Laser Powder Bed Fusion (LPBF) of Copper-graphene Metal Matrix Composites for Enhanced Heat Transfer

Wessel W. Wits^1,2, Hyunjong Lee¹, Leonore van Goor¹, Bernard Geurts¹, Davoud Jafari³

1: Faculty of Electrical Engineering, Mathematics and Computer Science, University of Twente, Netherlands; 2: Royal Netherlands Aerospace Centre (NLR), Marknesse, Netherlands; 3: Faculty of Engineering Technology, University of Twente, Netherlands

Lightweight Thermal Management in Electric Vehicle Body Components: Injection‑Molded Thermoplastic Sandwiches with Embedded Electronics

Peter Meszmer^1,4, Sandy Klengel², Marcus Schulz³, Steffen Müller², Ralph Schacht⁵, Masoumeh Zarrabian³, Mohamad Abo Ras³, Bernhard Wunderle^1,4

1: Chair Materials and Reliability of Microsystems, TU Chemnitz, Germany; 2: Fraunhofer Institute for Microstructure of Materials and Systems: Halle, Germany; 3: Berliner Nanotest und Design GmbH, Germany; 4: Center for Materials, Architectures and Integration of Nanomembranes, TU Chemnitz, Germany; 5: Brandenburg University of Technology Cottbus-Senftenberg

Influence of Surface Roughness on the Thermal and Reliability Performance of Thermal Interface Materials

Aron Reinke, Antonio Harder, Santiago Campos, Teresa Bräuer, Mohamad Abo Ras, Pattric Zimon

Nanotest, Germany

Temperature-dependent Switching Current Density and Thermal-shock Response of Patterned Niobium Thin-film Structures for Cryogenic 3D Integration

Awais Qadir^1,3, Klaus Vogel², Nathanael Jöhrmann^1,2, Christian Hofmann², Uwe Zschenderlein¹, Matthias Prinz², Bernhard Wunderle^1,2,3,4

1: Professorship Materials and Reliability of Microsystems, Chemnitz University of Technology, Chemnitz, Germany; 2: Fraunhofer Institute for Electronic Nano Systems ENAS, Chemnitz, Germany; 3: Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Chemnitz University of Technology Chemnitz, Germany; 4: Micro Materials Centre Fraunhofer Institute for Electronic Nano Systems – ENAS Chemnitz, Germany

CuBrick: A Novel Vertical Dielectric Immersion Cooling Approach for Power Semiconductors

Johann Renner, Cuong Hoang, Till Huesgen

University of Applied Sciences Kempten, Germany

Design and Implementation of an Autonomous Sensor-driven Control Framework for Benchmarking Air-based Server Cooling

Eoin Oude Essink¹, Md Robiul Hossain^1,3, Ciara Ahern¹, Tim Persoons², Sajad Alimohammadi¹

1: Technological University Dublin, Ireland; 2: Trinity College Dublin, the University of Dublin, Ireland; 3: Digital Futures Research Hub, Technological University Dublin, Ireland

Optimisation of Overmolded PowerModules for EV Energy Conversion

Jérôme Hélie¹, Federicoie Ghioldi², Federico Piscaglia², Alexandre Marie³, Jean-Pierre Fradin³

1: Schaeffler, France; 2: Dept. of Aerospace Science and Technology, Politecnico di Milano, Milano, Italy; 3: ICAM school of Engineering, Toulouse, France

Development of a Test Bed to Analyse the Cooling Capability of an Air Amplifier for Data Centre Server Thermal Management

David W. Salter¹, Tim Persoons², Sajad Alimohammadi¹

1: School of Mechanical Engineering, Technological University Dublin, City Campus, Ireland; 2: Department of Mechanical, Manufacturing & Biomedical Engineering, Trinity College Dublin, Ireland

Packaging and Thermal Management Concept of Power Antenna-in-substrate (AiS) Chip-on-flex Assemblies on Curved Surfaces

Bernhard Wunderle^1,2,3,4, Jannik Haseloff⁵, Jörg Arnold¹, Jens Heilmann¹, Dragos Dancila⁶, George Konstantinidis⁷, Afshin Ziaei⁸, Mohamad Abo Ras⁵

1: TU Chemnitz, Germany; 2: Fraunhofer ENAS, Chemnitz, Germany; 3: Center for Materials, Architectures and Integration of Nanomembranes at TU Chemnitz, Germany; 4: Centre for Micro-and Nanotechnologies at TU Chemnitz, Germany; 5: Berliner Nanotest & Design GmbH, Germany; 6: Uppsala University, Sweden; 7: Foundation for Research and Technology Hellas (FORTH), Greece; 8: Thales Research and Technology, Palaiseau, France

Innovative Solution for Multiscale Warpage Measurement of Complex Integrated Packages

Pierre Everaere, Nicolas Choisel, Pierre Vernhes

INSIDIX, France

Lumped‑parameter Modelling of PCM‑integrated Heat Sinks with Experimental Validation

Michiel De Paepe^1,2, Maité Goderis^1,2, Jana Rogiers^1,2, Wito Plas^1,2, Michel De Paepe^1,2,3

1: Ghent University, Belgium; 2: FlandersMake@Ugent; 3: University of Cape Town, South Africa

Two-Phase Pool Boiling Immersion Cooling for Prismatic Lithium-Ion Batteries Subjected to Higher Discharge Rates

Rajesh Nimmagadda, Kantharuphan Annathurai, Daniel Trimble, Seamus M. O’Shaughnessy

Trinity College Dublin, Ireland

Electro-thermal Simulation of aSi0.33Ge0.665Sn0.005 Reconfigurable Field-effect Transistor

Duru Bozkurt¹, Andrea Malignaggi², Ignatii Zaitsev², Masiar Sistani³, Andreas Fuchsberger³, Nikolas Thomas Knaller³, Corrado Carta², Costanza Lucia Manganelli²

1: Sabanci University; 2: IHP-Leibniz Institute for High Performance Microelectronics, Germany; 3: Institute of Solid State Electronics, Technische Universit¨at Wien, Austria

Experimental and Numerical Investigation of an SLA-Manufactured Alumina Ceramic Heat Sink for Wide-Bandgap Power Modules

Lucie Teulet¹, Jean-Pierre Fradin², Ahmad Batikh², Alexandre Marie², Benjamin Périé², Virgile Puel², Emmanuel Marcault¹, Lucile Mage¹, Patrick Tounsi³

1: CEA, France; 2: ICAM, France; 3: LAAS-CNRS, France

Thermal Optimization of UVC LED Cooling Solutions Using a Combination of Thermal Simulations and Microthermography

Zygimantas Staliulionis, Rita Plaipaitė-Nalivaiko, Marjan Monshi

Lithuanian university of Applied Engineering Sciences, Lithuania

Parametric Model Order Reduction of an IGBT Module for System-level Electro-thermal Simulation

Shashwat Kamal Gogoi¹, Aliakbar Taghdiri^1,2, Philipp Hickisch¹, Dennis Hohlfeld¹, Tamara Bechtold^1,2

1: University of Rostock, Albert-Einstein-Str. 2, 18059 Rostock, Germany; 2: Jade University of Applied Sciences, Friedrich-Paffrath-Str. 101, 26386 Wilhelmshaven, Germany

Thermal Performance Evaluation of Aluminum-ammonia Heat Pipes for High-power Electronics Cooling

Reyhan Athalla, Van-Hoan Vu, Ho-Chuan Lin

EW JET PRODUCTS Co., Ltd., Taiwan

CFD-Based Thermal Analysis of a TPMS-Integrated Cooling Architecture for Battery Thermal Management System

Faisal Iqbal, Muhammad Sajid

University College Dublin, Ireland

Harvesting Electricity using Thermoelectric Cells

Przemyslaw Ptak, Piotr Arendt, Krzysztof Górecki

Gdynia Maritime University, Department of Power Electronics, Poland

Environmental Impact on Server Computational Performance

Eoin H. Oude Essink¹, Tim Persoons², Xiangjie Chen³, Sajad Alimohammadi¹

1: Technological University Dublin, Ireland; 2: Trinity College Dublin, Ireland; 3: Loughborough University

Analysis of Heat Transfer Coefficient Values and Temperature Distribution in Power Hybrid Electronic Circuits Cooled by Natural Convection

Marcin Janicki

Lodz University of Technology, Poland

High-Order ECM-Based Electro-Thermal Model for Lithium-Ion Batteries Incorporating Diffusion-Induced Concentration Polarization

Samuel Yu¹, Eonhyo Kim², Seungmin Lee¹, Jinwon Seo¹, Kisoo Yoo², Bongkeon Choi¹

1: Future Technology Convergence Institute, Hyundai Mobis, Republic of Korea; 2: School of Mechanical Engineering, Yeungnam University, Republic of Korea

A Method for Measuring Junction-to-Case Thermal Resistance in Bottom-Side-Cooling Packages

Julio Brandelero, Robin Jung, Alfio Pappalardo, Christale Crouard

STMicroelectronics SA

Experimental Thermo-Hydraulic Investigation of the Transition Toward Fully Direct Liquid-Cooled Server Architectures

Hussein Charaf^1,2, Michael Maalouly¹, Ali Chehade¹, Henryk Klaba¹, Tala Moussa², Chadi Maalouf², Guillaume Polidori²

1: OVHcloud, 155 Avenue Georges Hannart, 59170 Croix, France; 2: ITheMM, University of Reims Champagne-Ardenne, 51100 Reims, France

Thermal-aware Floor-planning and Optimization Workflow

Miroslav Valka

Synopsys Inc, Germany

Numerical Study of the Self- and Mutual-heating in GaAs pHEMT for MMIC Low-noise Amplifiers

Antonio Pio Catalano¹, Miriana Marino², Ciro Scognamillo¹, Salvatore Cimmino², Vincenzo d'Alessandro¹

1: Department of Electrical Engineering and Information Technology, University of Naples Federico II, Italy; 2: Microelectronics Division, MBDA Italia S.p.A., Bacoli, Italy

Experimental Performance Validation of Flow Guider Structures for Direct Cooling of Prismatic Battery Cells Under Asymmetric Heating Conditions

Lander Lode Cnudde^1,2, Jana Rogiers^1,2, Michiel De Paepe^1,2, Jasper Nonneman^1,2,3, Michel De Paepe^1,2,4

1: Ghent University, Belgium; 2: FlandersMake@UGent – Core lab MIRO, Belgium; 3: University of Antwerp, Belgium; 4: University of Cape Town, South Africa

Thermo-hydraulic Performance of Tetrahedral Lattice Cores under Laminar Flow: Effects of Strut and End Wall Material and Coolant Media

Ali Riaz, Mohammadreza Kadivar, John Lohan, David Tromey, Gerard McGranaghan

Atlantic Technological University, Ireland

Heat Spreading from a Small Source on a Thick Plate

Wendy Luiten

WLC, Netherlands, The

Guideline for Thermal Characterization of Multi-chip Packages Using Linear Superposition – A New JEDEC Standard

Dirk Schweitzer

Infineon Technologies AG, Germany

Cryogenic 3ω Platform for Thermal Conductivity Measurement of Thermal Interface Materials

Carlos Rincon-Ruiz^1,2, Corinna Grosse-Kockert⁵, Daniel May^1,5, Nathanael Joehrmann^1,2, Uwe Zschenderlein¹, Sven Zimmermann^1,3,4, Marcel Melzer^1,3,4, Matthias Prinz³, Bernhard Wunderle^1,2,3,4

1: Technische Universität Chemnitz, Germany; 2: Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN); 3: Fraunhofer ENAS, Chemnitz, Germany; 4: Center for Micro- and Nanotechnologies (ZfM), Chemnitz, Germany; 5: Berliner Nanotest und Design GmbH, Berlin, Germany

Two-Phase Pool Boiling Immersion Cooling for Prismatic Lithium-Ion Batteries Subjected to Higher Discharge Rates

Rajesh Nimmagadda, Kantharuphan Annathurai, Daniel Trimble, Seamus M. O’Shaughnessy

Trinity College Dublin, Ireland