Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
 
Session Overview
Date: Tuesday, 24/Aug/2021
2:00pm
-
5:00pm
Workshop I: Guidelines for Resilient thermal energy systems design in extreme climates
Chair: Dr. Alexander Zhivov, US Army Engineer Research and Development Center
1. Planning for the second edition of the Guide for Resilient Thermal Energy Systems Design in Cold and Arctic Climate.
The first edition has been recently published by ASHRAE https://www.wbdg.org/ffc/army-coe/design-guides/guide-for-resilient-thermal-energy-systems-design-in-cold-and-arctic-climates. It has been developed primarily by the team from North America with participation from Denmark. Contributions from other Nordic countries are welcome to finalize the next edition by the Cold Climate HVAC and Energy conference planned for 2023.

2. Guide for Resilient Thermal Energy Systems Design in Cold and hot and humid climate. The Guide will be developed in 2021 and will include information on:
- Specifics of design in hot and humid climate, corrosive environment in coastal and high-water table in inland areas,
- Requirements for building thermal conditions under normal and emergency operations; - Parameters for thermal energy systems resilience;
- Building envelope, including considerations for foundation construction in areas with a high-water table and in corrosive environment, typical building archetypes, recommendations for thermal characteristics (mass, U-value, vapor, water and air- barriers)
- Best practices for HVAC, including considerations for construction in corrosive environment, humidity control, pros and cons of different technologies, O&M;
- Best practices for district cooling systems
- Evaluation of maximum time to repair

Organizer: Dr. Alexander Zhivov, US Army Engineer Research and Development Center

Join the meeting from your computer, tablet or smartphone using this link:
https://global.gotomeeting.com/join/550008829

To participate and contribute with a presentation, please contact Dr. Zhivov
E-mail: Alexander.M.Zhivov@usace.army.mil
Phone: +1 217-417-6928

Other workshops can be organized on this day. Please contact Conference Chair, Prof. Carsten Rode to express such wishes.
5:00pm
-
6:00pm
Meeting I: IABP board meeting
Date: Wednesday, 25/Aug/2021
8:30am
-
8:40am
Welcome: Welcome Address
8:40am
-
10:00am
Plenary session I: Circular economy and reuse of materials
Location: Auditorium - Room 082, Building: 116
Chair: Dr. Pernille Berg, BLOXHUB
Professor (WSR) Morten Birkved, University of Southern Denmark
Co-Founder, Architect Kasper Guldager, Home.Earth
Moderator: Science Manager Pernille Berg, Bloxhub
10:00am
-
10:30am
Coffee break I
10:30am
-
11:15am
Session 01: CLT & moisture
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Targo Kalamees, Tallinn University of Technology
 
10:30am - 10:45am

The design of CLT envelopes in terms of hygrothermal performance

Villu Kukk, Jaan Kers, Targo Kalamees

TalTech University, Estonia



10:45am - 11:00am

Experimental analysis of moisture uptake in CLT end-grain exposed to free water

Kristo Kalbe1, Alvar Annuk2, Aime Ruus2, Targo Kalamees1

1: Tallinn University of Technology, nZEB Research Group, Estonia; 2: Tallinn University of Technology, Tartu College, Estonia



11:00am - 11:15am

Built-in Moisture in Cross-Laminated Timber Roofs - A Field Study

Jørn Emil Gaarder1, Trine Dyrstad Pettersen2

1: Norwegian University of Technology and Science (NTNU), Norway; 2: Takprodusentenes Forskningsgruppe (TPF), Norway

Session 02: Health, performance and environment
Location: Room 2 - Room 011, Building: 116
Chair: Dr. Marc Abadie, La Rochelle Université
 
10:30am - 10:45am

Relaxing and working from home: associations between heating, ventilation and cooling system typologies and indoor soundscape evaluation

Simone Torresin1,2, Rossano Albatici2, Francesco Aletta3, Francesco Babich1, Tin Oberman3, Agnieszka Elzbieta Stawinoga1, Jian Kang3

1: Eurac Research, Italy; 2: University of Trento, Italy; 3: University College London, UK



10:45am - 11:00am

Indoor Air Quality and Energy Performance in UK Classrooms – an Archetype Stock Modelling Approach

Yair Schwartz, Anna Mavrogianni, Daniel Godoy-Shimizu, Jie Dong, Ivan Korolija, Dejan Mumovic, Duncan Grassie

UCL, Institute for Environmental Design and Engineering, UK



11:00am - 11:15am

Analysis of the geographical location of IEQ complaints in the workplace through text-mining of online job reviews

Giorgia Chinazzo

Northwestern University, United States of America

Session 20: Building envelope
Location: Room 3 - Room 013, Building: 116
Chair: Prof. Staf Roels, KU Leuven
 
10:30am - 10:45am

Requirements to Building Envelope Characteristics in Cold Climates

Lyle Axelarris1, Aaron Cooke2, Craig Fredeen3, Robbin Garber-Slaght2, Emmett Leffel4, Lorne Ricketts5, William Rose6, John Zarling7, Alexander Zhivov8

1: Design Alaska, United States of America; 2: Cold Climate Housing Research Center, United States of America; 3: Cold Climate Engineering, United States of America; 4: Alaska Thermal Imaging, United States of America; 5: RDH Building Science, Canada; 6: William B. Rose & Associates, United States of America; 7: Zarling Aero and Engineering, United States of America; 8: US Army Engineer Research and Development Center, United States of America



10:45am - 11:00am

Hygrothermal performance of internally insulated masonry walls with embedded wooden beam heads: a field study on the impact of hydrophobisation

Evy Vereecken, Staf Roels

KU Leuven, Belgium



11:00am - 11:15am

Investigation of phase change materials (PCMs) on the heat transfer performance of building systems

Hongxia Zhou, Åke Fransson, Thomas Olofsson

Umeå University, Sweden

Session 04: PCMs used in buildings
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Umberto Berardi, Ryerson University
 
10:30am - 10:45am

Impact of Phase Change Material (PCM) Glazing on the Energy Consumption and Solar Radiation Transmission in an Office Room Located in a Semiarid Climate: Analysis of a Real-Scale Experiment

Daniel Uribe1,2, Sergio Vera1,2

1: Department of Construction Engineering and Management, School of Engineering, Pontificia Universidad Católica de Chile, Chile; 2: Center for Sustainable Urban Development, Pontificia Universidad Católica de Chile, Chile



10:45am - 11:00am

Characterization of application-sized PCM for incorporation in radiant ceiling panels: Calorimetric measurements and dynamic thermal behavior

Andres Gallardo, Umberto Berardi

Ryerson University, Canada



11:00am - 11:15am

Thermal behavior of light earth used for building insulation: Insight on PCM introduction impact

Farjallah Alassaad1, Karim Touati1, Daniel Levacher2, Nassim Sebaibi1

1: COMUE NU, Laboratoire de Recherche, ESITC Caen, 1 Rue Pierre et Marie Curie, 14610, Epron, France; 2: M2C UMR 6143 CNRS, Unicaen, ComUE Normandie Université, 24 rue des Tilleuls, 14000 Caen, France

Session 05: Artificial neural network (ANN)
Location: Room 5 - Room 019, Building: 116
Chair: Prof. Ryozo Ooka, The University Of Tokyo
 
10:30am - 10:45am

Thermal transmittance prediction based on the application of artificial neural networks on heat flux method results

Sanjin Gumbarević, Bojan Milovanović, Mergim Gaši, Marina Bagarić

University of Zagreb, Faculty of Civil Engineering, Croatia



10:45am - 11:00am

Utilizing High Performance Computing to Improve the Application of Machine Learning for Time-Efficient Prediction of Buildings’ Energy and Daylighting Performance

Rania Labib

Prairie View A&M University, Texas, United States of America



11:00am - 11:15am

Neural network for indoor airflow prediction with CFD database

Qi Zhou1, Ryozo Ooka2

1: Department of Architecture, The University of Tokyo, Japan; 2: Institute of Industrial Science, The University of Tokyo, Japan

11:15am
-
11:40am
Poster introductions 01: Moisture in building structures
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Targo Kalamees, Tallinn University of Technology
 
11:15am - 11:18am

Dependency of conservation conditions of Takase stone Buddha, Oita, Japan, on anisotropy of liquid water diffusivity

Masaru Abuku1, Shuya Hiranuma2, Soichiro Wakiya3, Daisuke Ogura4, Takayuki Fumoto1

1: Kindai University, Japan; 2: Sekisuihouse Co., Ltd., Japan; 3: Nara National Research Institute for Cultural Properties, National Institutes for Cultural Heritage; 4: Kyoto University



11:18am - 11:21am

An impact of moisture content on the air permeability of the fibrous insulation materials

Piotr Kosiński1, Robert Wójcik1, Dariusz Skoratko1, Shady Attia2

1: University of Warmia and Mazury in Olsztyn, Poland; 2: University of Liège, Belgium



11:21am - 11:24am

The effect of silanes as integral hydrophobic admixture on the physical properties of cement based materials

Alicja Wieczorek, Kalina Grabowska, Dalia Bednarska, Marcin Koniorczyk

Lodz University of Technology, Poland



11:24am - 11:27am

Identifying suitable inputs for the moisture risk assessment of waterproofed cavity walls with surface waterproofing treatment

Valentina Marincioni1,2, Virginia Gori3, Hector Altamirano-Medina1,2

1: UCL Institute for Environmental Design and Engineering, University College London, United Kingdom; 2: UK Centre for Moisture in Buildings, United Kingdom; 3: UCL Energy Institute, University College London, United Kingdom



11:27am - 11:30am

Interstitial condensation in Chinese residential buildings: cliché or challenge?

Hanyu Yang1,2, Xing Zheng1,2, Mingfang Tang1,2, Chi Feng1,2

1: School of Architecture and Urban Planning, Chongqing University, Chongqing , China; 2: Key Laboratory of New Technology for Construction of Cities in Mountain Area, Ministry of Education, Chongqing University, 400045 Chongqing, PR China



11:30am - 11:33am

Review of fungi in buildings and their ability to methylate chlorophenol into malodorous chloroanisoles.

Olle Ekberg

Lund University, Sweden



11:33am - 11:36am

Capillary rising damp in Venetian context: state of the art and numerical simulations

Erika Guolo, Piercarlo Romagnoni, Fabio Peron

University IUAV of Venezia, Italy

Poster introductions 02: IEQ & pollutants
Location: Room 2 - Room 011, Building: 116
Chair: Dr. Marc Abadie, La Rochelle Université
 
11:15am - 11:18am

Deterioration of PVC floor covering due alkaline moisture

Virpi Leivo, Essi Sarlin, Jommi Suonketo, Jussa Pikkuvirta, Matti Pentti

Tampere university, Finland



11:18am - 11:21am

Relationship between indoor and outdoor particulate matter (PM) concentration in the educational building

Tomasz Kisilewicz, Katarzyna Nowak-Dzieszko

Cracow University of Technology, Poland



11:21am - 11:24am

HIEQLab, a facility to support multi-domain human-centered research on building performance and environmental quality

Anna Pellegrino, Valentina Serra, Fabio Favoino, Arianna Astolfi, Luigi Giovannini, Andrè Clos

Department of Energy, Politecnico di Torino, Italy



11:24am - 11:27am

I-CUB: ‘Indoor Climate-Users-Buildings’: Relationship between measured and perceived indoor air quality in dwellings

Sarka Langer1, Theofanis Psomas2, Despoina Teli2

1: IVL Swedish Environmental Research Institute, Sweden; 2: Division of Building Services Engineering, Department of Architecture and Civil Engineering, Chalmers University of Technology, SE-412 96, Göteborg, Sweden



11:27am - 11:30am

Experimental Research of Metal-Organic Frameworks for Formaldehyde Dynamic Adsorption

Shan Chen, Kan Zu, Menghao Qin, Lei Fang

Department of Civil Engineering, Technical University of Denmark, Lyngby, 2800, Denmark



11:30am - 11:33am

Application of developed facade panel from recycled CDW: A case study

Marina Bagarić, Ivana Banjad Pečur, Bojan Milovanović

University of Zagreb, Faculty of Civil Engineering, Croatia



11:33am - 11:36am

A large field study of relationship between indoor and outdoor climate in residential buildings

Ricardo Forgiarini Rupp1, Gianluca Trotta2, Jørn Toftum1, Rune Korsholm Andersen1

1: International Centre for Indoor Environment and Energy, Department of Civil Engineering, Technical University of Denmark; 2: Department of the Built Environment, The Faculty of Engineering and Science, Aalborg University Copenhagen

Poster introductions 15: Building envelope
Location: Room 3 - Room 013, Building: 116
Chair: Prof. Staf Roels, KU Leuven
 
11:15am - 11:18am

Facade Design Process to Establish and Achieve Net Zero Carbon Building Targets

Andrea Zani, Teni Ladipo, Tania Cortes, Matthew Tee, Carmelo Galante

Eckersley O'Callaghan



11:18am - 11:21am

Microclimate measurements in ventilated air gaps – instrumentation and first result

Petra Rüther, Lars Gullbrekken, Odne Oksavik, Alessandro Nocente

SINTEF, Norway



11:21am - 11:24am

Fire safety evaluation of different internal insulation measures in Danish and European context

Nickolaj Feldt Jensen1,2, Martin Morelli1, Lars Schiøtt Sørensen2

1: Aalborg University, Department of the Built Environment, Denmark; 2: Technical University of Denmark, Department of Civil Engineering, Denmark



11:24am - 11:27am

Thermal performance of roof assemblies for developing countries in tropical climate

Petr Čanda, Pavel Kopecký

Czech Technical University in Prague, Czech Republic



11:27am - 11:30am

Trent Brick Panel: innovative envelope system designed according latest UK national fire and energy performance regulations

Emanuele Calabrò1,2, Fabio Peron2, Forrest Meggers3

1: Midgard Design Services Ltd (JRL Group), United Kingdom; 2: IUAV University of Venice, Scuola di Dottorato in Architettura, Città e Design, Venice, Italy; 3: Princeton University, School of Architecture, Princeton, New Jersey, US

Poster introductions 04: Innovative building materials
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Umberto Berardi, Ryerson University
 
11:15am - 11:18am

Influence of production on hemp concrete hygrothermal properties: sorption, water vapor permeability and water absorption

Aime Ruus1, Tarmo Koosapoeg1, Markus Pau2, Targo Kalamees3, Mattias Põldaru3

1: Tartu College, School of Engineering, Tallinn University of Technology, Estonia; 2: Viljandi Culture Academy, University of Tartu, Estonia; 3: Department of Civil Engineering and Architecture, School of Engineering,Tallinn University of Technology, Estonia



11:18am - 11:21am

The hygrothermal assessment of cement-ash-based mortar

Barbora Krejcirikova1, Carsten Rode1, Pawel Wargocki1, Jakub Kolarik1, Ruut Peuhkuri2

1: Technical University of Denmark, Denmark; 2: Aalborg University, Denmark



11:21am - 11:24am

Assessment of moisture and mould of hempcrete and straw panels

Jane Raamets1, Laura Lokko1, Aime Ruus1, Targo Kalamees2, Karin Muoni1

1: Tallinn University of Technology, School of Engineering, Tartu College, Estonia; 2: Tallinn University of Technology, School of Engineering, Department of Civil Engineering and Architecture, Estonia



11:24am - 11:27am

Thermo-optical reaction changes of PCM filled glass systems

Terézia Cabanová1, Michal Kuruc1, Jakub Čurpek1,2, Daniel Urbán1, Miroslav Čekon1,2

1: Slovak University of Technology, Slovak Republic; 2: Brno University of Technology, Czech Republic



11:27am - 11:30am

Development of High Performance Aerogel Concrete (HPAC) and statistical evaluation of compressive strength for practical use in construction

Silvia Fickler, Torsten Welsch, Martina Schnellenbach-Held

Institute for Structural Concrete, University Duisburg-Essen, Germany



11:30am - 11:33am

Hygrothermal performance of hemp lime concrete embedded with phase change materials for buildings

Arielle Melissa OMEME ADA1, Anh Dung TRAN LE1, Hachmi TOIFANE2, Pierre TITTELEIN2, Laurent ZALEWSKI2, Emmanuel ANTCZAK2, Omar DOUZANE1, Thierry LANGLET1

1: LTI, EA 3899 – Université de Picardie Jules Verne, IUT Amiens, Avenue des Facultés – Le Bailly, 80025 Amiens Cedex 1, France; 2: Univ. Artois, EA 4515, Laboratoire de Génie Civil et géo-Environnement, F-62400 Béthune, France



11:33am - 11:36am

Hygrothermal Performance of the Building Envelope with Low Environmental Impact: Case of a Hemp Concrete Envelope

AGUERATA KABORE1, MAREF WAHID2, CLAUDIANE OUELLET-PLAMONDON3

1: École de Technologie Supérieure (ÉTS), Canada; 2: École de Technologie Supérieure (ÉTS), Canada; 3: École de Technologie Supérieure (ÉTS), Canada

Poster introductions 16: CFD simulations, machine learning
Location: Room 5 - Room 019, Building: 116
Chair: Prof. Ryozo Ooka, The University Of Tokyo
 
11:18am - 11:21am

A review on coupled building physics analyses

Maximilian Bühler, Thomas Bednar

TU Vienna, Germany



11:21am - 11:24am

Selecting durable building envelope systems with machine learning assisted hygrothermal simulations database

Mikael Salonvaara, Emishaw Iffa, Philip Boudreaux, Andre Desjarlais, Simon Pallin, Antonio Aldykiewicz

Oak Ridge National Laboratory, United States of America



11:24am - 11:27am

A New Wall Function for Indoor Airflow with Buoyancy Effect

Bingqian Chen1, Qingyan Chen2, Junjie Liu1, Nan Jiang3

1: School of Environmental Science and Engineering, Tianjin University, Tianjin 300072, China; 2: School of Mechanical Engineering, Purdue University, West Lafayette, IN 47905, USA; 3: Department of Mechanics, School of Mechanical Engineering, Tianjin University, Tianjin 300072, China



11:27am - 11:30am

SELECTING EXTREME WEATHER FILE TO ASSESS OVERHEATING IN RESIDENTIAL BUILDING

Nicolas Lauzet1,2, Thibaut Colinart1, Marjorie Musy3, Karine Lapray2

1: Univ. Bretagne Sud, UMR CNRS 6027, IRDL, Lorient, France; 2: Tribu, Lyon, France; 3: Cerema, Equipe-Projet BPE, Nantes, France



11:30am - 11:33am

A multiple Linear Regression Model to predict indoor temperature trend in historic buildings for book conservation: the case study of “Sala del Dottorato” in Palazzo Murena, Italy.

Elisa Moretti1, Ettore Stamponi2, Maria Giulia Proietti2

1: Department of Engineering – University of Perugia, Via G. Duranti 93 (Perugia, Italia); 2: CIRIAF - Interuniversity Research Centre, University of Perugia, Via G. Duranti 63 (Perugia, Italia)

11:40am
-
12:00pm
Poster introductions 05: Heat and moisture transfer - numerical
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Targo Kalamees, Tallinn University of Technology
 
11:40am - 11:43am

Hygrothermal simulation on effective dehumidification methods in a museum storage room

Kazuki Ishikawa, Chiemi Iba, Daisuke Ogura, Shuichi Hokoi, Misao Yokoyama

Kyoto University, Japan



11:43am - 11:46am

Investigation of the transport properties for saline water in porous materials - Modeling of the permeability coefficient for saline water-

Kotaro Sakai1, Nobumitsu Takatori1, Daisuke Ogura1, Soichiro Wakiya2, Masaru Abuku3

1: Kyoto University, Japan; 2: Nara National Research Institute for Cultural Properties, Japan; 3: Kindai University, Japan



11:46am - 11:49am

A picture is worth 1000 words: Validation of radiant and convective heat transfer models of photonic membrane using non-invasive imaging of condensation pattern

Eric Teitelbaum1, Dorit Aviv2, Miamiao Hou2,3, Jiewei Li2, Adam Rysanek4, Forrest Meggers1

1: Princeton University, Princeton, NJ, United States; 2: University of Pennsylvania,Philadelphia, PA, United States of America; 3: Tongji University, Shanghai, China; 4: University of British Columbia, Vancouver, BC V6T 1Z4, Canada



11:49am - 11:52am

What affects the performance of POD for the simulation of (hygro)-thermal performance

Tianfeng Hou1,2,3,4, Staf Roels1, Hans Janssen1

1: KU Leuven, Department of Civil Engineering, Building Physics Section, 3001 Leuven, Belgium; 2: Data Assimilation Research Team, RIKEN Center for Computational Science, Kobe, Japan; 3: RIKEN Prediction Science Laboratory, Kobe, Japan; 4: RIKEN Interdisciplinary Theoretical and Mathematical Sciences Program, Kobe, Japan



11:52am - 11:55am

Hygrothermal simulations of timber-framed walls with air leakages

Anssi Laukkarinen, Teemu Jokela, Topi Moisio, Juha Vinha

Tampere University, Finland



11:55am - 11:58am

Transient numerical simulation of coupled heat and moisture transfer through wall-to-floor thermal bridges

Yucong XUE, Jian GE, Yifan FAN

College of Civil Engineering and Architecture, Zhejiang University, China, People's Republic of

Poster introductions 10: COVID-19 & infection risk
Location: Room 2 - Room 011, Building: 116
Chair: Dr. Marc Abadie, La Rochelle Université
 
11:40am - 11:43am

Correlating covid19 and indoor health: how the lockdown and the work-from-home trends are changing the hygrothermal profiles of our homes

Arianna Brambilla1, Alberto Sangiorgio2

1: The University of Sydney, Australia; 2: Grimshaw Architects, Sydney, Australia



11:43am - 11:46am

A simplified model to estimate COVID19 transport in enclosed spaces

Parham A Mirzaei1, Mohammad Moshfeghi2, Hamid Motamedi Zoka3, Yahya Sheikhnejad4, Hadi Bordbar5

1: The University of nottingham, United Kingdom; 2: Sogang University , South Korea; 3: Tarbiat Modares University, Iran; 4: University of Aveiro, Portugal; 5: Aalto University, Finland



11:46am - 11:49am

A monitoring system for evaluation of COVID-19 infection risk

Jevgenijs Telicko, Dagis Daniels Vidulejs, Andris Jakovičs

University of Latvia, Latvia

Poster introductions 20: Building envelope
Location: Room 3 - Room 013, Building: 116
Chair: Prof. Staf Roels, KU Leuven
 
11:40am - 11:43am

Thermal resistance of the ventilated air-spaces behind external claddings; theoretical definition and a parametric study

Mohammad Rahiminejad, Dolaana Khovalyg

École polytechnique fédérale de Lausanne, Switzerland



11:43am - 11:46am

Using Closed Cavity Façades (CCF) to enhance building thermal performance

Michalis Michael

University of Cambridge, United Kingdom



11:46am - 11:49am

Development of advanced multifunctional façade systems: Thermo-acoustic modelling and performance

Stefano Fantucci, Fabio Favoino, Elisa Fenoglio, Valentina Serra, Marco Perino, Louena Shtrepi, Marta Bivanti, Arianna Astolfi

Politecnico di Torino - Department of Energy

Poster introductions 09: LCA, sustainable development
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Umberto Berardi, Ryerson University
 
11:40am - 11:43am

Investigation of the Production and Utilization Phase using the Example of a Hotel regarding the Life Cycle Assessment

Manuela Walsdorf-Maul, Michael Schneider, Sarah Melanie Engel

HTW Berlin, Germany



11:43am - 11:46am

Investigation of Aspects of Building Certification according to BNB for the further Development of the current Energy Certificate using the Example of an Office Building

Manuela Walsdorf-Maul, Michael Schneider, Laura Dommack

HTW Berlin, Germany



11:46am - 11:49am

Tracing Hazardous Materials in Registered Records: A Case Study of Demolished and Renovated Buildings in Gothenburg

Pei-Yu Wu1,2, Kristina Mjörnell1,2, Mikael Mangold1, Claes Sandels1, Tim Johansson3

1: RISE Research Institutes of Sweden, Gothenburg, Sweden; 2: Department of Building and Environmental Technology, Lund University, Lund, Sweden; 3: Resources, Energy and Infrastructure, KTH, Stockholm Sweden



11:52am - 11:55am

Re-making the Energy Profile of (Irish) Market Towns, as if Science Matters.

Martin Murray

University of Ulster, Jordanstown, Ireland



11:55am - 11:58am

Comparison of the resource and energy demand as well as the comfort of a climate-adapted and a climate-unadapted office building

Anica Jasmin Mayer, Tobias Jürgens

Technical university of munich, Germany

Poster introductions 08: Acoustics
Location: Room 5 - Room 019, Building: 116
Chair: Prof. Ryozo Ooka, The University Of Tokyo
 
11:40am - 11:43am

An OpenBIM workflow to support collaboration between Acoustic Engineers and Architects

Tim Pat McGinley1, Thomas Vestergaard2, Cheol-Ho Jeong3, Finnur Kári Pind Jörgensson3

1: DTU Byg, Denmark; 2: Sweco, Denmark; 3: DTU Electro, Denmark



11:43am - 11:46am

The e-SAFE energy and seismic renovation solutions for the European building stock: main features and requirements

Gianpiero Evola1, Giuseppe Margani2, Vincenzo Costanzo2, Carola Tardo2, Edoardo Michele Marino2, Giovanni Semprini3, Roberto Tomasi4, Christian Halmdienst5, Bart Voortman6

1: Università degli Studi di Catania, Italy - DIEEI; 2: Università degli Studi di Catania, Italy - DICAR; 3: Alma Mater Studiorum - Università di Bologna; 4: Department of Civil Engineering, Norwegian University of Life Sciences (NMBU); 5: PINK GmbH; 6: WEBO



11:46am - 11:49am

Binaural Speech Intelligibility in a real elementary classroom.

Greta Minelli1, Giuseppina Puglisi1, Arianna Astolfi1, Christopher Haut2, Anna Warzybok2

1: Politecnico di Torino, Italy; 2: Carl von Ossietzky Universität Oldenburg

12:00pm
-
1:00pm
Lunch break I
1:00pm
-
1:30pm
Poster exhibition and Q&A 01: Moisture in building structures
Location: Room 1 - Room 082, Building: 116
Poster exhibition and Q&A 02: IEQ & pollutants
Location: Room 2 - Room 011, Building: 116
Poster exhibition and Q&A15: Building envelope
Location: Room 3 - Room 013, Building: 116
Poster exhibition and Q&A 04: Innovative building materials
Location: Room 4 - Room 015, Building: 116
Poster exhibition and Q&A 16: CFD simulations, machine learning
Location: Room 5 - Room 019, Building: 116
1:30pm
-
2:00pm
Poster exhibition and Q&A 05: Heat and moisture transfer - numerical
Location: Room 1 - Room 082, Building: 116
Poster exhibition and Q&A 10: COVID-19 & infection risk
Location: Room 2 - Room 011, Building: 116
Poster exhibition and Q&A 20: Building envelope
Location: Room 3 - Room 013, Building: 116
Poster exhibition and Q&A 09: LCA, sustainable development
Location: Room 4 - Room 015, Building: 116
Poster exhibition and Q&A 08: Acoustics
Location: Room 5 - Room 019, Building: 116
2:00pm
-
3:30pm
Session 06: Moisture transfer in wooden structures
Location: Room 1 - Room 082, Building: 116
Chair: Dr. Berit Time, SINTEF
 
2:00pm - 2:15pm

Pitched unventilated wood frame roof with smart vapour barrier – field measurements

Nora Schjøth Bunkholt1, Lars Gullbrekken1, Berit Time1, Tore Kvande2

1: SINTEF, Norway; 2: NTNU, Norway



2:15pm - 2:30pm

Impact of the 3D Morphology on the Hygric Transfer of Hygroscopic Materials : Application to Spruce Wood

Hiam DAHANNI1,2, Aya RIMA1, Kamilia ABAHRI1, Chady EL HACHEM3, Hassan ASSOUM4

1: ENS Paris Saclay, France; 2: Lebanese University, Lebanon; 3: Cnam Liban; 4: Beirut Arab University, Lebanon



2:30pm - 2:45pm

Water vapour permeability of wood – remarks on cup method procedure and measured data of spruce wood

Jan Richter, Kamil Staněk

UCEEB, CTU in Prague, Czech Republic



2:45pm - 3:00pm

Sensitivity analysis of hygrothermal performance of wood framed wall assembly under different climatic conditions: the impact of cladding properties

Chetan Aggarwal1, Lin Wang2, Maurice Defo2, Hua Ge1, Max Junginger1, Michael A. Lacasse2

1: Concordia University, Montreal, Quebec, Canada; 2: Construction Research Centre, NRCC, Ottawa, Ontario, Canada



3:00pm - 3:15pm

Identifying the critical orientation of wood-frame walls in assessing moisture risks using hygrothermal simulation

Chetan Aggarwal1, Maurice Defo2, Hua Ge1, Michael A. Lacasse2

1: Concordia University, Montreal, Quebec, Canada; 2: Construction Research Centre, NRCC, Ottawa, Ontario, Canada



3:15pm - 3:30pm

Moisture-induced deformations of wood and shape memory

Chi Zhang1, Dominique Derome2, Jan Carmeliet1

1: ETH Zurich, Switzerland; 2: Universite de Sherbrooke, Qc, Canada

Session 11: Covid-19 & indoor environment
Location: Room 2 - Room 011, Building: 116
Chair: Prof. Jarek Kurnitski, Tallinn University of Technology
 
2:00pm - 2:15pm

The effect of air conditioning outlets on the spread of respiratory disease in Mosque’s environment

Hayder Murad Khan, Saleh Al Saadi

Sultan Qaboos University, Oman



2:15pm - 2:30pm

A systematic approach to estimating the effectiveness of multi-scale IAQ strategies for reducing the risk of airborne infection of SARS-CoV-2

Jialei Shen1, Meng Kong1, Bing Dong1, Jianshun Zhang1,2

1: Syracuse University; 2: Nanjing University



2:30pm - 2:45pm

Numerical Model for Prediction of Indoor COVID-19 Infection Risk Based on Sensor Data

Janis Virbulis, Maija Sjomkane, Maksims Surovovs, Andris Jakovics

University of Latvia, Latvia



2:45pm - 3:00pm

Digital twins of building physics experimental laboratory setups for effective E-learning during pandemic lockdown

Hicham Johra, Ekaterina Aleksandrova Petrova, Lasse Rohde, Michal Zbigniew Pomianowski

Aalborg University, Department of the Built Environment, Denmark

Session 10: Building envelope optimization
Location: Room 3 - Room 013, Building: 116
Chair: Prof. Juha Olavi Vinha, Tampere University
 
2:00pm - 2:15pm

Simplified infinite fin method to model slab edges

Mehdi Ghobadi, Alex Hayes, Travis Moore

National Research Council Canada, Canada



2:15pm - 2:30pm

Air preheating potential with high Opaque Ventilated Façade under natural and forced convection

Thibaut Colinart, Maxime Batard, Hervé Noël, Adrien Fuentes, Patrick Glouannec

Univ. Bretagne Sud, UMR CNRS 6027, IRDL, Lorient, France



2:30pm - 2:45pm

Multifunctional climate-responsive façades coupled with different ventilation modes

Shahrzad Soudian, Umberto Berardi

Ryerson University, Toronto, Canada



2:45pm - 3:00pm

The effect of temperature, humidity and mechanical properties on crack formation on external thin plasters of ETICS

Kristina Volkova1, Mattias Põldaru1, Simo Ilomets1, Targo Kalamees1,2, Martin Talvik1, Dariusz Heim3

1: Tallinn University of Technology, Estonia; 2: Smart City Center of Excellence (Finest Twins), Tallinn University of Technology, Ehitajate tee 5, Tallinn, Estonia; 3: Łodz University of Technology, Department of Environmental Engineering, ul. Wolczanska 213, 90924 Łodz, Poland



3:00pm - 3:15pm

Status assessment of buildings using existing data and identifying gaps in data from performance indicators

Jan Mandinec, Pär Johansson

Chalmers University of Technology, Sweden



3:15pm - 3:30pm

Calibration of DSF model for real-time control

Giovanni Gennaro1,2, Francesco Goia3, Giuseppe De Michele2, Marco Perino1, Fabio Favoino1

1: Politecnico di Torino, Italy; 2: EURAC Research, Italy; 3: Norwegian University of Science and Technology, NTNU, Norway

Session 08: Thermal performance & Insulation
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Miimu Airaksinen, RIL Finnish Association of Civil Engineers
 
2:00pm - 2:15pm

Static and dynamic thermal characterization of exterior walls with mineral foam insulation using a Guarded Hot Box apparatus

Edouard Gengembre, Karine Jacquemet

LafargeHolcim Innovation Center



2:15pm - 2:30pm

Thermal Conductivity of Insulation materials at Different Temperatures

Youness Yousefi, Fitsum Tariku

BCIT, Canada



2:30pm - 2:45pm

Component sequence and thermal mass effects on the transient thermal performance of concrete walls

Benyamin Salehpour1, Mehdi Ghobadi2, Travis Moore2, Hua Ge1

1: Concordia University, Canada; 2: National Research Council Canada



2:45pm - 3:00pm

Energy performance analysis of smart wall system with switchable insulation and thermal storage capacity

Emishaw Iffa, Mikael Salonvaara, Diana Hun

Oak Ridge National Laboratory, United States of America



3:00pm - 3:15pm

Evaluation of the intrinsic thermal performance of an envelope in the summer period

Arnaud JAY1, Hafsa FARES3, Simon THEBAULT2, Pierre OBERLE3, Joceyn ANGER1

1: Univ Grenoble Alpes, CEA, LITEN, INES, 73370 LE BOURGET DU LAC, France; 2: CSTB, France; 3: INES PFE, France

Session 09: Ventilation, heat transfer and CFD
Location: Room 5 - Room 019, Building: 116
Chair: Dr. Parham A Mirzaei, The University of nottingham
 
2:00pm - 2:15pm

CFD INVESTIGATION OF NATURAL VENTILATION IN A TYPICAL FAMILY HOUSE IN HUNGARY

Modar Ali1,2, Ádám László Katona1,2, István Kistelegdi1,3

1: Energia Design Building Technology Research Group, Szentágothai Research Centre, H-7624 Pécs, Hungary; 2: Breuer Marcel Doctoral School, Faculty of Engineering and Information Technology, University of Pécs, H-7624 Pécs, Hungary; 3: Department of Building Structures and Energy Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, H-7624 Pécs, Hungary



2:15pm - 2:30pm

On-site measurement and numerical investigation of thermal environment with different air distribution systems in ice arenas

Wenyu Lin, Tao Zhang, Xiaohua Liu, Lingshan Li

Department of Building Science, Tsinghua University, Beijing, China



2:30pm - 2:45pm

A simplified model for calculating heat transfer through the double skin facade

Guoqing He1,2, Yuan Meng1, Jiayi Zhu1, Sanming Zhang1

1: College of civil engineering and architecture, Zhejiang University, China; 2: Center for Balance Architecture, Zhejiang University, China



2:45pm - 3:00pm

Evaluation and Use of Airspaces for Thermal Resistance in Buildings

Hamed H. Saber1, David W. Yarbrough2

1: Prince Saud Bin Thuniyan Research Center, Royal Commission of Jubail and Yanbu, Saudi Arabia; 2: R&D Services, Inc., Watertown, TN, USA



3:00pm - 3:15pm

Numerical And Experimental Study Of A Supply Air Wall Based On Integrated Insulation Clay Hollow Blocks

Jean-Baptiste BOUVENOT, Matthieu EGG

INSA Strasbourg/ICube Laboratory, France

3:30pm
-
4:00pm
Coffee break II
4:00pm
-
5:30pm
Session 13: Hygrothermal assessment building components
Location: Room 1 - Room 082, Building: 116
Chair: Fitsum Tariku, British Colubia University of Technology
 
4:00pm - 4:15pm

Hygrothermal Monitoring of Two Pilot Prefabricated Exterior Energy Retrofit Panel Designs

Brock Conley1, Mark Carver2, Sebastien Brideau2

1: Mechanical and Aerospace Engineering, Carleton University, Ottawa, Canada; 2: CanmetENERGY-Natural Resources Canada, Ottawa, Canada



4:15pm - 4:30pm

Sensor specifications for in-situ measurement of the temperature distribution inside the wall material for evaluating thermal performance of residential buildings

Tatsuo Nagai, Jin Eto

Tokyo University of Science



4:30pm - 4:45pm

Determination of the anisotropic thermal conductivity of an aerogel-based plaster using transient plane source method

Ali Naman Karim, Bijan Adl-Zarrabi, Pär Johansson, Angela Sasic Kalagasidis

Chalmers University of Technology, Sweden



4:45pm - 5:00pm

Hygrothermal performance assessment of split insulated cork wall assemblies under various moisture load conditions

Tigran Ghazaryan, Fitsum Tariku

British Columbia Institute of Technology, Canada



5:00pm - 5:15pm

Probabilistic assessment of timber frame wall compositions using a convolutional neural network

Astrid Tijskens, Staf Roels, Hans Janssen

University of Leuven, Belgium

Session 12: Wind driven rain, ice and frost
Location: Room 2 - Room 011, Building: 116
Chair: Prof. Jan Carmeliet, ETH Zurich
 
4:00pm - 4:15pm

Stochastic simulation of rain intrusion through small defects due to water rivulet overpressure. Introducing a driving rain leakage potential.

Carl-Eric Hagentoft1, Lars Olsson2

1: Chalmers University, Sweden; 2: RISE Research Institutes of Sweden



4:15pm - 4:30pm

Characterising the effects of wind-driven rain on the thermophysical performance of cavity walls by means of a Bayesian framework

Virginia Gori1, Valentina Marincioni2,3, Hector Altamirano-Medina2,3

1: UCL Energy Institute, University College London, United Kingdom; 2: UCL Institute for Environmental Design and Engineering, University College London, United Kingdom; 3: UK Centre for Moisture in Buildings, United Kingdom



4:30pm - 4:45pm

Impact of climate change on the wind-driven rain exposure of a historical building

John Bourcet1, Aytac Kubilay1, Dominique Derome2, Jan Carmeliet1

1: ETH Zurich, Switzerland; 2: Université de Sherbrooke, Canada



4:45pm - 5:00pm

Effects of anisotropy of properties of fired clay materials on strain evolution and results of coupled hygrothermal and mechanical simulations during freezing and thawing

Kazuma Fukui, Chiemi Iba, Daisuke Ogura

Kyoto University, Japan



5:00pm - 5:15pm

Fundamental Study on the Thermodynamic Non-Equilibrium Freezing Probability Prediction Model Taking into Account the Super Cooling Phenomena in Porous Material

Yoshihiko Kishimoto

Osaka City University, Japan

Session 07: Impact of climate & Adaptation
Location: Room 3 - Room 013, Building: 116
Chair: Dr. Michael Lacasse, National Research Council Canada
 
4:00pm - 4:15pm

The impact of climate change on heritage located in Iran (Ghiasieh school)

Hamed Hedayatnia, Marijke Steeman, Nathan Van Den Bossche

Ghent University, Belgium



4:15pm - 4:30pm

Effects of climate change on the moisture performance and durability of brick veneer walls on frame construction in Canada

MAURICE DEFO, Lacasse Michael, Lin Wang

National Research Council, Canada



4:30pm - 4:45pm

Influence of climate change on the energy performance assessment of NZEB houses

Arnold Janssens, Elisa Vandenbussche, Kjartan Van den Brande, Wolf Bracke, Marc Delghust

Ghent University UGent, Belgium



4:45pm - 5:00pm

A climate-based moisture index approach for hygrothermal analysis in Australia

Haniya Javed1, Arianna Brambilla1, Marcus Strang2

1: The University of Sydney, Australia; 2: The University of Queensland, Australia



5:00pm - 5:15pm

Thermal performance of a novel lightweight emergency construction system in different climates

Marco D'Orazio, Gianluca Maracchini

Università Politecnica delle Marche, Italy



5:15pm - 5:30pm

A multi-year comparative analysis of green and conventional roof thermal performance under temperate climate conditions

Peter Gunn, H. Burak Gunay, Paul J. Van Geel

Carleton University, Canada

Session 15: RES (Renewable energy systems)
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Dariusz Gawin, Lodz University of Technology
 
4:00pm - 4:15pm

A bi-directional approach to building-integrated PV systems configuration

Ardeshir Mahdavi, dawid wolosiuk, Christiane Berger

Department of Building Physics and Building Ecology, TU Wien, Austria



4:15pm - 4:30pm

Numerical assessment of self-sufficiency of residential buildings in Belgium by using heat pumps, photovoltaic panels and energy storages

Katarina Simic, Klaas Thiers, Hugo Monteyne, Jan Desmet, Michel De Paepe

Ghent University, Belgium



4:30pm - 4:45pm

Thermal performance of ETICS, energy activated with PCM and PV

Martin Talvik1, Simo Ilomets1, Targo Kalamees1, Paul Klõšeiko1, Dariusz Heim2, Anna Wieprzkowicz2, Dominika Knera2

1: Tallinn University of Technology, Estonia; 2: Lodz University of Technology, Poland



4:45pm - 5:00pm

Energy demand for roof mounted heating snow load mitigation systems.

Thomas Thiis1, Iver Frimannslund1, Louise Viketun Skjøndal1, Thomas Marke2

1: Norwegian University of Life Science, Norway; 2: University of Innsbruck, Austria



5:00pm - 5:15pm

System-Scale Modeling of a Building Envelope-Integrated, Transparent Concentrating Photovoltaic and Thermal Collector

Nick Novelli1, Justin Shultz2, Mohamed Aly Etman1, Kenton Phillips3, Melanie M Derby4, Peter R H Stark5, Michael Jensen6, Anna Dyson1

1: Yale University, New Haven, CT, USA; 2: EYP, Washington DC, USA; 3: Buro Happold, New York, NY, USA; 4: Kansas State University, Manhattan, KS, USA; 5: Harvard University, Cambridge, MA, USA; 6: Rensselaer Polytechnic Institute, Troy, NY, USA

Session 14: Building acoustics and noise control
Location: Room 5 - Room 019, Building: 116
Chair: Birgit Rasmussen, Aalborg University Copenhagen, BUILD
 
4:00pm - 4:15pm

On the Low Frequency Impact Noise Measurement in Residential Buildings

Daniel Urbán1, Peter Zaťko2

1: Slovak University of Technology in Bratislava, Faculty of Civil Engineering, Department of Materials Engineering and Physics, Radlinského 11, 810 05 Bratislava, Slovakia; 2: A&Z Acoustics s.r.o., Víťazná12, 831 06 Bratislava, Slovakia



4:15pm - 4:30pm

Acoustic design and optimization of an organic architecture, a cross disciplinary design of an open-space airport case study.

Francesco Carlucci1,2, Walter Tiano2

1: Department of Civil, Environmental, Land, Building Engineering and Chemistry, Polytechnic University of Bari, 70125 Bari, Italy; 2: Deerns Italia S.P.A., 20149 Milan, Italy



4:30pm - 4:45pm

Airborne sound insulation of single-leaf partitions under hygric load

Marcus Hermes

Fraunhofer IBP Stuttgart, Germany



4:45pm - 5:00pm

Effect of competitive acoustic environments on speech intelligibility

Giuseppina Emma Puglisi1, Anna Warzybok2, Arianna Astolfi1, Birger Kollmeier2

1: Politecnico di Torino, Italy; 2: Carl von Ossietzky Universität and Cluster of Excellence Hearing4All, Oldenburg, Germany



5:00pm - 5:15pm

The influence of suspended ceilings on the impact sound insulation of wooden-beamed ceilings in a Wilhelminian style house

Maximilian Neusser1, Paul Wegerer2, Thomas Bednar1

1: Technische Universität Wien, Austria; 2: Gassner & Partner Baumanagement GmbH, Austria

7:00pm
-
9:00pm
Voluntary dinner: Meyers Spisehus, Handelstorvet 10, 2800 Kongens Lyngby
See location on map.
Date: Thursday, 26/Aug/2021
8:30am
-
10:00am
Plenary session II: How the COVID-19 pandemic will reshape the built environment
Location: Auditorium - Room 082, Building: 116
Chair: Dr. Pawel Wargocki, Technical University of Denmark
Keynote speaker: Professor, Associate Dean Xudong Yang, Tsinghua University, China
Keynote speaker: Dr. Andrew K. Persily, Chief of the Energy and Environment Division, U.S. National Institute of Standards and Technology (NIST), USA
Moderator: Associate Professor Pawel Wargocki, Technical University of Denmark
10:00am
-
10:30am
Coffee break III
10:30am
-
11:15am
Session 17: Hygroscopic materials
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Hans Janssen, KU Leuven
 
10:30am - 10:45am

Drying of porous materials at pore scale using lattice Boltzmann and pore network models

Jianlin Zhao2, Feifei Qin2, Dominique Derome1, Jan Carmeliet2

1: Universite de Sherbrooke, Canada; 2: ETH Zurich, Switzerland



10:45am - 11:00am

Experimental and numerical study of non-isothermal hygroscopic behavior of spruce during adsorption and desorption

Xiaohai Zhou1,2, Guylaine Desmarais1, Dominique Derome3, Jan Carmeliet1

1: ETH Zurich, Switzerland; 2: Laboratory of Multiscale Studies in Building Physics, Empa, Dübendorf, Switzerland; 3: Université de Sherbrooke, Sherbrooke, Canada



11:00am - 11:15am

Recent progress on hygroscopic materials for indoor moisture buffering

Xu Zhang1,2, Menghao Qin1, Kan Zu1

1: Technical University of Denmark; 2: Hebei GEO Universit

Session 03: Thermal comfort & physiological models
Location: Room 2 - Room 011, Building: 116
Chair: Dr. Jiyun Song, University of Hong Kong
 
10:30am - 10:45am

Evaluation and improvement of two-node bioheat model for young subjects

Lili Ji1, Abdelaziz Laouadi2, Chang Shu1, Liangzhu Wang1, Michael Lacasse2

1: Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, Canada; 2: Construction Research Centre, National Research Council Canada, Ottawa, Canada



10:45am - 11:00am

Improving the energy efficiency of an office building by applying a thermal comfort model

Gratien Jesugo Dieudonné Kiki1,2, Philippe André1, Aristide Houngan2, Clément Kouchadé2

1: Building Energy Monitoring and Simulation, Liege University, 6700 Arlon, Belgium; 2: Laboratoire d’Energétique et de Mécanique Appliquée, University of Abomey-Calavi, 01 BP 2009 Cotonou, Bénin



11:00am - 11:15am

An Event-Triggered Model Predictive Control for Energy Efficiency and Thermal Comfort Optimization in Buildings

Shiyu Yang, Wanyu Chen, Man Pun Wan

Nanyang Technological University, Singapore

Session 18: Daylight & Visual comfort
Location: Room 3 - Room 013, Building: 116
Chair: Gregers Reimann, IEN Consultants Sdn Bhd
 
10:30am - 10:45am

Visual performance of home offices: a case study

Ceren Sarikaya, Christiane Berger, Ulrich Pont, Ardeshir Mahdavi

Department of Building Physics and Building Ecology, TU Wien, Austria



10:45am - 11:00am

Determining A Proper Daylighting Design Solution for Visual Comfort and Lighting Energy Efficiency: A Case Study for High-Rise Residential Building

Zehra Aybike Kılıç, Alpin Köknel Yener

Istanbul Technical University, Turkey



11:00am - 11:15am

Low-cost smart solutions for daylight and electric lighting integration in historical buildings

Michelangelo Scorpio1, Giovanni Ciampi1, Niko Gentile2, Sergio Sibilio1

1: Department of Architecture and Industrial Design, University of Campania "Luigi Vanvitelli"; 2: Department of Architecture and Built Environment, Faculty of Engineering, Lund University

Session 16: Cold & Arctic climate
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Eva B Møller, Technical University of Denmark
 
10:30am - 10:45am

Can collected hygrothermal data illustrate observed problems of the façade? – A case study from Greenland

Naja Kastrup Friis, Eva B. Møller, Tove Lading

DTU, Denmark



10:45am - 11:00am

Moisture related challenges in the Greenlandic building sector – results from a survey

Ernst Jan de Place Hansen

Aalborg University, Denmark



11:00am - 11:15am

Weather and indoor climate in Greenland

Eva B Møller1, Jonas Helgason2

1: Technical University of Denmark, Denmark; 2: Inuplan, Greenland

Session 19: Energy flexibility & Demand side management
Location: Room 5 - Room 019, Building: 116
Chair: Dr. Rongling Li, DTU Byg
 
10:30am - 10:45am

Empowering energy flexibility and climate resilience using collective intelligence based demand side management (CI-DSM)

Vahid M. Nik1, Amin Moazami2

1: Lund University, Sweden; 2: NTNU, Norway



10:45am - 11:00am

Towards net-zero carbon performance: using demand side management and a low carbon grid to reduce operational carbon emissions in a UK public office

Esfand Burman1, Manuel de-Borja-Torrejón2, Nishesh Jain1

1: University College London, United Kingdom; 2: Technical University of Munich, Germany



11:00am - 11:15am

DEMAND SIDE FLEXIBILITY POTENTIAL AND COMFORT PERFORMANCE OF NON-RESIDENTIAL BUILDINGS

Georgios Chantzis1, Panagiota Antoniadou1, Maria Symeonidou1, Effrosyni Giama1, Simeon Oxizidis1, Dionysia Kolokotsa2, Agis M. Papadopoulos1

1: Process Engineering Design Laboratory, School of Mechanical Engineering, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece; 2: Laboratory of Energy Management in the Built Environment, School of Environmental Engineering, Technical University of Crete, 73100 Chania, Greece

11:15am
-
11:35am
Poster introductions 12: Heat and moisture transfer - experimental
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Hans Janssen, KU Leuven
 
11:15am - 11:18am

Thermal insulation of autoclaved materials

Jerzy Zbigniew Piotrowski, Anna Stepien

Kielce University of Technology, Poland



11:18am - 11:21am

Experimental study of hygrothermal conditions in a wooden room for numerical comparisons

Clemence Legros1,2, Amandine Piot1, Monika Woloszyn2, Mickael Pailha2

1: University of Grenoble Alps, CEA, LITEN, INES, Grenoble, France; 2: University of Savoie Mont Blanc, CNRS, LOCIE, Chambéry, France



11:21am - 11:24am

Laboratory observation of interior surface heat transfer at balcony door

Jan Tywoniak, Kamil Staněk, Martin Kny, Daniel Adamovsky

Czech Technical University in Prague, Czech Republic



11:24am - 11:27am

Optimal Density for Balancing the Thermal Conductivity and Compressive Strength of Foamed Ceramic

Yue Lei1, Xing Zheng1, Mei Dou2, Lihong Zheng2, Mingfang Tang1, Chi Feng1

1: School of Architecture and Urban Planning, Chongqing University, Chongqing, PR China; 2: China Southwest Architectural Design and Research Institute Corp. Ltd, Chengdu , Sichuan, PR China



11:27am - 11:30am

The effect of rising damp on heat transfer performance and energy consumption of two kinds of Chinese blue-brick masonry walls

Zhen-yi Kong1, Hua-rong Xie1, Yi-ke Cai1, Xue Tan1, Shuichi Hokoi1, Yong-hui Li1,2

1: School of Architecture, Southeast University; 2: Key Laboratory of Urban and Architectural Heritage Conservation of Ministry of Education (Southeast University)

Poster introductions 03: Thermal comfort
Location: Room 2 - Room 011, Building: 116
Chair: Dr. Jiyun Song, University of Hong Kong
 
11:15am - 11:18am

Analysis of Draught Discomfort Prediction Models

Seyed Mohammad Hooshmand1, Seyed Alireza Zolfaghari1, Jørn Toftum2

1: University of Birjand, Iran; 2: Technical University of Denmark



11:18am - 11:21am

Thermal comfort environment for migrants: a long-term follow-up climate chamber experiment

Yu Dong1,2, Yuan Shi3, Yanfeng Liu2, Jørn Toftum1

1: Technical University of Denmark, Denmark; 2: Xi’an University of Architecture and Technology, China; 3: China Mobile Group Design Institute Co., Ltd, China



11:21am - 11:24am

Prediction of indoor air temperature for assessment of thermal stress

Jørn Toftum1, Jose Joaquin Aguilera Prado1, Boris Kingma2, Hein Daanen3, Chuansi Gao4, Lars Nybo2

1: Technical University of Denmark, Denmark; 2: University of Copenhagen, Denmark; 3: Vrije Universiteit Amsterdam, Netherlands; 4: Lund University, Sweden



11:24am - 11:27am

The Role of Complex Airflow Simulation Tools for Overheating Assessment of Passive Houses

Vitor Leite Goncalves, Tarek Rakha

School of Architecture, Georgia Institute of Technology, Atlanta, GA, USA



11:27am - 11:30am

Improving thermal comfort conditions in K-12 educational buildings in hot and humid climate: a case study in Cucuta, Colombia.

Diana Carolina Guerrero, Hua Ge, Bruno Lee

Concordia University, Canada

Poster introductions 13: Daylight, windows, glazing and shading
Location: Room 3 - Room 013, Building: 116
Chair: Gregers Reimann, IEN Consultants Sdn Bhd
 
11:15am - 11:18am

Comparative field tests of an electrochromic shading device - thermal and visual comfort

Alessandro Nocente, Odne Oksavik, Lars Gullbrekken, Steinar Grynning

Sintef AS, Norway



11:18am - 11:21am

Analyzing Solar Light Effects on Indoor Thermal Comfort in Near-Window Zones

Nan Wang, Julian Wang

Department of Architectural Engineering, The Pennsylvania State University, United States of America



11:21am - 11:24am

Evaluation of methods for determining thermal properties of window systems

Barbara Pietruszka, Jaroslaw Awksientjuk, Arkadiusz Witek

Instytut Techniki Budowlanej / Building Research Institut, Poland



11:24am - 11:27am

Evaluation of the performance of glazed balconies based on temperature monitoring

Magdalena Maria Grudzińska

Lublin University of Technology, Poland



11:27am - 11:30am

Experiences using EN 17037 in evaluation of daylighting of dwellings in Slovakia

Jakub Curpek, Jozef Hraska

Slovak University of Technology, Faculty of Civil Engineering, Radlinskeho 11, 810 05, Bratislava, Slovakia



11:30am - 11:33am

In situ Ug-value measurement on three different glazing types

Franz Paschke, Nadja Bishara, Isabell Schulz, Cenk Kocer, Jens Schneider, Andreas Maier

Technical University of Darmstadt, Germany

Poster introductions 11: Extreme climate & climate adaptation
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Eva B Møller, Technical University of Denmark
 
11:15am - 11:18am

Building Integrated Photovoltaic/Thermal Collector for Arctic Residential Applications

Daniel J Baril, Andreas K Athienitis, Hua Ge

Concordia University, Canada



11:18am - 11:21am

Preliminary assessment of the building design of a new test house in Nuuk, Greenland

Eva B Møller, Tove Lading

Technical University of Denmark, Denmark



11:21am - 11:24am

Hygrothermal performance of a massive stone wall insulated from the inside with hemp concrete – field measurements in cold climate

Markus Pau1, Targo Kalamees2,3, Urve Kallavus4

1: Viljandi Culture Academy, University of Tartu, Estonia; 2: Smart City Center of Excellence (Finest Twins), Tallinn University of Technology, Estonia; 3: nZEB Research Group, Tallinn University of Technology, Estonia; 4: Tallinn University of Technology, Department of Mechanical and Industrial Engineering, Ehitajate tee 5, Tallinn, Estonia



11:24am - 11:27am

Assessing the climate change adaptation of building energy saving strategies over four European citiesclimate zones

Yuchen Yang1, Vahid Nik1,2,3

1: Lund University, Sweden; 2: Chalmers University of Technology; 3: Queensland University of Technology (QUT)



11:27am - 11:30am

Dependence of measured specific air leakage rate (qE50) on envelope pressure measurement position: a case study in an apartment building in winter conditions

Paul Klõšeiko1, Endrik Arumägi2, Jaanus Hallik2, Targo Kalamees2

1: Tallinn University of Technology, Estonia; 2: Smart City Center of Excellence (Finest Twins), Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn, Estonia



11:30am - 11:33am

Utilization of Climate Files Predicting Future Weather in Dynamic Building Performance Simulation – A Review

Christian Nicolai Nielsen, Jakub Kolarik

Technical University of Denmark

Poster introductions 14: Energy consumption & optimization
Location: Room 5 - Room 019, Building: 116
Chair: Dr. Rongling Li, DTU Byg
 
11:15am - 11:18am

Energy use of buildings in relation to occupancy patterns

Henrik Davidsson1, Kowshik Chowdary Sunkavalli1, Niko Gentile1, Björn Berggren1,2, Jouri Kanters1

1: Lund University, Sweden; 2: Skanska Sverige AB, Sweden



11:18am - 11:21am

Community cooling infrastructure from waste heat among diverse building types in Rourkela Steel Township, India

Roshmi Sen1, Forrest Meggers2, Eric Teitelbaum3

1: NIT Rourkela, India; 2: Princeton University, School of Architecture & the Andlinger Center for Energy and the Environment, Princeton, New Jersey, 08544, USA; 3: AIL Research and Princeton University, Andlinger Center for Energy and the Environment, Princeton, New Jersey, 08544, USA



11:21am - 11:24am

Statistical analyses of the energy demand and thermal comfort for multiple uncertain input parameters performed using transformed variable and perturbation method.

Marcin Koniorczyk, Witold Grymin, Marcin Zygmunt, Dariusz Gawin

Lodz University of Technology, Poland



11:24am - 11:27am

Primary energy efficiency assessment of a coil heat recovery system within the air handling unit of an operating room

Francisco Javier Rey-Martínez, Julio F. San José-Alonso, Eloy Velasco-Gómez, Ana Tejero-González, Paula M. Esquivias

Universidad de Valladolid, Spain



11:27am - 11:30am

Develop a New Approach to Evaluate Energy Savings, Thermal Comfort and IAQ from Occupant-Centric Building Controls

Meng Kong, Bing Dong, Jianshun Zhang, Xuezheng Wang

Syracuse University, United States of America

11:35am
-
12:00pm
Poster introductions 17: Heat and moisture transfer - experimental
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Hans Janssen, KU Leuven
 
11:35am - 11:38am

In-situ measurements of the U-value of a ventilated wall assembly

Mohammad Rahiminejad, Dolaana Khovalyg

École polytechnique fédérale de Lausanne, Switzerland



11:38am - 11:41am

The Hybrid-Agile Design of Experiments Methodology

Klodian Gradeci, Malin Sletnes

SINTEF AS, Norway

Poster introductions 07: IAQ, health, sleep quality
Location: Room 2 - Room 011, Building: 116
Chair: Dr. Jiyun Song, University of Hong Kong
 
11:35am - 11:38am

Modelling mean radiant temperature in outdoor environments: contrasting the approaches of different simulation tools

Elena Badino, Maria Ferrara, Louena Shtrepi, Enrico Fabrizio, Arianna Astolfi, Valentina Serra

Politecnico di Torino, Italy



11:38am - 11:41am

Difference of Cooling Use during Sleep between Elderly and Young Peopl

Noriko Umemiya, Kae Terao, Yuhang Chen

Osaka City University, Japan



11:41am - 11:44am

Improving indoor thermal comfort, air quality and the health of older adults through environmental policies in London

Ioanna Tsoulou1, Phil Symonds1, Jonathon Taylor2, Nahid Mohajeri1, Michael Davies1

1: UCL, United Kingdom; 2: Tampere University, Finland



11:44am - 11:47am

Curing building related illnesses by using an emissions barrier

Lennart Larsson1, Johan Mattsson2, Timo Lehtimaa3

1: Lund University, Sweden; 2: cTrap Ltd, Sweden; 3: Sulin Oy, Finland



11:47am - 11:50am

How do occupants rate the bedroom air quality?

Chenxi Liao1,2, Xiaojun Fan2, Mariya Petrova Bivolarova2, Chandra Sekhar3, Mizuho Akimoto4, Jelle Laverge1, Pawel Wargocki2

1: Department of Architecture and Urban Planning, Ghent University, Belgium; 2: International Centre for Indoor Environment and Energy, Department of Civil Engineering, Technical University of Denmark, Denmark; 3: Department of Building, School of Design and Environment, National University of Singapore, Singapore; 4: Department of Architecture, Waseda University, Japan

Poster introductions 18: Solar radiation and energy
Location: Room 3 - Room 013, Building: 116
Chair: Gregers Reimann, IEN Consultants Sdn Bhd
 
11:35am - 11:38am

Study of the impact of the type, orientation and temperature of solar panels on their actual efficiency in the Latvian climate conditions

Daniels Marks Heincis, Andris Jakovics, Jevgenijs Telicko

University of Latvia, Institute of Numerical Modelling, Latvia



11:38am - 11:41am

Comparing statistical modeling techniques for heat loss coefficient estimation using in-situ data

Xiang Zhang, Katia Ritosa, Dirk Saelens, Staf Roels

KU Leuven, Department of Civil Engineering, Building Physics Section, Kasteelpark Arenberg 40 Bus 2447, 3001 Heverlee, Belgium



11:41am - 11:44am

Innovative approaches to thermochromic materials for adaptive building envelopes

Gloria Perez1, Valentina Serra2, Samira Garshasbi3, Fabio Favoino2, Paloma Sirvent1, Kwok Wei Shah4, Pablo La Roche5, Isabel Galán6, Mattheos Santamouris3

1: Institute of Construction Science Eduardo Torroja, Spain; 2: Politecnico di Torino, Italy; 3: University of New South Wales, Australia; 4: National University of Singapore, Singapore; 5: California State Polytechnic University Pomona, USA; 6: Graz University of Technology, Austria



11:44am - 11:47am

Control-oriented model for air-based BIPV/T systems

Anna-Maria Sigounis, Efstratios Dimitrios Rounis, Andreas Athienitis, Charalampos Vallianos

Concordia University, Montreal

Poster introductions 06: Urban environment, outdoor environment
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Eva B Møller, Technical University of Denmark
 
11:35am - 11:38am

Generating Residential Layout Based on AI in the View of Wind Environment

Xiaoyu Ying1,2, Xiaoying Qin1,2, Jiahui Chen1,2, Jing Gao1,2

1: Zhejiang University; 2: Zhejiang University City College



11:38am - 11:41am

Development of a predictive urban heat island model using vertical aspect of cities

Victor George Equere1, Parham A. Mirzaei1, Saffa Riffat1, Yilin Wang2

1: University of Nottingham, United Kingdom; 2: University College London, United Kingdom



11:41am - 11:44am

Mitigating and adapting to climate change with a taxonomy of smart urban surfaces

Zekun Li, Vivian Loftness

Carnegie Mellon University, United States of America



11:47am - 11:50am

Application of the TEAC software for analysis of Energy Flexible Building Clusters – a case study

Marcin Zygmunt, Dariusz Gawin

Lodz University of Lodz, Poland

Poster introductions 19: Energy consumption & optimization
Location: Room 5 - Room 019, Building: 116
Chair: Dr. Rongling Li, DTU Byg
 
11:35am - 11:38am

Energy performance assessment of passive buildings in future climatic scenarios: the case of study of the childcare centre in Putignano (Bari, Italy).

Ludovica Maria Campagna1, Francesco Carlucci1, Piero Russo2, Francesco Fiorito1

1: Department of Civil, Environmental, Land, Building Engineering and Chemistry (DICATECh), Polytechnic University of Bari, via Orabona 4, 70125 Bari, Italy; 2: Studio Tecnico “Piero Russo – Ingegneria ed Architettura”, Putignano (BA)



11:38am - 11:41am

Quantile regression using gradient boosted decision trees for daily residential energy load disaggregation

Benoit Delcroix, Simon Sansregret, Gilbert Larochelle Martin, Ahmed Daoud

Hydro-Quebec Research Institute, Canada



11:41am - 11:44am

Study of power demand forecasting of a hospital by ensemble machine learning

Mayuka Nakai1, Ryozo Ooka1, Shintaro Ikeda2

1: University of Tokyo, Japan; 2: Tokyo University of Science

12:00pm
-
1:00pm
Lunch break II
1:00pm
-
1:30pm
Poster exhibition and Q&A 17: Heat and moisture transfer - experimental
Location: Room 1 - Room 082, Building: 116
Poster exhibition and Q&A 03: Thermal comfort
Location: Room 2 - Room 011, Building: 116
Poster exhibition and Q&A 13: Daylight, windows, glazing and shading
Location: Room 3 - Room 013, Building: 116
Poster exhibition and Q&A 11: Extreme climate & climate adaptation
Location: Room 4 - Room 015, Building: 116
Poster exhibition and Q&A 14: Energy consumption & optimization
Location: Room 5 - Room 019, Building: 116
1:30pm
-
2:00pm
Poster exhibition and Q&A12: Heat and moisture transfer - experimental
Location: Room 1 - Room 082, Building: 116
Poster exhibition and Q&A 07: IAQ, health, sleep quality
Location: Room 2 - Room 011, Building: 116
Poster exhibition and Q&A 18: Solar radiation and energy
Location: Room 3 - Room 013, Building: 116
Poster exhibition and Q&A 06: Urban environment, outdoor environment
Location: Room 4 - Room 015, Building: 116
Poster exhibition and Q&A 19: Energy consumption & optimization
Location: Room 5 - Room 019, Building: 116
2:00pm
-
3:30pm
Session 22: Mould growth and related issues
Location: Room 2 - Room 011, Building: 116
Chair: Dr. Petter Wallentén, Lund University
 
2:00pm - 2:15pm

Influence of the mold growth on the crystallographic composition of hemp mortar

Dmytro KOSIACHEVSKYI1,2, Kamilia ABAHRI1, Anne DAUBRESSE2, Evelyne PRAT3, Mohend CHAOUCHE1

1: Université Paris-Saclay, ENS Paris-Saclay, CNRS, LMT - Laboratoire de Mécanique et Technologie, 91190, Gif-sur-Yvette, France; 2: Centre d’Innovation Parexgroup, 38070 St Quentin Fallavier, France; 3: Sika Technology AG, Tüffenwies 16, 8048 Zürich, Switzerland



2:15pm - 2:30pm

Effects of different light wavelengths on mold growth in tomb

Xiaohan Zhou1, Yonghui LI1, HOKOI Shuichi2

1: Southeast university, China, People's Republic of; 2: School of Architecture Internationalization Demonstration, Southeast University, Nanjing, China



2:30pm - 2:45pm

Development of moisture reference years for assessing long-term mold growth risk of wood framed building envelopes

Lin Wang, Maurice Defo, Abhishek Gaur, Michael Lacasse

National Research Council Canada, Canada



2:45pm - 3:00pm

Case study of fungal growth on newly cast concrete decks

Sofie Marie Kristensen1, Anne Pia Koch1, Julie Koch Sheard2, Ulf Thrane3

1: Danish Technological Institute, Department of Building and Environment, Denmark; 2: Unafilliated, Copenhagen, Denmark; 3: Danish Technological Institute, Department of Wood and Bio Based Materials, Denmark



3:00pm - 3:15pm

Impact of moisture and mould growth on a CLT structure using weather protection

Charlotte Svensson Tengberg1,2, Åsa Bolmsvik2

1: Chalmers University of Technology, Sweden; 2: Skanska Sweden, Sweden



3:15pm - 3:30pm

Moisture safety in ventilated cathedral roofs

Gabriel Odén1, Gustav Månhardt2, Petter Wallentén3, Martina Stockhaus1

1: PE Teknik & Arkitektur AB; 2: Structor Bygg Malmö AB; 3: Lund University, Sweden

Session 23: ZEB (zero energy buildings)
Location: Room 3 - Room 013, Building: 116
Chair: Prof. Arild Gustavsen, NTNU
 
2:00pm - 2:15pm

Energy and environmental evaluation of retrofitting façades for Zero Energy Buildings in the Mediterranean region

Effrosyni Giama, Elli Kyriaki, Panagiota Antoniadou, Maria Symeonidou, Agis Papadopoulos

Aristoteles University of Thessaloniki, Greece



2:15pm - 2:30pm

The ZEB Laboratory: a research tool for future climate adapted zero emission buildings

Alessandro Nocente1, Berit Time1, Hans Martin Mathisen2, Tore Kvande2, Arild Gustavsen2

1: Sintef AS, Trondheim, Norway; 2: NTNU, Trondheim, Norway



2:30pm - 2:45pm

Role of onsite thermal and electric storage in nZEBs

Fabian Ochs, Mara Magni, Elisa Venturi, Alice Tosatto

University of Innsbruck, Austria



2:45pm - 3:00pm

The Costs and Benefits of an Irish Low-Energy Social Housing Deep Energy Retrofit case study

Shane Colclough

Ulster University, United Kingdom



3:00pm - 3:15pm

Experimental and numerical assessment for HVAC management in an industrial building: a preliminary optimization

Ettore Stamponi1, Nicola Lattanzi1, Elisa Moretti2

1: CIRIAF - Interuniversity Research Centre, University of Perugia, Via G. Duranti 63 (Perugia, Italia); 2: Department of Engineering – University of Perugia, Via G. Duranti 93 (Perugia, Italia)



3:15pm - 3:30pm

''Analysing energy upgrading projects of single-family houses towards a Norwegian nZEB level

ROBERTA MOSCHETTI1, BERIT TIME1, LARS GULLBREKKEN1, VEGARD HEIDE2, LAURENT GEORGES2, ANNE GUNNARSHAUG LIEN1

1: SINTEF Community, Postboks 4760 Torgarden, 7465 Trondheim, Norway; 2: Department of Energy and Process Engineering, Faculty of Engineering, Norwegian University of Science and Technology (NTNU), Kolbjørn Hejes vei 1a, 7034 Trondheim, Norway

Session 21: Glazing & shading technologies
Location: Room 4 - Room 015, Building: 116
Chair: Ulrike Passe, Iowa State University
 
2:00pm - 2:15pm

Electrochromic Glass system in Norwegian Climate: Control strategies and Impact on the indoor thermal conditions

Alessandro Nocente, Steinar Grynning, Lars Gullbrekken

Sintef AS, Norway



2:15pm - 2:30pm

In-situ performance evaluation of historic box-type windows with vacuum glazing

Matthias Schuss1, Ulrich Pont1, Magdalena Wölzl1, Peter Schober2, Ardeshir Mahdavi1

1: Department of Building Physics and Building Ecology, TU Wien, Vienna, Austria; 2: Austrian Forest Products Research Society (Holzforschung Österreich), Vienna, Austria



2:30pm - 2:45pm

Advancements in glazing coating technologies

Khaled khaled, Umberto Berardi

Ryerson University, Canada



2:45pm - 3:00pm

Parametric Energy Simulation of Solar-NIR selective Glazing Systems

Qiuhua Duan1, Enhe Zhang1, Laura Hinkle1, Julian Wang1,2

1: Department of Architectural Engineering, The Pennsylvania State University, United States of America; 2: Materials Research Institute, The Pennsylvania State University, United States of America



3:00pm - 3:15pm

Energy-saving and comfort improvements to the control of residential Venetian blinds

Joseph Roberts1,2, Giuseppe De Michele1, Giovanni Pernigotto2, Andrea Gasparella2, Stefano Avesani1

1: Eurac Research, Italy; 2: Free University of Bozen-Bolzano, Italy



3:15pm - 3:30pm

Electrochromic window integration in adaptive building envelopes in different climates: a genetic optimization of switchable glazing parameters to reduce energy consumptions in office buildings.

Francesco Carlucci1, Alessandro Cannavale2,3, Francesco Fiorito1

1: Department of Civil, Environmental, Land, Building Engineering and Chemistry, Polytechnic University of Bari, 70125 Bari, Italy; 2: Department of Sciences in Civil Engineering and Architecture, Polytechnic University of Bari, 70125 Bari, Italy.; 3: Istituto di Nanotecnologia, CNR Nanotec, Via Arnesano 16, 73100 Lecce, Italy.

Session 24: Building simulations
Location: Room 5 - Room 019, Building: 116
Chair: William Stuart Dols, NIST
 
2:00pm - 2:15pm

Semi-automatic geometry modeling: faster and streamlined building simulation models

Nanna Dyrup Svane1,2, Artüras Pranskunas1, Lars Broder Lindgren2, Rasmus Lund Jensen1

1: Aalborg University; 2: MOE A/S



2:15pm - 2:30pm

Validation of the simplified heat conduction model of EN ISO 52016-1

Giovanna De Luca, Franz Giorgio Maria Bianco Mauthe Degerfeld, Ilaria Ballarini, Vincenzo Corrado

Politecnico di Torino, Italy



2:30pm - 2:45pm

A case study on the impact of fixed parameter values in the modelling of indoor overheating

Giorgos Petrou1, Anna Mavrogianni2, Phil Symonds2, Mike Davies2

1: UCL, Energy Institute, London, United Kingdom; 2: UCL, Institute of Environmental Design and Engineering, London, United Kingdom



2:45pm - 3:00pm

Simulating heat load profiles in buildings using mixed effects models

Jaume Palmer Real1, Jan Kloppenborg Møller1, Christoffer Rasmussen1, Karen Byskov Lindberg2, Igor Sartori2, Henrik Madsen1

1: DTU, Denmark; 2: SINTEF, Norway



3:00pm - 3:15pm

Heat, Moisture and Air coupled Model for Historical Building

Guoli Zhao1, Huarong Xie1, Changchang Xia1, Shuichi Hokoi2, Yonghui Li1

1: School of Architecture,Southeast University, Nanjing,China; 2: School of Architecture Internationalization Demonstration, Southeast University, Nanjing, China



3:15pm - 3:30pm

Optimizing occupant-centric building controls given stochastic occupant behaviour

zeinab khorasani zadeh, Mohamed Ouf

Concordia University, Canada

Workshop II: Healthy, Durable and Sustainable Buildings – Augmented by Building Physics
Location: Auditorium - Room 082, Building: 116
Chair: Dr. Freja Nygaard Rasmussen, Aalborg University
Speakers:
  • Senior Indoor Climate Consultant, Ambra Guglietti, VELUX A/S
  • Development Manager, Susanne Højholt, Phønix Tag Materialer A/S
Please use this Zoom-link to participate in the session.
3:30pm
-
4:00pm
Coffee break IV
4:00pm
-
5:30pm
Session 26: Moisture in buildings and its risks
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Thomas Bednar, TU Wien
 
4:00pm - 4:15pm

Process induced building defects in Norway – development and climate risks

Nora Schjøth Bunkholt1, Lars Gullbrekken1, Berit Time1, Tore Kvande2

1: SINTEF, Norway; 2: NTNU, Norway



4:15pm - 4:30pm

Comparison of indoor moisture excess in three different terraced housing projects

Christoph Harreither1,2, Joe Gengler2, Thomas Bednar1

1: TU Wien - Vienna University of Technology, Austria, Faculty of Civil Engineering; 2: University of Applied Sciences Upper Austria, Wels, School of Engineering



4:30pm - 4:45pm

CIB W040: International Surveys of Architecture and Engineering Consultants for Moisture Safety in Buildings

Naomi Morishita-Steffen1, Anssi Laukkarinen2, Thomas Lewis1, Ruut Peuhkuri3, Sabine Wolny1, Juha Vinha2, Thomas Bednar1

1: TU Wien, Institute of Material Technology, Building Physics, and Building Ecology, Research Unit of Building Physics; 2: Tampere University, Faculty of Built Environment, Civil Engineering, Building Physics; 3: Aalborg University Copenhagen, Civil Engineering and Construction Management, BUILD - Department of the Built Environment



4:45pm - 5:00pm

Damage risk assessment of building materials with moisture hysteresis

Michele Libralato1, Alessandra De Angelis1, Paola D'Agaro1, Giovanni Cortella1, Menghao Qin2, Carsten Rode2

1: Polytechnic Department of Engineering and Architecture, University of Udine, Italy; 2: Department of Civil Engineering, Technical University of Denmark, Denmark



5:00pm - 5:15pm

Pore-scale investigation of dynamic effects on the moisture retention curve during spontaneous imbibition

Michele Bianchi Janetti1,2, Hans Janssen2

1: University of Innsbruck, Austria; 2: KU Leuven, Belgium

Session 27: Thermal comfort studies
Location: Room 2 - Room 011, Building: 116
Chair: Prof. Jørn Toftum, Technical University of Denmark
 
4:00pm - 4:15pm

Factors influencing the perception of the thermal and visual indoor environment

Jørn Toftum1, Anders Thorseth1, Asta Logadottir2, Jakob Markvart3, Sophie Stofffer3

1: Technical University of Denmark, Denmark; 2: LOTA Engineering, Iceland; 3: Aalborg University, Denmark



4:15pm - 4:30pm

Too Hot to Stay at Home: Residential Heat Vulnerability in Urban India

Aditi Agarwal, Holly Samuelson

Harvard University Graduate School of Design, United States of America



4:30pm - 4:45pm

Experimental investigation of occupants’ thermal sensation under a personalized ventilation system

Peyman Ebrahimi Naghani1, Seyed Alireza Zolfaghari1, Mehdi Maerefat2, Jørn Toftum3, Seyed Mohammad Hooshmand1, Mostafa Izadi1

1: University of Birjand, Iran; 2: Tarbiat Modares University, Iran; 3: Technical University of Denmark



4:45pm - 5:00pm

A field study on summertime overheating of six schools in Montreal Canada

Zihan Xie1, Chang Shu1, Ben Zegen Reich1, Lin Wang1, Daniel Brail1, Lili Ji1, Senwen Yang1, Xuechen Bai1, Radu Zmeureanu1, Michael Lacasse2, Liangzhu Wang1, Hua Ge1

1: Centre for Zero Building Energy Studies, Department of Building, Civil and Environmental Engineering, Gina Cody School of Engineering and Computer Science, Concordia University, Montreal, Qc, Canada; 2: National Research Council Canada



5:00pm - 5:15pm

Indoor environmental quality and global comfort: an in-field study in workspaces

Giuseppina Emma Puglisi, Giorgia Spigliantini, Niccolò Oggiani, Louena Shtrepi, Marco Carlo Masoero, Stefano Paolo Corgnati, Arianna Astolfi

Politecnico di Torino, Italy

Session 25: Energy performance & consumption
Location: Room 3 - Room 013, Building: 116
Chair: Prof. John Grunewald, TU Dresden
 
4:00pm - 4:15pm

The effect of weighting factors on income-related energy inequalities: The case of Sweden’s new building code

Jenny von Platten1,2, Mikael Mangold1, Kristina Mjörnell2,3

1: Division of Built Environment, RISE Research Institutes of Sweden; 2: Department of Building and Environmental Technology, Faculty of Engineering, Lund University; 3: Business and Innovation area Sustainable Cities and communities, RISE Research Institutes of Sweden



4:15pm - 4:30pm

Investigating the relationship between residential AC, indoor temperature and relative humidity in Indian dwellings

Rajat Gupta1, Anu Antony1, Vishal Garg2, Jyotirmay Mathur3

1: Low Carbon Building Research Group, School of Architecture, Oxford Brookes University, United Kingdom; 2: IIIT Hyderabad, India; 3: MNIT Jaipur, India



4:30pm - 4:45pm

Domestic hot water system in residential buildings: production, distribution and taping energy loss. Monitoring campaign in three Danish single family houses.

Anna Marszal-Pomianowska, Rasmus Lund Jensen, Michal Pomianowski, Olena Kalyanova Larsen, Jacob Scharling Jørgensen, Sofie Sand Knudsen

Department of the Built Environment, Aalborg University, Denmark



4:45pm - 5:00pm

A probabilistic approach to include the overall efficiency of gas-fired heating systems in urban building energy modelling

Katia Ritosa1, Ina De Jaeger1,2,3, Dirk Saelens1,2, Staf Roels1

1: Building Physics and Sustainable Design, Department of Civil Engineering, KU Leuven, Belgium; 2: EnergyVille, Belgium; 3: Flemish Institute for Technological Research (VITO), Belgium



5:00pm - 5:15pm

A novel concept for energy-efficient floor heating systems with minimal hot water return temperatures

Kevin Michael Smith, Nan Hu, Dorte Skaarup Østergaard, Svend Svendsen

Department of Civil Engineering, Technical University of Denmark, Denmark



5:15pm - 5:30pm

Establishing Requirements to Thermal Energy System Resilience for Cold/Arctic Climates

Alexander Zhivov1, Richard Liesen1, Brianna Morton1, Brandy Diggs-McGee1, Bjorn Oberg1, Angela Urban1, Emmette Leffel2, Dayne Broderson3

1: US Army Engineer Research and Development Center, United States of America; 2: Alaska Thermal Imaging, United States of America; 3: University of Alasks, Fairbanks, United States of America

Session 29: Humidity control
Location: Room 5 - Room 019, Building: 116
Chair: Prof. Wahid Maref, ETS - University of Quebec
 
4:00pm - 4:15pm

Determining the impact of sensor orientation on moisture content measurements in Eastern White Pine

Belal Daouk, Christopher Baldwin, Cynthia Cruickshank

Carleton University



4:15pm - 4:30pm

Influence of the disparities between lab and in-situ application on the penetration depth of a hydrophobic agent

Daan Deckers1,2, Evy Vereecken1,2, Staf Roels1, Hans Janssen1

1: Building Physics and Sustainable Design, Department of Civil Engineering, KU Leuven, Kasteelpark Arenberg 40, 3001 Leuven, Belgium; 2: Research Foundation (FWO) - Flanders, Belgium



4:30pm - 4:45pm

Development of an autonomous humidity control material by using metal-organic frameworks (MOFs)

Pumin Hou, Menghao Qin

DTU, Denmark



4:45pm - 5:00pm

Experimental investigation of a novel metal-organic framework (MOF) based humidity pump under high humidity conditions

Kan Zu, Menghao Qin

Technical University of Denmark, Denmark



5:00pm - 5:15pm

Study on ultrasonic assisted regeneration of activated alumina — A potential technology used in dehumidification system

Xinzhu Mou1, Zhenqian Chen1,2, Lin Wei3

1: School of Energy and Environment, Southeast University, Nanjing, 210096, PR China; 2: Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, PR China; 3: Jiangsu Institute of Urban Planning and Design, Nanjing, 210036, PR China

 
6:30pm
-
7:00pm
Walk to restaurant. Drinks
See walking path on map.
7:00pm
-
9:00pm
Conference dinner: Brede Spisehus, I. C. Modewegs Vej 40, 2800 Kongens Lyngby
Date: Friday, 27/Aug/2021
8:30am
-
10:00am
Plenary session III: Bio-based solutions - benefits and challenges
Location: Auditorium - Room 082, Building: 116
Chair: Dr. Ruut Hannele Peuhkuri
Keynote speaker: Professor Dominique Derome, Université de Sherbrooke, Canada
Keynote speaker: Associate Professor Emil Engelund Thybring, University of Copenhagen, Denmark
Moderator: Ruut H. Peuhkuri, Research Director, Aalborg University, Denmark
10:00am
-
10:30am
Coffee break V
10:30am
-
12:00pm
Session 30: Refurbishment & energy retrofit
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Arnold Louis Janssens, Ghent University UGent
 
10:30am - 10:45am

Internal Insulation of preservation worthy facades

Kristian Koldtoft1, Svend Svendsen2, Fabricio Gasparin Lucchesi3

1: Saint-Gobain Denmark ISOVER, Denmark; 2: Technical University of Denmark, Denmark; 3: Hygge Engenharia



10:45am - 11:00am

Assessing the building envelope performance of a renovated historical dwelling using a coheating test

Stijn Van de Putte1, Eline Himpe1, Jasper Nonneman2, Marijke Steeman1, Arnold Janssens1

1: Department of Architecture and Urban Planning, Ghent University, Belgium; 2: Department of Flow, Heat and Combustion Mechanics, Ghent University, Belgium



11:00am - 11:15am

Recent progress of the SPIDER – project: Aspects of subtractive approaches to existing building’s performance improvement

Bernhard Sommer1, Ulrich Pont2, Galo Moncayo1, Peter Bauer2, Jakob Braun1, Malgorzata Sommer-Nawara1, Irene Prieler1, Thomas Brus1, Ardeshir Mahdavi2

1: University of Applied Arts Vienna, Austria; 2: TU Wien, Austria



11:15am - 11:30am

Desalination using clay and lime sacrificial plasters with additives on field stone wall and fired clay bricks

Kadri Leiten, Helari Sirelpuu, Mihkel Kiviste

Estonian University of Life Sciences, Estonia



11:30am - 11:45am

Heating the Dutch housing stock without natural gas

Frans Koene

TNO, Netherlands, The

Session 34: IAQ, ventilation & pollutants
Location: Room 2 - Room 011, Building: 116
Chair: Prof. Xudong Yang, Tsinghua University
 
10:30am - 10:45am

Numerical Assessment of Seven Ventilation Systems for Social Residential Buildings based on Indoor Air Quality and Energy Consumption

Guillaume Sérafin, Marc Abadie, Patrice Joubert

LaSIE UMR CNRS 7356, La Rochelle Université



10:45am - 11:00am

Indoor air quality evaluation in naturally cross-ventilated buildings for education using age of air

Sonny F. Díaz-Calderón1, J. Antonio Castillo2, Guadalupe Huelsz1

1: Universidad Nacional Autónoma de México, Mexico; 2: Universidad de Sonora, Mexico



11:00am - 11:15am

On the Benefits of Whole-building IAQ, Ventilation, Infiltration and Energy Analysis Using Co-simulation between CONTAM and EnergyPlus

William Stuart Dols1, Chad W. Milando2, Lisa Ng1, Steven J. Emmerich1

1: NIST, United States of America; 2: Boston University, School of Public Health, USA



11:15am - 11:30am

IEA EBC Annex 68 – Consequences on ventilation and hygrothermal operation of buildings

Carsten Rode, Daria Zukowska-Tejsen, Jakub Kolarik

Technical University of Denmark, Denmark



11:30am - 11:45am

Development of a Natural Soil Depressurization System Sizing Tool

Marc Abadie1, Zaid Romani1, Michel Burlot1, Jérôme Nicolle2, Pierre Peigné3, Lionel Druette3, Bernard Collignan4, Francis Allard1

1: LaSIE UMR CNRS 7356, La Rochelle Université, France; 2: TIPEE platform, Lagord, France; 3: CERIC, Saint-Symphorien, France; 4: CSTB Environment-Health Division, Grenoble, France

Session 32: Urban environment, outdoor environment
Location: Room 3 - Room 013, Building: 116
Chair: Prof. Holger Koss
 
10:30am - 10:45am

Multivariate analysis of the influence between building design and energy performance, socio-demographic metrics, and the intra-urban environment

Maider Llaguno-Munitxa1, Xin Shu2, Bhavan Mistry2

1: UCLouvain, Belgium; 2: Northeastern University, United States of America, Belgium



10:45am - 11:00am

Importance of Microscale Climate Simulations in City Scale Overheating Assessments

Chang Shu1, Abhishek Gaur2, Michal Bartko2, Abdelaziz Laouadi2, Lili Ji1, Michael Lacasse2, Liangzhu {leon} Wang1

1: Concordia University, Canada; 2: Construction Research Centre, National Research Council Canada



11:00am - 11:15am

Mitigation measures for urban heat island and their impact on pedestrian thermal comfort

Aytac Kubilay1, Dominik Strebel1, Dominique Derome2, Jan Carmeliet1

1: ETH Zurich, Switzerland; 2: Université de Sherbrooke, Canada



11:15am - 11:30am

The impact of the spatio-temporal morphology of urban green infrastructure on urban building energy consumption: A case study in the hot-summer-cold-winter climate

Sijie Zhu1,2, Yanxia Li1,2, Chao Wang1,2, Xinkai Zhang3,4, Xing Shi3,4

1: School of Architecture, Southeast University, Nanjing, China; 2: Key Laboratory of Urban and Architectural Heritage Conservation, Ministry of Education, Nanjing, China; 3: College of Architecture and Urban Planning, Tongji University, Shanghai, China; 4: Key Laboratory of Ecology and Energy-saving Study of Dense Habitat (Tongji University), Ministry of Education, China



11:30am - 11:45am

Development of Integrated Urban Greenery Cover for Enhancing Microclimate Thermal Performance

Mohamed Dardir, Umberto Berardi

Ryerson University, Canada



11:45am - 12:00pm

An automated workflow for urban greening based on photosynthetic radiation modeling.

Mili Kyropoulou1, Sarith Subramaniam2, Sabine Hoffmann2

1: University of Houston, United States of America; 2: Technische Universität Kaiserslautern, Kaiserslautern, Germany

Session 33: Historical buildings & heritage conservation
Location: Room 4 - Room 015, Building: 116
Chair: Dr. Ernst Jan de Place Hansen, Aalborg University
 
10:30am - 10:45am

Historic Indoor Microclimate, the role of HVAC in heritage buildings’ restoration: the case of the Palace of Venaria Reale.

Anna Bonora, Kristian Fabbri, Marco Pretelli

University of Bologna Alma Mater Studiorum, Italy



10:45am - 11:00am

Hygrothermal assessment of internally insulated historic solid masonry walls with focus on the thermal bridge due to internal partition walls

Nickolaj Feldt Jensen1,2, Carsten Rode1, Eva B. Møller1

1: Technical University of Denmark, Department of Civil Engineering, Brovej, Building 118, 2800 Kgs. Lyngby; 2: Aalborg University, Department of the Built Environement, 2450 Copenhagen, Denmark



11:00am - 11:15am

Active Environmental Conditioning Strategies for Brick Historical Buildings, Combining Heritage Conservation and Thermal Comfort

Yike Cai1, Huarong Xie1, Yan Ma1, Shuichi Hokoi1, Yonghui Li1,2

1: School of Architecture,Southeast University, Nanjing, PR China; 2: Key Laboratory of Urban and Architectural Heritage Conservation of Ministry of Education (Southeast University), Nanjing, PR China



11:15am - 11:30am

Diurnal winter thermal profiles and thermal comfort in historical housing – mixed methods field study.

Magdalena Baborska-Narożny, Marta Laska, Natalia Fidrów-Kaprawy, Małgorzata Małyszko

Wroclaw University of Science and Technology, Poland



11:30am - 11:45am

Assessment of Deterioration Risk of Maijishan Grotto under the Radiation Difference Based on Heat and Moisture Transfer Model

Ruobin Wu1, Yan Ma1, Huarong Xie1, Shuichi Hokoi2, Yongqiang Yue3, Yonghui Li1

1: School of Architecture, Southeast University, Nanjing, 210096, China; 2: School of Architecture Internationalization Demonstration, Southeast University, Nanjing, 210096, China; 3: Art Institute of Maijishan Grotto, Gansu, Tianshui, 620503, China



11:45am - 12:00pm

Hygrothermal Evaluation of Waterline Rising of a Masonry Tower based on Measurements and Simulations

QIHUA XIE1, HUARONG XIE1, YAN MA1, SHUICHI HOKOI1, YONGHUI LI2

1: School of Architecture, Southeast University, 210096,Nanjing, China; 2: School of Architecture Internationalization Demonstration, Southeast University,210096 Nanjing, China

Session 31: Innovative cooling systems
Location: Room 5 - Room 019, Building: 116
Chair: Dr. Daisuke Ogura, Kyoto University
 
10:30am - 10:45am

An experimental study of condensation on superhydrophobic surface materials used for cooled ceiling panels under indoor conditions

Ziwen Zhong1, Jianlei Niu1, Wei Ma2, Shuhuai Yao2, Meng Yang3, Zuankai Wang3

1: Department of Building Services Engineering, Hong Kong Polytechnic University, Hong Kong, China; 2: Department of Mechanical Engineering, The Hong Kong University of Science and Technology, Hong Kong, China; 3: Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China



10:45am - 11:00am

Laboratory tests of a prototypical user-centric radiant cooling solution

Helene Teufl, Matthias Schuss, Ardeshir Mahdavi

TU Wien, Austria



11:00am - 11:15am

Passive evaporative cooling through water filled bricks: a preliminary investigation

Ana Tejero-González1, Francesco Nocera2, Vincenzo Costanzo2, Eloy Velasco-Gómez1

1: Universidad de Valladolid, Spain; 2: University of Catania, Italy



11:15am - 11:30am

Preliminary Experimental Assessment of Building Envelope Integrated Ventilative Cooling design

Gediyon Moges Girma, Fitsum Tariku

British Columbia Institute of Technology, Canada



11:30am - 11:45am

Towards Multifunctional Building Elements: Thermal Activation of a Composite Interior GFRP Slab

Dolaana Khovalyg1, Alexandre Mudry1, Madeline Pugin1, Thomas Keller2

1: Thermal Engineering for the Built Environment (TEBEL), École polytechnique fédérale de Lausanne (EPFL), Switzerland; 2: Composite Construction Laboratory (CCLab), École polytechnique fédérale de Lausanne (EPFL), Switzerland



11:45am - 12:00pm

Utilizing a novel mobile diagnostics lab to validate the impact of vegetative wall coverings in building cooling load reduction

Ulrike Passe, Oluwatobiloba Fagbule, Rushi Patel, Janette Thompson

Iowa State University, United States of America

12:00pm
-
1:00pm
Lunch break III
1:00pm
-
2:30pm
Session 35: Energy demand modelling and prediction
Location: Room 1 - Room 082, Building: 116
Chair: Prof. Angela Sasic Kalagasidis, Chalmers University of Technology
 
1:00pm - 1:15pm

Energy demand prediction with machine learning supported by auto-tuning: a case study

Sorana Ozaki1, Ryozo Ooka1, Shintaro Ikeda2

1: The University of Tokyo, Japan; 2: Tokyo University of Science, Japan



1:15pm - 1:30pm

Anomaly detection and missing data imputation in building energy data for automated data pre-processing

Ken Takahashi1, Ryozo Ooka2, Shintaro Ikeda3

1: Department of Architecture, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505, Japan; 2: Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505, Japan; 3: Tokyo University of Science, 6-3-1, Niijuku, Katsushika-ku, Tokyo 125-8585, Japan



1:30pm - 1:45pm

Designing a 24 h perturbation method for highly accurate estimation of a building heat transfer coefficient

Sarah Juricic, Jeanne Goffart, Simon Rouchier

Université SavoieMont-Blanc, France

Session 37: Health and environment
Location: Room 2 - Room 011, Building: 116
Chair: Dr. Jianshun Zhang, Syracuse University
 
1:00pm - 1:15pm

Comfortable and safe environments for people with autism: preliminary analysis of risks and definition of priorities in the design phase

Luca Zaniboni, Arianna Marzi, Marco Caniato, Andrea Gasparella

Free University of Bozen-Bolzano, Italy



1:15pm - 1:30pm

Investigating the link between home energy efficiency and self-reported health

Philip Symonds1, Nanda Verschoor2, Zaid Chalabi1, Jon Taylor3, Lu Shuyue1, Michael Davies1

1: University College London, United Kingdom; 2: CFP Green Buildings, Apeldoorn, Netherlands; 3: Tampere University, Finland



1:30pm - 1:45pm

Study on thermophysiological model suitable for health assessment of showering environment in China

Yuan Ying1, Pengcheng Shi1, Yonghui Li1, Chenhao Duan1, Xue Tan1, Shuichi Hokoi2

1: School of Architecture, Southeast University, 210000 Nanjing, Jiangsu Province, P.R. China; 2: Architecture Internationalization Demonstration School, Southeast University, 210000 Nanjing, Jiangsu Province, P.R. China



1:45pm - 2:00pm

Development and test of a combined radon sub-slab suction and sub-slab drainage system

Britt Haker Høegh, Thor Hansen, Stig Clausen

Danish Technological Institute, Denmark



2:00pm - 2:15pm

Numerical and experimental investigation of the impact formaldehyde buffering capacity of hemp concrete on IAQ

Anh Dung TRAN LE1, Jianshun S ZHANG2, Zhenlei LIU2, Bing Beverly GUO2, Thierry LANGLET1

1: Laboratoire des Technologies Innovantes, EA 3899 – Université de Picardie Jules Verne, IUT Amiens, Avenue des Facultés – Le Bailly, 80025 Amiens Cedex 1, France; 2: Department of Mechanical and Aerospace Engineering, Syracuse University, 263 Link Hall, Syracuse University, Syracuse, NY 13244 U.S.A

Session 36: Benchmarking & environmental impact
Location: Room 3 - Room 013, Building: 116
Chair: Dr. Hua Ge, Concordia University
 
1:00pm - 1:15pm

Circularity concepts for offsite prefabricated energy renovation of apartment buildings

Kalle Kuusk2,1, Kristel Kullerkupp1, Peep Pihelo1, Michiel Ritzen3, Ana Tisov4, Targo Kalamees2,1

1: nZEB Research Group, Tallinn University of Technology, Estonia; 2: Smart City Center of Excellence (Finest Twins), Tallinn University of Technology, Estonia; 3: Zuyd University of Applied Sciences, The Netherlands; 4: Huygen Installatie Adviseurs, Netherlands



1:15pm - 1:30pm

Benchmarking heat consumption in multi-storey residential buildings

Jørgen Rose, Ole Michael Jensen, Jesper Kragh

Aalborg University, Denmark



1:30pm - 1:45pm

A NEW FLEXIBLE, MODULAR AND CIRCULAR WAY OF BUILDING AND LIVING: THE MOBBLE

Laura Landuyt, Stéphane Lauwerys, Sven De Turck, Marijke Steeman, Nathan Van Den Bossche

Ghent University, Building Physics Research Group, Belgium



1:45pm - 2:00pm

A preliminary scenario analysis of the impacts of teleworking on energy consumption and greenhouse gas (GHG) emissions

Farzam Kharvari, Sara Azimi, William O'Brien

Department of Civil and Environmental Engineering, Carleton University, Ottawa, Canada

Session 28: Moisture, HAM
Location: Room 4 - Room 015, Building: 116
Chair: Prof. Menghao Qin, DTU
 
1:00pm - 1:15pm

Hygrothermal simulation and risk evaluation-The impact of discretization on numerical results and performance

Andreas Sarkany, Thomas Bednar

TU Wien, Austria



1:15pm - 1:30pm

Influences on the drying behavior of a concrete ceiling below a cold attic.

Thomas Lewis, Andreas Sarkany, Thomas Bednar, Ernst Heiduk, Manfred Grüner, Harald Hofbauer

TU Wien, Austria



1:30pm - 1:45pm

Heat and Moisture Modelling of Exterior Insulated Wall Assemblies with Vacuum Insulation

Brock Conley, Cynthia A. Cruickshank, Christopher Baldwin

Mechanical and Aerospace Engineering, Carleton University, Ottawa, Canada



1:45pm - 2:00pm

A mathematical model for predicting the indoor moisture variation by using moisture buffering theory

Kan Zu, Menghao Qin

Technical University of Denmark, Denmark

 
2:30pm
-
2:45pm
Coffee break VI
2:45pm
-
3:15pm
Closing session: Closing session
Location: Auditorium - Room 082, Building: 116
Chair: Prof. Carsten Rode, Technical University of Denmark
Co-chair:
  • Menghao Qin
Please use this Zoom-link to join the Closing Session.
https://dtudk.zoom.us/j/64417166632
3:15pm
-
4:00pm
Meeting II: IABP General Assembly
Chair: Dr. Jianshun Zhang, Syracuse University
Co-chair: Prof. Carsten Rode, Technical University of Denmark
Please use this Zoom-link to join the General Assembly (same link as the Closing Session).

 
Contact and Legal Notice · Contact Address:
Privacy Statement · Conference: IBPC 2021
Conference Software - ConfTool Pro 2.6.142+TC
© 2001 - 2021 by Dr. H. Weinreich, Hamburg, Germany