckland Bioengineering Institute, University of Auckland, Auckland, New Zealand; 2Northland Orthopaedic Clinic, Whangarei, New Zealand; 3Shoulder and Elbow Clinic, Macquarie University, Sydney, NSW, Australia 3:45pm - 4:00pm
5.F: 2 Strain analysis in the right ventricular outflow tract using non-parametric deformable shape modelling 1Institute of Cardiovascular Sciences, University College London, London, United Kingdom; 2Great Ormond Street Children’s Hospital, London, United Kingdom; 3College of Engineering, Design and Computing, University of Colorado, Aurora, CO, United States of America; 4Department of Pediatric Cardiology, University of Colorado, Aurora, CO, United States of America; 5The Heart Institute, Children's Hospital Colorado, Aurora, CO, United States of America; 6School of Medicine, Anschutz Medical Campus, University of Colorado, Aurora, CO, United States of America; 7Department of Cardiology, University of Colorado Hospital, Aurora, CO, United States of America 4:00pm - 4:15pm
5.F: 3 Hexahedral mesh fitting using scaffolds and statistical shape modelling to reproduce the cortical bone morphology of the femur Auckland Bioengineering Institute, University of Auckland, New Zealand 4:15pm - 4:30pm
5.F: 4 Development of a statistical shape and density model of the paediatric femur for personalised FE models in children Auckland Bioengineering Institute, The University of Auckland, New Zealand 4:30pm - 4:45pm
5.F: 5 Generation of digital genetic twins satisfying utility and privacy metrics for robust post-hoc analyses 1Nantes Université, CHU Nantes, INSERM, Center for Research in Transplantation and Translational Immunology, UMR 1064, F-44000 Nantes, France; 2Ecole Centrale de Nantes, F-44300 Nantes, France; 3Nantes Université, CHU Nantes, PHU11Santé Publique, Clinique des données, INSERM CIC 1413, F-44000 Nantes, France 4:45pm - 5:00pm
5.F: 6 Domain adaptation methods for emotion and pain recognition via synthetic data 1University of Stuttgart, Germany; 2University Medicine Essen, Germany |
3:30pm - 5:00pm | 5.G: In-silico Orthopedics I Location: 01.005 Chair I: Philippe Favre Chair II: Okan Avci |
|
3:30pm - 4:00pm
5.G: 1 In-silico analysis of physiological joint mechanics within a complex musculoskeletal leg-system and its application to biomechanical evaluation of implants 1Fraunhofer IPA, Germany; 2Fraunhofer IPA, Germany; 3Fraunhofer IPA, Germany 4:00pm - 4:15pm
5.G: 2 Development of a validated software framework for in-silico clinical trials of orthopedic devices Zimmer Biomet, Switzerland 4:15pm - 4:30pm
5.G: 3 In silico clinical trial to predict the efficacy of alendronate for preventing hip fractures 1Department of Industrial Engineering, Alma Mater Studiorum, University of Bologna, Italy; 2Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy; 3Department of Mechanical Engineering, Biomechanics Section, KU Leuven, Belgium 4:30pm - 4:45pm
5.G: 4 Assessing hip implant stability: A parametric surrogate modelling approach 1Leibniz University Hannover, Institute of Mechanics and Computational Mechanics, Appelstraße 9a, Hannover, 30167, Germany; 2Hannover Medical School, TRR 298Safety Integrated and Infection Reactive Implants (SIIRI), Carl-Neuberg-Straße 1, Hannover, 30625, Germany; 3Leibniz University Hannover, International Research Training Group (IRTG) 2657, Appelstraße 11/11a, Hannover, 30167, Germany 4:45pm - 5:00pm
5.G: 5 In silico clinical trial for a regulatory submission of a total shoulder arthroplasty system 1Zimmer Biomet, Switzerland; 2Zimmer Biomet, USA |
3:30pm - 5:00pm | 5.H: Movement Biomechanics and Activity Tracking Location: 01.003 Chair I: Emma Fortune |
|
3:30pm - 4:00pm
5.H: 1 Estimating daily dynamic skeletal loading from ankle-worn activity monitors after menopause 1Mayo Clinic, Minnesota, United States of America; 2The University Medical Branch Texas, Texas, United States of America; 3Wake Forest University School of Medicine, North Carolina, United States of America 4:00pm - 4:15pm
5.H: 2 Validating the Fitbit Charge 6 wearable activity monitor for use in physical activity interventions in lung cancer: Study protocol 1Comprehensive Cancer Center, The Ohio State University, Columbus, Ohio, USA.; 2Arthur G. James Cancer Hospital and Richard J. Solove Research Institute, Columbus, Ohio, USA.; 3Division of Cancer Prevention and Control, Department of Internal Medicine, College of Medicine, The Ohio State University, Columbus, Ohio, USA.; 4Kinesiology, Department of Human Sciences, The Ohio State University, USA.; 5College of Medicine, The Ohio State University Columbus Ohio USA.; 6Division of Health Care Delivery Research, Robert D. and Patricia E. Kern Center for the Science of Health Care Delivery, Mayo Clinic, Rochester, Minnesota, USA. 4:15pm - 4:30pm
5.H: 3 Accelerating clinical decision making: Tailoring generic MSK models with subject-specific information is a good approximation to the personalized models 1Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna, Bologna, Italy; 2Laboratorio di Tecnologia Medica, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy; 3PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy; 4Department of Mechanical Engineering, University of Sheffield, Sheffield, UK; 5INSIGNEO Institute for in silico Medicine, University of Sheffield, Sheffield, UK 4:30pm - 4:45pm
5.H: 4 Gait analysis of patients with spinal cord injury: Influence of postoperative rehabilitation 1Indian Institute of Technology Delhi, India; 2All Indian Institute of Medical Sciences, New Delhi, India; 3Indraprastha Apollo Hospital, New Delhi, India; 4Defense Institute of Physiology & Allied Science, Defence Research & Development Organisation, Delhi, India; 5Center of Excellence, Footwear Design & Development Institute, Noida, India |
5:00pm - 6:00pm | VPH General Assembly: VPH General Assembly Location: -2.030 (Small auditorium) |
7:00pm - 11:00pm | Dinner: Conference Dinner Location: Alte Reithalle, Maritim Hotel |
Date: Friday, 06/Sept/2024 | |
8:30am - 9:00am | Registration III: Registration Location: Foyer I (Entry area) |
9:00am - 10:30am | 6.A: Heart Modelling - Perfusion and Blood Flow Location: 05.019 Chair I: Gernot Plank |
|
9:00am - 9:15am
6.A: 1 Data-driven analysis of modelling approaches for distal vessel trees in coronary blood flow King's College London, United Kingdom 9:15am - 9:30am
6.A: 2 An integrated computational model for coronary and myocardial blood flow applied in a clinical diagnostic setting 1LABS, DCMC, Politecnico di Milano, Italy; 2Cardiovascular Imaging Department, Centro Cardiologico Monzino, Italy; 3MOX, DMAT, Politecnico di Milano, Italy; 4School of Engineering, University of Limerick, Ireland; 5Bracco Imaging S.p.A., Italy; 6IMATI, CNR, Italy 9:30am - 9:45am
6.A: 3 Computational modeling of myocardial perfusion and oxygen transport in coronary venous retroperfusion treatments 1Michigan State University, USA; 2Marquette University and Medical College of Wisconsin, USA; 3California Medical Innovations Institute, USA 9:45am - 10:00am
6.A: 4 Integrating time-varying resistance in a lumped parameter model of the coronary circulation 1Institute of Cardiovascular Science, University College London, London, UK; 2Department of Mechanical Engineering, University College London, London, UK 10:00am - 10:15am
6.A: 5 Biventricular modelling of human heart with right ventricular outflow tract 1University of Glasgow, United Kingdom; 2Golden Jubilee National Hospital, Glasgow, United Kingdom 10:15am - 10:30am
6.A: 6 Examining flow dynamics after left atrial appendage occlusion using CFD simulations: Influence of device implant depth 1Universitat Pompeu Fabra, Spain; 2Department of Cardiology, Hospital Clinic Barcelona, Spain; 3Department of Cardiology, Hospital Universitario de Salamanca, Spain |
9:00am - 10:30am | 6.B: Stent Modelling Location: 02.017 Chair I: Dominik Schillinger Chair II: Anna Ramella |
|
9:00am - 9:15am
6.B: 1 Multiscale computational model of blood flow of deployed vascular stents University of Amsterdamm, Netherlands, The 9:15am - 9:30am
6.B: 2 Optimizing surgical outcomes in infants with ductal-dependent pulmonary blood flow conditions Istanbul Medipol University, Turkiye 9:30am - 9:45am
6.B: 3 Optimization of braided stent deployment techniques 1Université de Montréal, H3T 1J4 Montreal, Canada; 2Centre de Recherche du CHUM, H2X 0A9 Montréal, Canada; 3École de Technologie Supérieure, H3C 1K3 Montreal, Canada; 4Mechanical Engineering Department, McGill University, H3A 0C3 Montreal, Canada 9:45am - 10:00am
6.B: 4 Virtual coronary stenting simulations: On the use of data from patient-specific imaging for validation and clinical interpretation 1LaBS - Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy; 2Parametric Design, Gessate (MI), Italy; 3Department of Biomedical Research Institute–FORTH, University Campus of Ioannina, 45110 Ioannina, Greece; 42nd Department of Cardiology, University Hospital of Ioannina, 45110 Ioannina, Greece; 5Faculty of Medicine, School of Health Sciences, University of Ioannina, 45110 Ioannina, Greece; 6Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy 10:00am - 10:15am
6.B: 5 Effect of oversize stenting using a measurement-driven numerical approach for sidewall aneurysms Department of Hydrodynamic Systems, Faculty of Mechanical Engineering, Budapest University of Technology and Economics |
9:00am - 10:30am | 6.C: Experimental Surgery, Animal Models, and Model Transfer Location: 07.017 Chair I: Hans-Michael Tautenhahn |
|
9:00am - 9:15am
6.C: 1 Exploring hepatic vascular dynamics and function in metabolic syndrome and steatotic liver disease: Insights from human and rat models 1University Hospital Leipzig, Germany; 2Jena University Hospital, Germany 9:15am - 9:30am
6.C: 2 In-silico enhanced animal experiments for evaluation of cardiovascular implantable devices 1Institute of Computer-assisted Cardiovascular Medicine, Charité – Universitätsmedizin Berlin; 2Deutsches Herzzentrum der Charité; 3Biotronik SE & Co. KG; 4Technische Universität Dresden, Germany; 5Kurt-Schwabe-Institut für Mess- und Sensortechnik Meinsberg e.V., Meinsberg, Germany 9:30am - 9:45am
6.C: 3 Computer modelling of cortical pathophysiology in parkinsonism 1DHSU, United States of America; 2Emory University, USA; 3Georgetown University, USA 9:45am - 10:00am
6.C: 4 Induction of steatohepatitis in large animals – An example of successful collaboration between medical doctors, veterinarians, and basic scientists to establish a model for translational research 1Hannover Medical School, Germany; 2Mayo Clinic, USA 10:00am - 10:15am
6.C: 5 Reduced lifespan in rats with low intrinsic exercise capacity is associated with reduced complex I threshold in females in aging 1Universitätsklinikum Leipzig, Germany; 2Universitätsklinikum Jena, Germany |
9:00am - 10:30am | 6.D: Clinical Decision Support for Cardiovascular Applications Location: 09.019 Chair I: Frans van de Vosse |
|
9:00am - 9:15am
6.D: 1 Improved patient classification from 2D cardiac ultrasound using multi-modal transfer learning 1Auckland Bioengineering Institute, University of Auckland, Auckland, New Zealand; 2Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands; 3Counties Manukau Health Cardiology, Middlemore Hospital, Auckland, New Zealand; 4Green Lane Cardiovascular Service, Auckland City Hospital, Auckland, New Zealand; 5Department of Medicine, University of Auckland, Auckland, New Zealand; 6School of Biomedical Engineering and Imaging Sciences, King’s College London, London, United Kingdom; 7Department of Engineering Science and Biomedical Engineering, University of Auckland, Auckland, New Zealand 9:15am - 9:30am
6.D: 2 Bayesian inversion enables personalised septic shock treatment guided by noisy arterial pressure waveforms 1Imperial College London, London, United Kingdom; 2University College London, London, United Kingdom 9:30am - 9:45am
6.D: 3 Enhancing ECMO device development through machine-learned virtual patient data 1Department of Cardiovascular Engineering, Institute of Applied Medical Engineering, Helmholtz Institute, RWTH Aachen University, Aachen, Germany; 2ARDS and ECMO Centre Cologne-Merheim, Dept. of Pneumology and Critical Care Medicine, Kliniken der Stadt Köln gGmbH, Witten/Herdecke University, Cologne, Germany; 3Institute for Computational Biomedicine II, University Hospital Aachen, RWTH Aachen University, Aachen, Germany 9:45am - 10:00am
6.D: 4 Towards an in silico clinical trial on the use of fractional flow reserve based on a data-driven modeling approach 1Eindhoven University of Technology, Netherlands, The; 2Catharina Hospital Eindhoven, Netherlands, The 10:00am - 10:15am
6.D: 5 Predicting ventricular tachycardia, taking time into the equations 1Eindhoven University of Technology, the Netherlands; 2Catharina Hospital Eindhoven, the Netherlands 10:15am - 10:30am
6.D: 6 Patient-specific hemodynamic effects of acute exercise in hypertensive subjects and controls revealed by 4D flow MRI and cardiovascular modeling 1Department of Biomedical Engineering, Linköping University, Linköping, Sweden; 2Center for Medical Image Science and Visualization (CMIV), Linköping University, Linköping, Sweden; 3Department of Health, Medicine and Caring Sciences, Linköping University, Linköping, Sweden; 4Department of Clinical Physiology in Linköping, and Department of Health, Medicine and Caring Sciences, Linköping University, Linköping, Sweden |
9:00am - 10:30am | 6.E: Human Brain Modelling Location: 02.011 Chair I: Silvia Budday Chair II: Lukas Vosse |
|
9:00am - 9:30am
6.E: 1 Multiscale modelling in deep brain stimulation University of Rostock, Germany 9:30am - 9:45am
6.E: 2 Holography-assisted simulation of brain function 1Sano Center for Computational Personalised Medicine, Poland; 2University of Warsaw; 3Ledholo Sp. z o.o 9:45am - 10:00am
6.E: 3 Multiscale model of spreading depolarization in neocortical microcircuits 1Department of Physiology and Pharmacology, SUNY Downstate Health Sciences University; 2Department of Biomedical Engineering Doctor of Philosophy, Columbia University; 3Health Informatics Program, Yale School of Public Health; 4Department of Pathology, Yale School of Medicine; 5Department of Biostatistics, Yale University; 6Program in Computational Biology and Bioinformatics, Yale University,; 7Wu Tsai Institute, Yale University; 8Department of Neurology, SUNY Downstate Health Sciences University; 9Department of Neurology, Kings County Hospital Center; 10The Robert F. Furchgott Center for Neural and Behavioral Science 10:00am - 10:15am
6.E: 4 Investigation of intracranial dynamics using a personalised computational model The University of Auckland, New Zealand 10:15am - 10:30am
6.E: 5 Challenges and perspectives in human brain tissue modeling Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany |
9:00am - 10:30am | 6.F: Pathway to Digital Twins Location: 02.005 Chair I: Thiranja Prasad Babarenda Gamage Chair II: Julia Musgrave |
|
9:00am - 9:15am
6.F: 1 From clinical research to digital twins: How personalised computational modelling can add value in clinical care 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Liggins Institute, University of Auckland, Auckland, New Zealand; 3Starship Hospital, Te Toka Tumai Auckland, Auckland, New Zealand 9:15am - 9:30am
6.F: 2 A demonstrator of the EDITH virtual human twin platform ACC Cyfronet AGH and Sano Centre for Computational Medicine, Krakow, Poland, Poland 9:30am - 9:45am
6.F: 3 12 Labours DigitalTWINS platform: Enabling development and clinical translation of virtual human twins 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Auckland University of Technology, New Zealand; 3GALATA-Digital; 4Department of Engineering Science and Biomedical Engineering, University of Auckland, New Zealand 9:45am - 10:00am
6.F: 4 AI-CARE: Digital twin for cancer research 1Department of Computer Science, University of Sheffield, United Kingdom; 2Insigneo Institute for in Silico Medicine, University of Sheffield, Sheffield, United Kingdom 10:00am - 10:15am
6.F: 5 OSS-DBS v2.0: Adaptive meshing for deep brain stimulation modeling 1Institute of General Electrical Engineering, University of Rostock, Germany; 2Department of Neurology Brigham & Women's Hospital, Harvard Medical School, USA; 3Department Life, Light & Matter, University of Rostock, Germany; 4Department of Ageing of Individuals and Society, University of Rostock, Germany; 5Now with: Synthetic Physiology Lab, University of Pavia, Italy |
9:00am - 10:30am | 6.G: In-silico Orthopedics II Location: 01.005 Chair I: Philippe Favre Chair II: Okan Avci |
|
9:00am - 9:30am
6.G: 1 Experimental validation of in silico models of orthopaedic implants Alma Mater Studiorum - University of Bologna, Italy 9:30am - 9:45am
6.G: 2 InSole: An in-silico workflow towards personalized prescription of corrective insoles during walking 1Human Movement Biomechanics Research Group, Department of Movement Sciences, KU Leuven; 2Materialise Motion, Materalise NV; 3Biomechanics Section, Department of Mechanical Engineering, KU Leuven 9:45am - 10:00am
6.G: 3 In-silico analysis of dropfoot disease and biomechanical evaluation of ankle-foot orthoses Fraunhofer IPA, Germany 10:00am - 10:15am
6.G: 4 Verification of finite element wear models of a total ankle replacement 1IRCCS Istituto Ortopedico Rizzoli, Bologna (Italy); 2Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna (Italy); 3Department of Civil and Industrial Engineering, University of Pisa (Italy); 4Center for Rehabilitative Medicine “Sport and Anatomy”, University of Pisa (Italy) 10:15am - 10:30am
6.G: 5 Digital orthopedic methods for total knee arthroplasty: Insights from comparative analysis and validation studies Istanbul Medipol University, Turkiye |
9:00am - 10:30am | 6.H: In-silico Toxicology Location: 01.003 Chair I: Luiz Carlos Maia Ladeira |
|
9:00am - 9:15am
6.H: 1 Prediction of higher airway particle deposition in children compared with adults: A modelling study Auckland Bioengineering Institute, New Zealand 9:15am - 9:30am
6.H: 2 Towards a virtual embryo: Computational modeling of neural tube closure defects 1Utrecht University, The Netherlands; 2IRAS, Utrecht University, The Netherlands; 3Biocomplexity Institute, Indiana University, Bloomington, United States; 4Department of Physics, NC State University, Raleigh, North Carolina, United States; 5U.S. EPA/ORD, Research Triangle Park, North Carolina, United States 9:30am - 9:45am
6.H: 3 Development of a multiscale data-driven lung model to understand the health effects of vaping 1Auckland Bioengineering Institute, University of Auckland, New Zealand; 2Department of Anatomy & Medical Imaging, University of Auckland, New Zealand 9:45am - 10:00am
6.H: 4 Building disease ontology maps: In silico tools for applications in toxicology 1Biomechanics Research Unit, GIGA In Silico Medicine, University of Liège, Liège, Belgium; 2Department of In Vitro Toxicology and Dermato-cosmetology, Vrije Universiteit Brussel, Brussels, Belgium; 3IUF - Leibniz Research Institute for Environmental Medicine, Düsseldorf, Germany; 4Centre for Health Protection, National Institute for Public Health and the Environment (RIVM), Bilthoven, The Netherlands; 5Division of Pharmacology, Utrecht Institute for Pharmaceutical Sciences, Utrecht University, Utrecht, The Netherlands; 6Innovative Testing in Life Sciences & Chemistry, University of Applied Sciences Utrecht, The Netherlands; 7ToxTrack, Baltimore, MD, USA; 8Center for Alternatives to Animal Testing (CAAT) - Europe, University of Konstanz, Germany; CAAT, Johns Hopkins University, Baltimore, MD, USA; Johns Hopkins University, Doerenkamp-Zbinden Chair for Evidence-based Toxicology, Baltimore, MD, USA; 9Departamento de Bioquímica y Biología Molecular, Universidad de Valencia, Valencia, Spain; Experimental Hepatology and Liver Transplant Unit, Health Research Institute La Fe, Valencia, Spain; Centro de Investigación Biomédica en Red de Enfermedades Hepáticas y Digestivas (CIBERehd), Instituto de Salud Carlos III, Madrid, Spain; 10Medical Faculty, Heinrich-Heine University, Düsseldorf, Germany; 11Institute for Risk Assessment Sciences, Utrecht University, Utrecht, The Netherlands; 12Skeletal Biology and Engineering Research Center, Department of Development and Regeneration, KU Leuven, Leuven, Belgium; Biomechanics Section, Department of Mechanical Engineering, KU Leuven, Leuven, Belgium 10:00am - 10:15am
6.H: 5 Modelling toxicity after prostate cancer radiotherapy using genetically guided pixel-wise analysis 1Fondazione IRCCS - Istituto Nazionale dei Tumori, Italy; 2Politecnico di Milano, Italy; 3German Cancer Research Center (DKFZ), Germany; 4Icahn School of Medicine at Mount Sinai, US; 5Université de Montpellier, France; 6University of Manchester, UK; 7Maastricht University Medical Centre, The Netherland; 8University Hospitals Leuven, Belgium; 9University Medical Centre Mannheim, Germany; 10University of Leicester, UK; 11Fundaciòn Pùblica Galega Medicina Xenòmica, Spain; 12Ghent University Hospital, Belgium; 13Medical College of Wisconsin, US; 14University of Cambridge, UK; 15Vall d'Hebron Institute of Oncology, Spain 10:15am - 10:30am
6.H: 6 Virtual Cornea: A computational approach for predicting corneal injury and recovery from chemical exposures 1Department of Intelligent Systems Engineering and Biocomplexity Institute, Indiana University, Bloomington, IN;; 2Center for Computational Toxicology and Exposure, Office of Research and Development, United States Environmental Protection Agency, Research Triangle Park, NC;; 3Procter & Gamble, Technical Centre, Reading, United Kingdom |
10:30am - 11:00am | Coffee break IV: Coffee break Location: Foyer II (In front of auditoriums) |
11:00am - 11:55am | Advancing Arrhythmia Care with Digital Twins and AI Natalia A. Trayanova Johns Hopkins University, Baltimore, USA Location: -2.033 (Big auditorium) |
|
[Single Presentation of ID 482]: 1
|
12:00pm - 12:30pm | Closing: Closing Location: -2.033 (Big auditorium) |
12:30pm - 1:30pm | Break II: Break Location: Foyer I+II Lunch boxes will be provided for people, who participate in the post-conference workshops.
They will be served in the workshop-rooms. |
1:30pm - 3:30pm | CompuCell 3D: CompuCell 3D Location: 01.015 Led by James A. Glazier |
1:30pm - 4:30pm | ASME V&V 40: ASME V&V 40 training Location: 05.019 Led by Jeff Bischoff |
1:30pm - 4:30pm | WS Tools for impl: Tools for implementing the virtual human twin Location: 02.009 Led by David Nickerson, Peter Hunter, Thiranja Prasad Babarenda Gamage, Hugh Sorby and Greg Sands |
Contact and Legal Notice · Contact Address: Privacy Statement · Conference: VPH Conference 2024 |
Conference Software: ConfTool Pro 2.6.153 © 2001–2025 by Dr. H. Weinreich, Hamburg, Germany |